Abstract An efficient characterization of QND measurements is an important ingredient toward certifying and improving the performance and scalability of quantum processors. In this work, we introduce a parallel tomography of QND measurements that addresses single- and two-qubit readout on a multi-qubit quantum processor. We provide an experimental demonstration of the tomographic protocol on a 7-qubit IBM-Q device, characterizing the quality of conventional qubit readout as well as generalized measurements such as parity or measurement-and-reset schemes. Our protocol reconstructs the Choi matrices of the measurement processes, extracts relevant quantifiers—fidelity, QNDness, destructiveness—and identifies sources of errors that limit the performance of the device for repeated QND measurements. We also show how to quantify measurement crosstalk and use it to certify the quality of simultaneous readout on multiple qubits.
We introduce a self-consistent tomography for arbitrary quantum nondemolition (QND) detectors. Based on this, we build a complete physical characterization of the detector, including the measurement processes and a quantification of the fidelity, ideality, and backaction of the measurement. This framework is a diagnostic tool for the dynamics of QND detectors, allowing us to identify errors, and to improve their calibration and design. We illustrate this on a realistic Jaynes-Cummings simulation of a superconducting qubit readout. We characterize nondispersive errors, quantify the backaction introduced by the readout cavity, and calibrate the optimal measurement point.
Recent efforts have applied quantum tomography techniques to the calibration and characterization of complex quantum detectors using minimal assumptions. In this work, we provide detail and insight concerning the formalism, the experimental and theoretical challenges and the scope of these tomographical tools. Our focus is on the detection of photons with avalanche photodiodes and photon-number resolving detectors and our approach is to fully characterize the quantum operators describing these detectors with a minimal set of well-specified assumptions. The formalism is completely general and can be applied to a wide range of detectors.
Fast, precise, and quantum-non-demolition (QND) readout of superconducting qubits is a fundamental component of high-fidelity quantum sensing and computation. Conventional approaches typically operate in the dispersive regime, where the qubit-resonator coupling g is weak compared to the detuning Δ. While exhibiting good QND properties, the readout rate is limited to ∼g2N/Δ≪g, where N is the number of photons in the resonator. QND readout in the nondispersive regime, where the readout rate reaches its full potential ∼g, relies on parameter sweeps that may encounter resonances, leading to measurement-induced state transitions (MIST). In this work, we study a nondispersive readout protocol that replaces these sweeps by sudden quenches of the coupling constant, using a resonator that is preloaded with photons. We call this protocol bang-bang readout, and show that it realizes single-shot projective measurements. The fidelity and QNDness of the qubit post-measurement are remarkably high, with an error that decreases like 1/N. We show that the protocol can also be implemented without preloading the resonator by instead strongly driving the qubit, e.g., with a classical flux drive.