Atomic Clock Ensemble in Space (ACES) is a mission in fundamental physics that will operate a new generation of atomic clocks in the microgravity environment of the International Space Station. Fractional frequency stability and accuracy of a few parts in 10 16 will be achieved. The on-board time base, distributed on the Earth via a microwave link, will be used to perform space-to-ground as well as ground-to-ground comparisons of atomic frequency standards. Based on these comparisons, ACES will perform fundamental physics tests (Einstein's theories of special and general relativity, the search for drift of fundamental constants, the Standard Model extension and tests of string theories) and develop applications in time and frequency metrology, time scales, geodesy, global positioning and navigation. After an overview of the mission concept and its scientific objectives, the present status of ACES instruments and subsystems will be discussed.
Atomic Clock Ensemble in Space (ACES) is a mission in fundamental physics that will operate a new generation of atomic clocks in the microgravity environment of the International Space Station. Fractional frequency stability and accuracy of a few parts in 10 16 will be achieved. The on-board time base, distributed on the Earth via a microwave link, will be used to perform space-to-ground as well as ground-to-ground comparisons of atomic frequency standards. Based on these comparisons, ACES will perform fundamental physics tests (Einstein's theories of special and general relativity, the search for drift of fundamental constants, the Standard Model extension and tests of string theories) and develop applications in time and frequency metrology, time scales, geodesy, global positioning and navigation. After an overview of the mission concept and its scientific objectives, the present status of ACES instruments and subsystems will be discussed.
We describe a space cold atom clock prototype and its operation on board an aircraft. We have recorded the atomic resonance in zero gravity during parabolic flights. This experiment must be considered as an essential step toward the construction of a space clock using cold atoms. In a microgravity environment, a cold atomic clock would outperform all ground-based clocks. By the year 2002, we plan to operate a cold atom clock on board the international space station. This mission is called Atomic Clock Ensemble in Space (ACES). We have also performed a preliminary accuracy evaluation of the prototype. The interrogation of the cold atoms is performed inside a TE/sub 013/ cavity. On earth, the phase variations of the field induce a relative frequency shift of about 1/spl times/10/sup -13/. Although the frequency shift is expected to strongly decrease in microgravity, this cavity does not seem suitable for a 1/spl times/10/sup -16/ frequency uncertainty.
The Human Spaceflight, Microgravity, and Exploration (HME) Directorate of the European Space Agency is strongly involved in fundamental physics research. One of the major activities in this field is represented by the ACES (Atomic Clock Ensemble in Space) mission. ACES will demonstrate the high performances of a new generation of atomic clocks in the microgravity environment of the International Space Station (ISS). Following ACES, a vigorous research program has been recently approved to develop a second generation of atomic quantum sensors for space applications: atomic clocks in the optical domain, aiming at fractional frequency stability and accuracy in the low 10-18 regime; inertial sensors based on matter-wave interferometry for the detection of tiny accelerations and rotations; a facility to study degenerate Bose gases in space. Tests of quantum physics on large distance scales represent another important issue addressed in the HME program. A quantum communication optical terminal has been proposed to perform a test of Bell's inequalities on pairs of entangled photons emitted by a source located on the ISS and detected by two ground stations. In this paper, present activities and future plans will be described and discussed.
The use of ultra-precise optical clocks in space (“master clocks”) will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the “Space Optical Clocks” (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011–2015) aims at two “engineering confidence“, accurate transportable lattice optical clock demonstrators having relative frequency instability below 1×10−15at 1 s integration time and relative inaccuracy below 5×10−17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In order to achieve the goals, SOC2 will develop the necessary laser systems - adapted in terms of power, linewidth, frequency stability, long-term reliability, and accuracy. Novel solutions with reduced space, power and mass requirements will be implemented. Some of the laser systems will be developed towards particularly high compactness and robustness levels. Also, the project will validate crucial laser components in relevant environments. In this paper we present the project and the results achieved during the first year.
Abstract Atomic clocks, which lock the frequency of an oscillator to the extremely stable quantized energy levels of atoms, are essential for navigation applications such as deep space exploration1 and the Global Positioning System (GPS)2 and as scientific tools for addressing questions in fundamental physics3,4,5,6. Atomic clocks that can be launched into space are an enabling technology for GPS, but to date have not been applied to deep space navigation and have seen only limited application to scientific questions due to performance constraints imposed by the rigors of space launch and operation7. The invention of methods to electromagnetically trap and cool ions has revolutionized atomic clock performance8,9,10,11,12,13. Terrestrial trapped ion clocks have achieved orders of magnitude improvements in performance over their predecessors and have become a key component in national metrology laboratories13. However, transporting this new technology into space has remained elusive. Here we show the results from the first-ever trapped ion atomic clock to operate in space. Launched in 2019, NASA’s Deep Space Atomic Clock (DSAC) has operated for more than 12 months, demonstrating a short-term fractional frequency stability of between 1 and 2 x 10-13 at 1 second of averaging time (measured on the ground), a long-term stability of 3 x 10-15 at 23 days, and an estimated drift of 3.0(0.7) x 10-16 per day. Each of these exceeds current space clock performance by as much as an order of magnitude14,15,16. We found the DSAC clock to be particularly amenable to the space environment, having low sensitivities to variations in radiation, temperature, and magnetic fields, and we were able to characterize these in detail. This level of space clock performance will enable new types of space navigation. In particular, the DSAC mission has demonstrated a process called one-way navigation whereby signal delay times are measured in-situ making near-real-time deep space probe navigation possible17.
This paper describes progress toward the development of a Primary Atomic Reference Clock in Space (PARCS) and reviews the scientific and technical objectives of the PARCS mission. PARCS is a collaborative effort involving the National Institute of Standards and Technology (NIST), the University of Colorado, the Jet Propulsion Laboratory (JPL), the Harvard Smithsonian Center for Astrophysics (SAO) and the Politecnico di Torino. Space systems for this experiment include a laser-cooled cesium atomic clock and a GPS frequency-comparison and orbit determination system, along with a hydrogen maser that serves as both a local oscillator for the cesium clock and a reference against which certain tests of gravitational theory can be made. In the microgravity environment of the International Space Station (ISS), cesium atoms can be launched more slowly through the clock's microwave cavity, thus significantly reducing a number of troubling effects (including several critical systematic effects), so clock performance can be substantially improved beyond that achieved on earth.
Ultra-precise optical clocks in space will allow new studies in fundamental physics and astronomy. Within an European Space Agency (ESA) program, the “Space Optical Clocks” (SOC) project aims to install and to operate an optical lattice clock on the International Space Station (ISS) towards the end of this decade. It would be a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Within the EU-FP7-SPACE-2010-1 project No. 263500, during the years 2011–2015 a compact, a modular and robust strontium lattice optical clock demonstrator has been developed. The goal performance is a fractional frequency instability below 1 × 10 − 15 τ − 1 / 2 and a fractional inaccuracy below 5 × 10 − 17 . Here we describe the current status of the apparatus' development, including the laser subsystems. The robust preparation of cold 88 Sr atoms in a second-stage magneto-optical trap (MOT) is achieved.