Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

aCryComm: attojoule cryogenic communication

Matteo Cherchi, Joonas Govenius, Juha Hassel, Visa Vesterinen, A. Kemppinen, Kirsi Tappura, J. Nissilä, Mark Bieler, Stephan Steinhauer, Val Zwiller, Stefan M. Koepfli, Maurizio Burla, Juerg Leuthold, Teemu V. Hakkarainen, Jukka Viheriälä, Mircea D. Guina, Mario Castaneda, Andreas Fognini, Eva De Leo, Claudia B. Hoessbacher

Published Mar 4, 2021• 0 citations
Publisher

Abstract

All envisaged practical implementations of cryogenic processors, including quantum computers and classical processors based on single flux quantum (SFQ) signals, require massive data transfer from and to classical high performance computers (HPCs). Cryogenic computing has recently become a very hot topic, including superconducting quantum computers (QCs), and classical processors based on single flux quantum (SFQ) signals. All envisaged practical implementations of cryogenic processors require massive data transfer from and to classical HPCs. The project aCryComm aims to develop building blocks for cryogenic photonics interconnects and eventually enable this challenging data transfer. The long-term goal is the development of an open-access platform to integrate classical optical interfaces based on low-loss silicon photonics, plasmonics, and nano light sources together with superconducting photonic and electronic devices, including SFQ-based co-processors for HPCs and for QCs.

DOI
10.1117/12.2578250

Related papers

Dual-Wavelength Operation of a VCSEL for Cryogenic Communication

Patrik Rajala, Behzad Namvar, Jukka Viheriälä +4 more

The development of quantum computing is progressing rapidly, but there are still important technological and scaling challenges to overcome to reach the expected potential. Generally speaking, one of the main challenges of scaling quantum computers arises from the delicacy of the quantum states. For example, the fact that superconducting-based quantum processors need to be connected to the ambient environment with high-speed (microwave regime) signals, brings in scaling limitations related to the ability of preserving very low operation temperatures [1]. An important step in overcoming this challenge would be replacing traditional microwave connectors between the outside environment and the mK-range processors with optical fibers. This would simultaneously increase the bandwidth available and drastically reduce the thermal load due to heating by minimizing the number of thermal bridges to outside environment [2]. Another intermediate solution is to interface quantum processes with a superconducting processor based on single flux quantum (SFQ) technology, operating at more relaxed cryogenic conditions (4 K instead of mK range) [3]. Such hybrid solution would also need to have bidirectional communication links to external environments, and an optical link exploiting efficient light sources operating at cryogenic temperatures appears to be instrumental to it.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations

Cryogenic integrated optical modulators for classical and quantum computing

Paolo Pintus, Anshuman Singh, Leonardo Ranzani +11 more

In recent years, standard CMOS microprocessors have approached their maximum power dissipation per unit area, effectively placing a limit on computational power. This highlights the urgent need to explore alternative technologies. One promising avenue is the use of superconductors, which demonstrate zero resistivity below a critical temperature. However, circuits based on superconductors necessitate the use of cryostats to maintain low temperatures, presenting challenges in data transfer with the room temperature environment. While coaxial cables are often employed for this purpose, they suffer from limited data transfer rates and contribute significantly to heat load. On the contrary, photonics integrated circuits (PICs) coupled with optical fibers present a viable solution. They enable scalable, cost-effective, and power-efficient optical interconnections capable of supporting high data transfer rates while minimizing heat transfer. In this presentation, We will discuss the latest advancements in cryogenic PICs, focusing on their application in interfacing with cryogenic computing systems such as single-flux-quantum logic circuits and superconducting qubits.

Photonic Computing: From Materials and Devices to Systems and Applications•Oct 2, 2024•0 citations

Cryogenic electronics for the read-out of quantum processors

Harald Homulle

Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.

•Apr 9, 2019•24 citations

Interfacing Superconducting Qubits With Cryogenic Logic: Readout

Caleb Howington, Alex Opremcak, R. McDermott +3 more

As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.

IEEE Transactions on Applied Superconductivity•Apr 2, 2019•36 citations

Interface Architectures for Low-Latency Cryogenic Control in Quantum-Classical Systems

Krishna Yaduvanshi

As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.

International Journal of Research Publication and Reviews•Oct 1, 2026•0 citations

Scaling up Superconducting Quantum Computers With Cryogenic RF-Photonics

Sanskriti Joshi, Sajjad Moazeni

Today's hundred-qubit quantum computers require a dramatic scale up to millions of qubits to become practical for solving real-world problems. Although a variety of qubit technologies have been demonstrated, scalability remains a major hurdle. Superconducting (SC) qubits are one of the most mature and promising technologies to overcome this challenge. However, these qubits reside in a millikelvin cryogenic dilution fridge, isolating them from thermal and electrical noise. They are controlled by a rack-full of external electronics through extremely complex wiring and cables. Although thousands of qubits can be fabricated on a single chip and cooled down to millikelvin temperatures, scaling up the control and readout electronics remains an elusive goal. This is mainly due to the limited available cooling power in cryogenic systems constraining the wiring capacity and cabling heat load management. In this article, we focus on scaling up the number of XY-control lines by using cryogenic RF-photonic links. This is one of the major roadblocks to build a thousand qubit superconducting QC. We will first review and study the challenges of state-of-the-art proposed approaches, including cryogenic CMOS and deep-cryogenic photonic methods, to scale up the control interface for SC qubit systems. We will discuss their limitations due to the active power dissipation and passive heat leakage in detail. By analytically modeling the noise sources and thermal budget limits, we will show that our solution can achieve a scale up to a thousand of qubits. Our proposed method can be seamlessly implemented using advanced silicon photonic processes, and the number of required optical fibers can be further reduced by using wavelength division multiplexing (WDM).

