Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Decoder Improvements for Fast Decoding of Low-Density Parity-Check Codes

Janik Frenzel

Published Jan 1, 2020• 0 citations
OpenAlex

Abstract

In this work, iterative decoders for Low-Density Parity-Check (LDPC) codes are analyzed and optimized for low computational complexity. LDPC block codes are now widely used in industry standards such as Wi-Fi or 5G New Radio (NR). Hence, there is a strong need for decoder concepts suitable for hardware designs. In addition, terminated LDPC convolutional codes are promising candidates for next-generation communication systems. The main theme of this work is to investigate low-overhead strategies for reducing the computational complexity of iterative decoders. Two aspects are considered for fast decoding of the LDPC block codes in 5G NR. Firstly, an efficient but simple-to determine update schedule for the iterative decoding process, i.e., the sequence of updates on different parts of a codeword, is proposed. Secondly, Early Termination (ET), i.e., an option to stop decoding before a maximal number of iterations is exhausted, is improved in two ways: On the one hand, a partial evaluation of the code’s Parity-Check (PC) equations speeds up the detection of valid codewords. On the other hand, a novel criterion detects when the decoding process is unlikely to converge and stops the decoding before a lot of resources are wasted on futile iterations. The combination of all techniques results in a decoder with significant reduction of the computational complexity compared to a decoder without these methods. Still, only few additional residual decoding errors are produced. This work also contains an analysis of various aspects of a Windowed Decoder (WD), which is a specialized decoder design for LDPC convolutional codes. A WD can be configured in even more ways than a decoder for block codes. The analysis in this work assumes a normalization of the computational complexity to a certain maximal value. With this setup, it is shown that a larger size of the decoding window may be preferable over a smaller size to minimize the computational complexity. Furthermore, various window update strategies (determining in which way the code symbol reliabilities are updated in each window) and variations of ET are compared to identify a well-suited WD configuration. Lastly, strategies with Dynamic Scheduling (DS) are considered to further reduce the computational complexity. A novel fixed approach derived from several DS strategies performs well without actual dynamic knowledge of the decoder state. All in all, the optimized WD configuration halves the computational complexity of a block decoder while maintaining an acceptable loss in the decoding performance measured by the number of residual decoding errors. A comparison of systems with Hybrid Automatic Repeat reQuest (HARQ) expands the scope of this work into the domain of error control by retransmissions. The analyzed systems make use of the decoder output, e.g., the final code-symbol reliabilities, to assemble dynamic retransmissions that are as short as possible and contain specifically selected code symbols. These systems stand in contrast to contemporary implementations of HARQ that only use imprecise feedback messages. Still, some compatibility with existing systems is achieved by assuming a limited feedback channel, which requires clever compression of the feedback information. A novel HARQ system is proposed, which evaluates the code’s PC equations to avoid the computational overhead of soft-value processing. The throughput with the proposed system is found to be improved compared to a reference system that evaluates code-symbol reliabilities. Finally, approximations of the accurate message-update rules of the Sum–Product Algorithm (SPA) are analyzed. With fixed-point arithmetic, Look-Up Tables (LUTs) are a promising approach to approximate functions that are costly to compute. It is shown that an optimized LUT with just nine entries can be used in a fixed-point decoder such that the decoding performance is close to that of a floating-point decoder with accurate message updates.

Related papers

A multistage scheduled decoder for short block length low-density parity-check codes

Nazanin Elhami-Khorasani

Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably

•Jan 1, 2007•0 citations

A Comparative Study on High Performance of LDPC Decoders for 5G Applications

Y. Sugandhi Naidu, P. Vijaya Lakshmi

5G technology new radios (5G NR) require high-speed decoders that operate on highly irregular low-density parity-check (LDPC) codes.LDPC decoders have gained significant attention due to their excellent error correction performance.This study evaluates on different algorithms and scheduling techniques used for LDPC decoders.The analysis highlights that Min-Sum-based approaches can reduce the computational complexity compared to the basic sum-product algorithm, while the normalized and extended Min-Sum algorithms provide a better trade-off owing to their accurate value assumptions.Furthermore, different scheduling methods are implied for MS to improve speed and reduce latency.This study provides a comparative analysis of the algorithms and architectures that yield high throughputs without compromising performance efficiency.The LNMS algorithm with a data-level rescheduling technique resolves data dependency issues.This resolves the complexity of CN and VN and improves the throughput, making it suitable for 5G NR applications.The decoded throughput achieved with this scheduling is 7.0 Gbps.This throughput is achieved by maintaining the standard parameters and worst case parameters, such as four/eight iterations, BG1, and a code rate of 0.8/0.5.The evaluated architectures are implemented on Field Programmable Gate Array (FPGA) devices.This study aids in selecting the optimal architecture and scheduling techniques for LDPC decoders by considering various performance standards to deploy wireless networks in 5G and beyond.

