Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical and Quantum Sensing and Precision Metrology

Chip-scale ultra-stable optical frequency references

Liron Stern

Published Mar 4, 2021• 0 citations
Publisher

Abstract

In this talk, we will present novel types of chip-scale optical frequency meteorological devices. Specifically, will demonstrate and discuss how Kerr-frequency combs interfaced with atomic vapour, micro-machined atomic diffractive elements and miniaturized ultra-stable optical cavities show a promising path towards ultra-stable and chip-scale optical frequency references.

DOI
10.1117/12.2588452

Related papers

Chip-scale atomic devices at NIST

Svenja A. Knappe, Peter D. D. Schwindt, Vladislav P. Gerginov +9 more

We provide an overview of our research on chip-scale atomic devices. By miniaturizing optical setups based on precision spectroscopy, we have developed small atomic sensors and atomic references such as atomic clocks, atomic magnetometers, and optical wavelength references. We have integrated microfabricated alkali vapor cells with small low-power lasers, micro-optics, and low-power microwave oscillators. As a result, we anticipate that atomic stability can be achieved with small size, low cost, battery-operated devices. Advances in fabrication methods and performance are presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 2, 2007•6 citations

On-chip quantum frequency combs for complex photon state generation (Conference Presentation)

Michael Kues, Stefania Sciara, Piotr Roztocki +13 more

A key challenge in today’s quantum science is the realization of large-scale complex non-classical systems to enable e.g. ultra-secure communications, quantum-enhanced measurements, and computations faster than classical approaches. Optical frequency combs represent a powerful approach towards this, since they provide a very high number of temporal and frequency modes which can result in large-scale quantum systems. Here, we discuss the recent progress on the realization of integrated quantum frequency combs and reveal how their use in combination with on-chip and fiber-optic telecommunications components can enable quantum state control with new functionalities, yielding unprecedented capability.

Laser Resonators, Microresonators, and Beam Control•Mar 9, 2020•0 citations

Laser offset stabilization with chip-scale atomic diffractive elements

Heleni Krelman, Ori Nefesh, Kfir Levi +4 more

Offset stabilization of a laser's frequency relative to an atomic transition is crucial for many quantum technologies, but equipment for it is often bulky or dependent on magnetic fields, limiting integration into compact systems. Exploiting the interference properties of atoms geometrically confined within diffractive optical elements, this study presents a chip-scale, hybrid atomic-photonic approach that enables multiple stabilization points with submegahertz precision over a bandwidth of tens of gigahertz. This miniaturization, with no need for magnetic fields, points to the next generation of compact laser-stabilization devices for quantum applications and precision spectroscopy.

arXiv:2405.11527•Physical Review Applied•Mar 6, 2025•1 citation

An active optical frequency reference using a pulsed superradiant laser

Juan Muniz Silva, Julia Cline, James K. Thompson +1 more

We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•4 citations

Micro- and Nano-Photonics for Chip-Scale Solid-State and Atomic Cavity QED

Oskar J. Painter

In this talk I will describe our progress in developing integrated atom-photon chips and monolithic semiconductor quantum dot-microcavity systems for chip-scale cavity QED. Article not available.

Quantum Electronics and Laser Science Conference•May 6, 2007•0 citations

Direct Kerr-frequency-comb atomic stabilization

Liron Stern, Jordan R. Stone, Songbai Kang +4 more

We experimentally demonstrate direct Kerr-microresonator frequency-comb atomic spectroscopy, utilizing a cascaded two-photon 1529-nm transition in a rubidium micro-machined vapor cell. The demonstration is a path for compact atomic frequency references and multiphoton comb-atom interactions.

Conference on Lasers and Electro-Optics•Jan 1, 2018•5 citations
In this talk, we will present novel types of chip-scale optical frequency meteorological devices. Specifically, will demonstrate and discuss how Kerr-frequency combs interfaced with atomic vapour, micro-machined atomic diffractive elements and miniaturized ultra-stable optical cavities show a promising path towards ultra-stable and chip-scale optical frequency references.
We provide an overview of our research on chip-scale atomic devices. By miniaturizing optical setups based on precision spectroscopy, we have developed small atomic sensors and atomic references such as atomic clocks, atomic magnetometers, and optical wavelength references. We have integrated microfabricated alkali vapor cells with small low-power lasers, micro-optics, and low-power microwave oscillators. As a result, we anticipate that atomic stability can be achieved with small size, low cost, battery-operated devices. Advances in fabrication methods and performance are presented.
A key challenge in today’s quantum science is the realization of large-scale complex non-classical systems to enable e.g. ultra-secure communications, quantum-enhanced measurements, and computations faster than classical approaches. Optical frequency combs represent a powerful approach towards this, since they provide a very high number of temporal and frequency modes which can result in large-scale quantum systems. Here, we discuss the recent progress on the realization of integrated quantum frequency combs and reveal how their use in combination with on-chip and fiber-optic telecommunications components can enable quantum state control with new functionalities, yielding unprecedented capability.
Offset stabilization of a laser's frequency relative to an atomic transition is crucial for many quantum technologies, but equipment for it is often bulky or dependent on magnetic fields, limiting integration into compact systems. Exploiting the interference properties of atoms geometrically confined within diffractive optical elements, this study presents a chip-scale, hybrid atomic-photonic approach that enables multiple stabilization points with submegahertz precision over a bandwidth of tens of gigahertz. This miniaturization, with no need for magnetic fields, points to the next generation of compact laser-stabilization devices for quantum applications and precision spectroscopy.
We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.