arXiv:2210.15756•Journal of Lightwave Technology•Sep 5, 2023•32 citations
All envisaged practical implementations of cryogenic processors, including quantum computers and classical processors based on single flux quantum (SFQ) signals, require massive data transfer from and to classical high performance computers (HPCs). Cryogenic computing has recently become a very hot topic, including superconducting quantum computers (QCs), and classical processors based on single flux quantum (SFQ) signals. All envisaged practical implementations of cryogenic processors require massive data transfer from and to classical HPCs. The project aCryComm aims to develop building blocks for cryogenic photonics interconnects and eventually enable this challenging data transfer. The long-term goal is the development of an open-access platform to integrate classical optical interfaces based on low-loss silicon photonics, plasmonics, and nano light sources together with superconducting photonic and electronic devices, including SFQ-based co-processors for HPCs and for QCs.
The development of quantum computing is progressing rapidly, but there are still important technological and scaling challenges to overcome to reach the expected potential. Generally speaking, one of the main challenges of scaling quantum computers arises from the delicacy of the quantum states. For example, the fact that superconducting-based quantum processors need to be connected to the ambient environment with high-speed (microwave regime) signals, brings in scaling limitations related to the ability of preserving very low operation temperatures [1]. An important step in overcoming this challenge would be replacing traditional microwave connectors between the outside environment and the mK-range processors with optical fibers. This would simultaneously increase the bandwidth available and drastically reduce the thermal load due to heating by minimizing the number of thermal bridges to outside environment [2]. Another intermediate solution is to interface quantum processes with a superconducting processor based on single flux quantum (SFQ) technology, operating at more relaxed cryogenic conditions (4 K instead of mK range) [3]. Such hybrid solution would also need to have bidirectional communication links to external environments, and an optical link exploiting efficient light sources operating at cryogenic temperatures appears to be instrumental to it.
In recent years, standard CMOS microprocessors have approached their maximum power dissipation per unit area, effectively placing a limit on computational power. This highlights the urgent need to explore alternative technologies. One promising avenue is the use of superconductors, which demonstrate zero resistivity below a critical temperature. However, circuits based on superconductors necessitate the use of cryostats to maintain low temperatures, presenting challenges in data transfer with the room temperature environment. While coaxial cables are often employed for this purpose, they suffer from limited data transfer rates and contribute significantly to heat load. On the contrary, photonics integrated circuits (PICs) coupled with optical fibers present a viable solution. They enable scalable, cost-effective, and power-efficient optical interconnections capable of supporting high data transfer rates while minimizing heat transfer. In this presentation, We will discuss the latest advancements in cryogenic PICs, focusing on their application in interfacing with cryogenic computing systems such as single-flux-quantum logic circuits and superconducting qubits.
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.
As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.
As superconducting and silicon-spin quantum processors scale from hundreds to thousands of physical qubits, the interconnect bottleneck between room-temperature classical electronics and mK cryogenic quantum processors poses a critical physical and architectural barrier. Low-latency control loops—essential for Quantum Error Correction (QED), fast reset protocols, and adaptive quantum algorithms—are strictly constrained by thermal load budgets, speed-of-light signal latency across thermal stages, and the bandwidth limits of coax lines. This paper presents a detailed architectural framework for next-generation quantum-classical interfaces. We investigate the transition from traditional, room-temperature arbitrary waveform generators (AWGs) connected via coaxial lines to co-integrated, cryo-CMOS, and single-flux-quantum (SFQ) digital-to-analog and digital signal processing control layers operating directly at the 4 K and 20 mK stages. We evaluate thermal transport, power dissipation, signal attenuation, and physical routing constraints, proposing a heterogeneous hybrid-control topology that satisfies latency budgets below 100 ns while remaining within the tight thermal limits of modern dilution refrigerators.
Today's hundred-qubit quantum computers require a dramatic scale up to millions of qubits to become practical for solving real-world problems. Although a variety of qubit technologies have been demonstrated, scalability remains a major hurdle. Superconducting (SC) qubits are one of the most mature and promising technologies to overcome this challenge. However, these qubits reside in a millikelvin cryogenic dilution fridge, isolating them from thermal and electrical noise. They are controlled by a rack-full of external electronics through extremely complex wiring and cables. Although thousands of qubits can be fabricated on a single chip and cooled down to millikelvin temperatures, scaling up the control and readout electronics remains an elusive goal. This is mainly due to the limited available cooling power in cryogenic systems constraining the wiring capacity and cabling heat load management. In this article, we focus on scaling up the number of XY-control lines by using cryogenic RF-photonic links. This is one of the major roadblocks to build a thousand qubit superconducting QC. We will first review and study the challenges of state-of-the-art proposed approaches, including cryogenic CMOS and deep-cryogenic photonic methods, to scale up the control interface for SC qubit systems. We will discuss their limitations due to the active power dissipation and passive heat leakage in detail. By analytically modeling the noise sources and thermal budget limits, we will show that our solution can achieve a scale up to a thousand of qubits. Our proposed method can be seamlessly implemented using advanced silicon photonic processes, and the number of required optical fibers can be further reduced by using wavelength division multiplexing (WDM).