Journal of Engineering Science and Technology Review•Jun 1, 2026•0 citations

Low Complexity Stopping Criterion for LDPC Code Decoders

Frank Kienle, Norbert Wehn

Low density parity check (LDPC) codes are amongst the most powerful codes known today. They are decoded iteratively by a message-passing algorithm. For this, an inherent stopping criterion exists for decodable blocks based on parity checks. For undecodable blocks, typically, a fixed number of iterations are carried out before the decoding procedure is terminated, which is a waste of energy and time. We present a stopping criterion which detects undecodable blocks in an early stage of the decoding process. The novel stopping criterion works for floating and fixed point implementations. It greatly reduces the average number of required iterations without any loss in communication performance.

IEEE Vehicular Technology Conference•Dec 10, 2005•66 citations

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

•Jan 1, 2007•2 citations

Efficient algorithms for stochastic decoding of LDPC codes

Kuo-Lun Huang

The expanding demand for high-speed communications has resulted in development of high-throughput error-correcting techniques required by emerging communication standards. Low-Density Parity-Check (LDPC) codes are a class of linear block codes that achieve near-capacity performance and have been selected as part of many digital communication standards. Stochastic computation has been proposed as a hardware efficient approach for decoding LDPC codes. Using stochastic computation, all messages in the iterative decoding process are represented by Bernoulli sequences. Computations on these sequences are performed bit-by-bit using simple logic operations. Furthermore, serial messages used in stochastic decoders help alleviate routing congestion in hardware implementation of decoder. These factors make stochastic decoding a low complexity alternative to implement LDPC decoders. In this dissertation, we analyze the characteristics of stochastic decoding and propose reduced-latency designs for stochastic LDPC decoders to achieve improved performance on various channel models.

•Jan 1, 2016•2 citations

A new stopping criterion for fast low-density parity-check decoders

Tian Xia, Hsiao‐Chun Wu, Scott C-H Huang

Nonbiliary low-density parity-check (LDPC) codes can lead to excellent error performance while the codewords are of short or moderate length. However, the high decoding complexity of nonbiliary LDPC codes inevitably depreciates their practical values. The computational bottleneck arises from the check node processing in the iterative message passing (MP) algorithms which terminate when either all parity checks are satisfied or the maximum iteration number is reached. We have observed that for undecodable blocks, the MP algorithms always run up to the maximum iteration limit and therefore cannot generate the correct codeword. Thus, it would be better to terminate the algorithms early so as to save the unnecessary computational time and reduce the extra power consumption when undecodable blocks are experienced. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total a posteriori probability (APP) should increase as the iteration number grows. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while restricting the decoding performance degradation within 0.1 dB in low bit-energy-to-noise ratio scenarios.

