Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

WORLD SCIENTIFIC eBooks

OPTICAL CLOCKS AND FREQUENCY METROLOGY FOR SPACE

Hugh A. Klein

Published May 1, 2009• 0 citations
Publisher

Abstract

Optical frequency standards and femtosecond comb measurement capabilities now rival and in some cases exceed those of microwave devices, with further improvements anticipated. Opportunities are emerging for the application of highly stable and accurate optical frequency devices to fundamental physics space science activities, and the European Space Agency (ESA) has recently commissioned studies on different aspects of optical clocks in space. This paper highlights some examples, including the difficulty of comparing very accurate terrestrial clocks at different locations due to fluctuations of the geoid; by locating a primary frequency standard in space, one could avoid geoid-related gravitational redshifts.

DOI
10.1142/9789814261210_0056

Related papers

The space optical clocks project: Development of high-performance transportable and breadboard optical clocks and advanced subsystems

Stephan Schiller, Axel Görlitz, Alexander Yu. Nevsky +28 more

The use of ultra-precise optical clocks in space (“master clocks”) will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the “Space Optical Clocks” (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011–2015) aims at two “engineering confidence“, accurate transportable lattice optical clock demonstrators having relative frequency instability below 1×10−15at 1 s integration time and relative inaccuracy below 5×10−17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In order to achieve the goals, SOC2 will develop the necessary laser systems - adapted in terms of power, linewidth, frequency stability, long-term reliability, and accuracy. Novel solutions with reduced space, power and mass requirements will be implemented. Some of the laser systems will be developed towards particularly high compactness and robustness levels. Also, the project will validate crucial laser components in relevant environments. In this paper we present the project and the results achieved during the first year.

arXiv:1206.3765•European Frequency and Time Forum•Apr 1, 2012•48 citations

TRAPPED-ION OPTICAL FREQUENCY STANDARDS

Piet O. Schmidt, Ian D. Leroux

Optical frequency standards based on trapped atoms are the most accurate measurement devices we have available. They not only serve as superior time keepers but also lend themselves to a wide variety of applications ranging from tests of fundamental physics to the measurement of heights in relativistic geodesy. This chapter provides an introduction to the basics of optical frequency standards and clocks based on trapped ions and their applications.

Advanced textbooks in physics•Apr 21, 2016•5 citations

Frequency metrology and clocks

Helen S. Margolis

Transitions between discrete energy levels in well-isolated atomic systems are highly reproducible and therefore make ideal references for highly accurate frequency standards or clocks. In particular, a single laser-cooled ion confined in a radiofrequency ion trap closely approximates the spectroscopic ideal of a particle at rest in a perturbation-free environment. Narrow optical transitions in such systems are therefore very promising for the realization of optical clocks with accuracy around 2 orders of magnitude higher than current microwave primary standards. In this paper the fundamental aspects, current performance and applications of trapped ion optical clocks are reviewed and the potential for future improvements is considered.

Journal of Physics B Atomic Molecular and Optical Physics•Jul 16, 2009•53 citations

Space-borne frequency comb metrology

M. Lezius, Tobias Wilken, Christian Deutsch +18 more

Precision time references in space are of major importance to satellite-based fundamental science, global satellite navigation, earth observation, and satellite formation flying. Here we report on the operation of a compact, rugged, and automated optical frequency comb setup on a sounding rocket in space under microgravity. The experiment compared two clocks, one based on the optical D2 transition in Rb, and another on hyperfine splitting in Cs. This represents the first frequency comb based optical clock operation in space, which is an important milestone for future satellite-based precision metrology. Based on the approach demonstrated here, future space-based precision metrology can be improved by orders of magnitude when referencing to state-of-the-art optical clock transitions.

Optica•Nov 17, 2016•276 citations

A high-performance bosonic optical lattice clock

Stefano Origlia

Optical clocks are being developed worldwide and are at the forefront of frequency metrology. Today they outperform microwave clocks instability and inaccuracy by two orders of magnitude, raising discussion about the redefinition of the SI second. Their outstanding performances are paving the way to applications in different fields apart from metrology. Optical clocks can be used for geodetic measurements, such as chronometric levelling, and fundamental physics experiments. These applications require transportable, and even space-born optical clocks that are in development. Space optical clocks will serve as a high accurate references for intercontinental clock comparisons, and will also provide a unique test bench for fundamental physics theories, such as Einstein’s prediction of time dilation and equivalence principle. This work presents the development and characterization of a transportable strontium optical lattice clock, realised in the framework of the ESA I-SOC (Space Optical Clock on the ISS) mission. The aim of the project is to investigate new technologies and techniques, in order to develop a robust apparatus as demonstrator for space applications. Special effort has been made to reduce the size and weight of the clock, so as to meet the stringent requirements of a space mission. The system reported here is one of the most compact optical clock to date, with a total volume of only 1 m3, excluding electronics. The clock is operated with the strontium bosonic isotope 88Sr: this is preferable to the fermionic counterpart 87Sr, commonly used in optical lattice clocks, if simplicity and reliability are required. However, in terms of accuracy, bosonic clocks present some disadvantages compared with the fermionic ones, which have significantly slowed down their development for metrological applications. We characterised the relevant operating parameters and their effect on the clock accuracy and instability. Exploiting a clock laser offering an outstanding stability, we were able to demonstrate a clock fractional instability of 3×10-18 , and an inaccuracy of 2×10-17: both values represent a factor of 30 improvement compared with previous works on bosonic optical clocks. These results suggest that, in the near future, bosonic clocks may become competitive to their fermionic counterparts. This is of interest for applications such as time scale realization, transportable clocks, or for test of fundamental physics. As an example, we measured the 88Sr-87Sr isotope shift, with an uncertainty of 12 mHz.

