Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Implementation of continuous multi-qubit gate families on superconducting quantum processors

Alexander D. Hill, Nicolas Didier

Published Mar 15, 2021• 0 citations
OpenAlex

Related papers

Native multi-qubit gates on a single-junction unimon circuit

Sasu Tuohino, Mikko Möttönen, Matti Silveri

Quantum processors with native multi-qubit gates may offer very efficient implementations of near-term quantum algorithms on noisy hardware. Here, we introduce the multiunimon, a superconducting multimode circuit that encodes multiple qubits and enables native multi-qubit gates in a device consisting of a single Josephson junction embedded in a coplanar waveguide structure. Closely related to the unimon qubit, it inherits properties such as high anharmonicity, full protection against low-frequency charge noise, and partial protection against flux noise. By designing such a three-qubit device with Josephson-to-inductive energy ratio above unity and using a leakage-aware encoding scheme for the computational states, we simulate all twelve different controlled-controlled-NOT gates with a mean fidelity of 99.5% with simple sine-squared pulses of comparable length to single-qubit gates. The performance is limited by incoherent errors dominated by dielectric loss. With improvements in noise protection, design, and pulse shaping, the simulations suggest that fidelities approaching 99.99% are within reach. Our results demonstrate the potential of the multiunimon as a highly connected multi-qubit unit for larger superconducting quantum processors.

quant-pharXiv:2608.14357•Aug 17, 2026•1 citation

Simulation of gate-based quantum computers with superconducting qubits

Dennis Willsch, Madita Nocon, Fengping Jin +2 more

•Jan 1, 2017•0 citations

Native CCZ Gate with Fluxonium Qubits and a Microwave-Driven Coupler

Grigoriy S. Mazhorin, Tatyana A. Chudakova, Alena S. Kazmina +12 more

Native multi-qubit gates could reduce the overhead associated with decompositions into single- and two-qubit operations, but whether they can simultaneously provide high fidelity, simple control and robustness against parasitic interactions in scalable architectures remains unclear. Here we experimentally realize a 65-ns native controlled-controlled-phase operation, locally equivalent to the Toffoli gate, with a fidelity of 99.39(5)% in a three-qubit processor unit based on fluxonium qubits coupled via a microwave-driven transmon coupler. The implemented operation would require CZ fidelities of approximately 99.94% if realized through a conventional decomposition. The gate is implemented with a single control pulse, that relies on a simple calibration procedure yielding coherence-limited performance. This processor unit naturally extends to scalable two-dimensional layouts with low parasitic interactions. Altogether, these results establish native multi-qubit gates as a viable hardware-efficient primitive for scalable superconducting quantum processors.

quant-pharXiv:2607.27094•Jul 30, 2026•3 citations

Realizing quantum gates and algorithms with three superconducting qubits

Matthias Baur

•Jan 1, 2012•1 citation

Engineering cross resonance interaction in multi-modal quantum circuits

Sumeru Hazra, Kishor V. Salunkhe, Anirban Bhattacharjee +5 more

The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.

arXiv:1912.10953•Applied Physics Letters•Apr 13, 2020•12 citations

Quantum gates for superconducting qubits

Chad T. Rigetti

•Jan 1, 2009•13 citations
Quantum processors with native multi-qubit gates may offer very efficient implementations of near-term quantum algorithms on noisy hardware. Here, we introduce the multiunimon, a superconducting multimode circuit that encodes multiple qubits and enables native multi-qubit gates in a device consisting of a single Josephson junction embedded in a coplanar waveguide structure. Closely related to the unimon qubit, it inherits properties such as high anharmonicity, full protection against low-frequency charge noise, and partial protection against flux noise. By designing such a three-qubit device with Josephson-to-inductive energy ratio above unity and using a leakage-aware encoding scheme for the computational states, we simulate all twelve different controlled-controlled-NOT gates with a mean fidelity of 99.5% with simple sine-squared pulses of comparable length to single-qubit gates. The performance is limited by incoherent errors dominated by dielectric loss. With improvements in noise protection, design, and pulse shaping, the simulations suggest that fidelities approaching 99.99% are within reach. Our results demonstrate the potential of the multiunimon as a highly connected multi-qubit unit for larger superconducting quantum processors.
Native multi-qubit gates could reduce the overhead associated with decompositions into single- and two-qubit operations, but whether they can simultaneously provide high fidelity, simple control and robustness against parasitic interactions in scalable architectures remains unclear. Here we experimentally realize a 65-ns native controlled-controlled-phase operation, locally equivalent to the Toffoli gate, with a fidelity of 99.39(5)% in a three-qubit processor unit based on fluxonium qubits coupled via a microwave-driven transmon coupler. The implemented operation would require CZ fidelities of approximately 99.94% if realized through a conventional decomposition. The gate is implemented with a single control pulse, that relies on a simple calibration procedure yielding coherence-limited performance. This processor unit naturally extends to scalable two-dimensional layouts with low parasitic interactions. Altogether, these results establish native multi-qubit gates as a viable hardware-efficient primitive for scalable superconducting quantum processors.
The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.