Globecom•Dec 1, 2013•5 citations
In this work, iterative decoders for Low-Density Parity-Check (LDPC) codes are analyzed and optimized for low computational complexity. LDPC block codes are now widely used in industry standards such as Wi-Fi or 5G New Radio (NR). Hence, there is a strong need for decoder concepts suitable for hardware designs. In addition, terminated LDPC convolutional codes are promising candidates for next-generation communication systems. The main theme of this work is to investigate low-overhead strategies for reducing the computational complexity of iterative decoders. Two aspects are considered for fast decoding of the LDPC block codes in 5G NR. Firstly, an efficient but simple-to determine update schedule for the iterative decoding process, i.e., the sequence of updates on different parts of a codeword, is proposed. Secondly, Early Termination (ET), i.e., an option to stop decoding before a maximal number of iterations is exhausted, is improved in two ways: On the one hand, a partial evaluation of the code’s Parity-Check (PC) equations speeds up the detection of valid codewords. On the other hand, a novel criterion detects when the decoding process is unlikely to converge and stops the decoding before a lot of resources are wasted on futile iterations. The combination of all techniques results in a decoder with significant reduction of the computational complexity compared to a decoder without these methods. Still, only few additional residual decoding errors are produced. This work also contains an analysis of various aspects of a Windowed Decoder (WD), which is a specialized decoder design for LDPC convolutional codes. A WD can be configured in even more ways than a decoder for block codes. The analysis in this work assumes a normalization of the computational complexity to a certain maximal value. With this setup, it is shown that a larger size of the decoding window may be preferable over a smaller size to minimize the computational complexity. Furthermore, various window update strategies (determining in which way the code symbol reliabilities are updated in each window) and variations of ET are compared to identify a well-suited WD configuration. Lastly, strategies with Dynamic Scheduling (DS) are considered to further reduce the computational complexity. A novel fixed approach derived from several DS strategies performs well without actual dynamic knowledge of the decoder state. All in all, the optimized WD configuration halves the computational complexity of a block decoder while maintaining an acceptable loss in the decoding performance measured by the number of residual decoding errors. A comparison of systems with Hybrid Automatic Repeat reQuest (HARQ) expands the scope of this work into the domain of error control by retransmissions. The analyzed systems make use of the decoder output, e.g., the final code-symbol reliabilities, to assemble dynamic retransmissions that are as short as possible and contain specifically selected code symbols. These systems stand in contrast to contemporary implementations of HARQ that only use imprecise feedback messages. Still, some compatibility with existing systems is achieved by assuming a limited feedback channel, which requires clever compression of the feedback information. A novel HARQ system is proposed, which evaluates the code’s PC equations to avoid the computational overhead of soft-value processing. The throughput with the proposed system is found to be improved compared to a reference system that evaluates code-symbol reliabilities. Finally, approximations of the accurate message-update rules of the Sum–Product Algorithm (SPA) are analyzed. With fixed-point arithmetic, Look-Up Tables (LUTs) are a promising approach to approximate functions that are costly to compute. It is shown that an optimized LUT with just nine entries can be used in a fixed-point decoder such that the decoding performance is close to that of a floating-point decoder with accurate message updates.
Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably
5G technology new radios (5G NR) require high-speed decoders that operate on highly irregular low-density parity-check (LDPC) codes.LDPC decoders have gained significant attention due to their excellent error correction performance.This study evaluates on different algorithms and scheduling techniques used for LDPC decoders.The analysis highlights that Min-Sum-based approaches can reduce the computational complexity compared to the basic sum-product algorithm, while the normalized and extended Min-Sum algorithms provide a better trade-off owing to their accurate value assumptions.Furthermore, different scheduling methods are implied for MS to improve speed and reduce latency.This study provides a comparative analysis of the algorithms and architectures that yield high throughputs without compromising performance efficiency.The LNMS algorithm with a data-level rescheduling technique resolves data dependency issues.This resolves the complexity of CN and VN and improves the throughput, making it suitable for 5G NR applications.The decoded throughput achieved with this scheduling is 7.0 Gbps.This throughput is achieved by maintaining the standard parameters and worst case parameters, such as four/eight iterations, BG1, and a code rate of 0.8/0.5.The evaluated architectures are implemented on Field Programmable Gate Array (FPGA) devices.This study aids in selecting the optimal architecture and scheduling techniques for LDPC decoders by considering various performance standards to deploy wireless networks in 5G and beyond.
Low density parity check (LDPC) codes are amongst the most powerful codes known today. They are decoded iteratively by a message-passing algorithm. For this, an inherent stopping criterion exists for decodable blocks based on parity checks. For undecodable blocks, typically, a fixed number of iterations are carried out before the decoding procedure is terminated, which is a waste of energy and time. We present a stopping criterion which detects undecodable blocks in an early stage of the decoding process. The novel stopping criterion works for floating and fixed point implementations. It greatly reduces the average number of required iterations without any loss in communication performance.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
The expanding demand for high-speed communications has resulted in development of high-throughput error-correcting techniques required by emerging communication standards. Low-Density Parity-Check (LDPC) codes are a class of linear block codes that achieve near-capacity performance and have been selected as part of many digital communication standards. Stochastic computation has been proposed as a hardware efficient approach for decoding LDPC codes. Using stochastic computation, all messages in the iterative decoding process are represented by Bernoulli sequences. Computations on these sequences are performed bit-by-bit using simple logic operations. Furthermore, serial messages used in stochastic decoders help alleviate routing congestion in hardware implementation of decoder. These factors make stochastic decoding a low complexity alternative to implement LDPC decoders. In this dissertation, we analyze the characteristics of stochastic decoding and propose reduced-latency designs for stochastic LDPC decoders to achieve improved performance on various channel models.
Nonbiliary low-density parity-check (LDPC) codes can lead to excellent error performance while the codewords are of short or moderate length. However, the high decoding complexity of nonbiliary LDPC codes inevitably depreciates their practical values. The computational bottleneck arises from the check node processing in the iterative message passing (MP) algorithms which terminate when either all parity checks are satisfied or the maximum iteration number is reached. We have observed that for undecodable blocks, the MP algorithms always run up to the maximum iteration limit and therefore cannot generate the correct codeword. Thus, it would be better to terminate the algorithms early so as to save the unnecessary computational time and reduce the extra power consumption when undecodable blocks are experienced. In this paper, we propose a new T-tolerance stopping criterion for LDPC decoders by exploiting the fact that the total a posteriori probability (APP) should increase as the iteration number grows. Simulation results demonstrate that our proposed new T-tolerance criterion can greatly reduce the average iteration number (complexity) while restricting the decoding performance degradation within 0.1 dB in low bit-energy-to-noise ratio scenarios.