•Jan 1, 2018•1 citation

Progress in optical space-based clocks: Status, perspectives and applications

Anton V. Kovalev, Vadim M. Polyakov, Andrey A. Mak

We discuss the recent advantages in creation of optical space-based frequency standards. We observe perspective in the field as well as status of making the laser frequency standard of radio frequency range in ITMO University and recent experiments on launching optical frequency combs in space. The most important applications of space-based optical clocks are overviewed.

International Conference Laser Optics (ICLO)•Jun 1, 2016•2 citations
Optical frequency standards and femtosecond comb measurement capabilities now rival and in some cases exceed those of microwave devices, with further improvements anticipated. Opportunities are emerging for the application of highly stable and accurate optical frequency devices to fundamental physics space science activities, and the European Space Agency (ESA) has recently commissioned studies on different aspects of optical clocks in space. This paper highlights some examples, including the difficulty of comparing very accurate terrestrial clocks at different locations due to fluctuations of the geoid; by locating a primary frequency standard in space, one could avoid geoid-related gravitational redshifts.
The use of ultra-precise optical clocks in space (“master clocks”) will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the “Space Optical Clocks” (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011–2015) aims at two “engineering confidence“, accurate transportable lattice optical clock demonstrators having relative frequency instability below 1×10−15at 1 s integration time and relative inaccuracy below 5×10−17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In order to achieve the goals, SOC2 will develop the necessary laser systems - adapted in terms of power, linewidth, frequency stability, long-term reliability, and accuracy. Novel solutions with reduced space, power and mass requirements will be implemented. Some of the laser systems will be developed towards particularly high compactness and robustness levels. Also, the project will validate crucial laser components in relevant environments. In this paper we present the project and the results achieved during the first year.
Transitions between discrete energy levels in well-isolated atomic systems are highly reproducible and therefore make ideal references for highly accurate frequency standards or clocks. In particular, a single laser-cooled ion confined in a radiofrequency ion trap closely approximates the spectroscopic ideal of a particle at rest in a perturbation-free environment. Narrow optical transitions in such systems are therefore very promising for the realization of optical clocks with accuracy around 2 orders of magnitude higher than current microwave primary standards. In this paper the fundamental aspects, current performance and applications of trapped ion optical clocks are reviewed and the potential for future improvements is considered.
Precision time references in space are of major importance to satellite-based fundamental science, global satellite navigation, earth observation, and satellite formation flying. Here we report on the operation of a compact, rugged, and automated optical frequency comb setup on a sounding rocket in space under microgravity. The experiment compared two clocks, one based on the optical D2 transition in Rb, and another on hyperfine splitting in Cs. This represents the first frequency comb based optical clock operation in space, which is an important milestone for future satellite-based precision metrology. Based on the approach demonstrated here, future space-based precision metrology can be improved by orders of magnitude when referencing to state-of-the-art optical clock transitions.
Optical clocks are being developed worldwide and are at the forefront of frequency metrology. Today they outperform microwave clocks instability and inaccuracy by two orders of magnitude, raising discussion about the redefinition of the SI second. Their outstanding performances are paving the way to applications in different fields apart from metrology. Optical clocks can be used for geodetic measurements, such as chronometric levelling, and fundamental physics experiments. These applications require transportable, and even space-born optical clocks that are in development. Space optical clocks will serve as a high accurate references for intercontinental clock comparisons, and will also provide a unique test bench for fundamental physics theories, such as Einstein’s prediction of time dilation and equivalence principle. This work presents the development and characterization of a transportable strontium optical lattice clock, realised in the framework of the ESA I-SOC (Space Optical Clock on the ISS) mission. The aim of the project is to investigate new technologies and techniques, in order to develop a robust apparatus as demonstrator for space applications. Special effort has been made to reduce the size and weight of the clock, so as to meet the stringent requirements of a space mission. The system reported here is one of the most compact optical clock to date, with a total volume of only 1 m3, excluding electronics. The clock is operated with the strontium bosonic isotope 88Sr: this is preferable to the fermionic counterpart 87Sr, commonly used in optical lattice clocks, if simplicity and reliability are required. However, in terms of accuracy, bosonic clocks present some disadvantages compared with the fermionic ones, which have significantly slowed down their development for metrological applications. We characterised the relevant operating parameters and their effect on the clock accuracy and instability. Exploiting a clock laser offering an outstanding stability, we were able to demonstrate a clock fractional instability of 3×10-18 , and an inaccuracy of 2×10-17: both values represent a factor of 30 improvement compared with previous works on bosonic optical clocks. These results suggest that, in the near future, bosonic clocks may become competitive to their fermionic counterparts. This is of interest for applications such as time scale realization, transportable clocks, or for test of fundamental physics. As an example, we measured the 88Sr-87Sr isotope shift, with an uncertainty of 12 mHz.