Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Characterization of superconducting transport in CMOS PtSi transistors for scalable qubits

Tom Doekle Vethaak, Laurie E. Calvet, John P. Snyder, F. Lefloch

Published Mar 17, 2021• 0 citations
OpenAlex

Related papers

Silicide-based Josephson field effect transistors for superconducting qubits

Tom Doekle Vethaak

Circuits supraconducteurs en technologie silicium L’évolution de la fabrication et l’exploitation des ordinateurs quantiques est essentielle pour dépasser l’ère NISQ. Jusqu’à présent, les qubits transmon supraconducteurs basés sur des jonctions tunnel Josephson en aluminium ont donné les résultats les plus avancés, bien que cette technologie soit difficile à mettre en oeuvre dans des installations à grande échelle.Un autre qubit "gatemon" est apparu récemment, qui utilise des dispositifs hybrides supraconducteurs/semiconducteurs (S/Sm) comme jonctions Josephson accordées par un contrôle électrostatique. Cependant, les implémentations actuelles de ces dispositifs utilisent des nanofils, dont la fabrication à grande échelle n’a pas encore atteint sa maturité. Une conception évolutive de gatemon pourrait être réalisée avec des transistors à effet de champ Josephson CMOS comme lien faible accordable, où un dispositif idéal est constitué de réservoirs supraconducteurs qui contactent un canal court par des interfaces à haute transparence. Une transparence élevée, ou une faible résistance de contact,est obtenue dans l’industrie de la microélectronique avec des siliciures, dont certains s’avèrent être supraconducteurs. La première partie du travail expérimental de cette thèse couvre les études de matériaux sur deux de ces matériaux : V3Si et PtSi, qui sont intéressants pour leur Tc élevé, et leur intégration mature. La deuxième partie couvre des résultats expérimentaux sur des transistors PtSi de longueur de grille 50nm, où la transparence des interfaces S/Sm est modulée par la tension de grille. A basse tension,le transport ne montre aucune conductance à basse énergie, et des pics de cohérence bien définis au niveau du gap supraconducteur. La hauteur de la barrière à l’interfaceS/Sm est réduite en augmentant la tension de grille, jusqu’à ce qu’un pic de conductance apparaisse autour d’une tension de drain nulle, ce qui révèle l’apparition d’un courant d’Andreev. La modulation du courant d’Andreev par une grille dans un transistor à base de silicium, représente une étape vers des ordinateurs quantiques supraconducteurs entièrement intégrés en CMOS.

arXiv:2209.02721•Jul 7, 2021•6 citations

CMOS Compatible Josephson Junctions for Superconducting Qubit Applications

Tsvetan Ivanov, Anton Potočnik, Danny Wan +10 more

International Conference on Solid State Devices and Materials (SSDM)•Sep 29, 2020•0 citations

A Quantum Transistor with Superconducting Qubits

Niels Jakob Søe Loft, Lasse Bjørn Kristensen, Christian Kraglund Andersen +1 more

Bulletin of the American Physical Society•Mar 6, 2018•0 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations

Towards a scalable superconducting qubit architecture

Matthias Steffen

Bulletin of the American Physical Society•Feb 28, 2012•2 citations

Cryogenic CMOS Integrated Circuits for Scalable Readout of Silicon Quantum Computers

Andrea Ruffino

Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.

•Jan 1, 2021•0 citations
Circuits supraconducteurs en technologie silicium L’évolution de la fabrication et l’exploitation des ordinateurs quantiques est essentielle pour dépasser l’ère NISQ. Jusqu’à présent, les qubits transmon supraconducteurs basés sur des jonctions tunnel Josephson en aluminium ont donné les résultats les plus avancés, bien que cette technologie soit difficile à mettre en oeuvre dans des installations à grande échelle.Un autre qubit "gatemon" est apparu récemment, qui utilise des dispositifs hybrides supraconducteurs/semiconducteurs (S/Sm) comme jonctions Josephson accordées par un contrôle électrostatique. Cependant, les implémentations actuelles de ces dispositifs utilisent des nanofils, dont la fabrication à grande échelle n’a pas encore atteint sa maturité. Une conception évolutive de gatemon pourrait être réalisée avec des transistors à effet de champ Josephson CMOS comme lien faible accordable, où un dispositif idéal est constitué de réservoirs supraconducteurs qui contactent un canal court par des interfaces à haute transparence. Une transparence élevée, ou une faible résistance de contact,est obtenue dans l’industrie de la microélectronique avec des siliciures, dont certains s’avèrent être supraconducteurs. La première partie du travail expérimental de cette thèse couvre les études de matériaux sur deux de ces matériaux : V3Si et PtSi, qui sont intéressants pour leur Tc élevé, et leur intégration mature. La deuxième partie couvre des résultats expérimentaux sur des transistors PtSi de longueur de grille 50nm, où la transparence des interfaces S/Sm est modulée par la tension de grille. A basse tension,le transport ne montre aucune conductance à basse énergie, et des pics de cohérence bien définis au niveau du gap supraconducteur. La hauteur de la barrière à l’interfaceS/Sm est réduite en augmentant la tension de grille, jusqu’à ce qu’un pic de conductance apparaisse autour d’une tension de drain nulle, ce qui révèle l’apparition d’un courant d’Andreev. La modulation du courant d’Andreev par une grille dans un transistor à base de silicium, représente une étape vers des ordinateurs quantiques supraconducteurs entièrement intégrés en CMOS.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.