Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Performance of an All-NbN Quasi-optical SIS Mixer for the Terahertz Band

Y. Uzawa, Z. Wang, Akira Kawakami, S. Miki

Published Dec 1, 2001• 0 citations
OpenAlex

Related papers

Study on quasi-optical SIS mixers with NbN/AlN/NbN tunnel junctions in the submillimeter-wave band

佳徳 鵜澤

•Jan 1, 2000•0 citations

Performance of quasi-optical SIS mixer with NbN/AlN/NbN tunnel junctions and NbN tuning circuit at 760 GHz

Yoshinori Uzawa, Zhen Wang, Akira Kawakami

Applied Superconductivity•Jul 1, 1998•12 citations

NbN/AIN/NbN Tunnel Junctions Applied as Terahertz SIS Mixers

Zhen Wang, Yoshinori Uzawa, Akira Kawakami

IEICE Transactions on Electronics•Oct 25, 1997•3 citations

CS-7-1 Terahertz-band SIS Mixers with NbN Tunnel Junctions

Zhen Wang, Yoshinori Uzawa, Masanori Takeda +1 more

Proceedings of the IEICE General Conference•Mar 7, 2005•0 citations

Performance of SIS mixers at 205 Ghz employing submicron Nb and NbN tunnel junctions

Hamid Javadi

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Dec 1, 1990•4 citations

Performance of all-NbN quasi-optical SIS mixers for the terahertz band

Yoshinori Uzawa, Akira Kawakami, Shigehito Miki +1 more

We have designed, fabricated, and tested terahertz superconductor-insulator-superconductor (SIS) mixers having a self-compensated NbN/AlN/NbN tunnel junction and an epitaxially grown NbN/MgO/NbN microstripline. The junction as a distributed element was 0.8-/spl mu/m wide and 2.4-/spl mu/m long, and its current density was 50 kA/cm/sup 2/. The microstripline consisted of a 200-nm-thick NbN ground plane, a 180-nm-thick MgO insulator, and a 350-nm-thick NbN wiring layer. An investigation of the mixer in our receiver configuration showed flat noise characteristics from 870 to 960 GHz. The lowest receiver noise temperature of about 550 K was obtained at 909 GHz, including a 9-/spl mu/m-thick Mylar beam splitter loss and other optical losses. These characteristics suggest that SIS mixers with self-compensated NbN/AlN/NbN junctions and NbN/MgO/NbN microstriplines are appropriate for used in wideband and low-noise operations at terahertz frequencies.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•21 citations
We have designed, fabricated, and tested terahertz superconductor-insulator-superconductor (SIS) mixers having a self-compensated NbN/AlN/NbN tunnel junction and an epitaxially grown NbN/MgO/NbN microstripline. The junction as a distributed element was 0.8-/spl mu/m wide and 2.4-/spl mu/m long, and its current density was 50 kA/cm/sup 2/. The microstripline consisted of a 200-nm-thick NbN ground plane, a 180-nm-thick MgO insulator, and a 350-nm-thick NbN wiring layer. An investigation of the mixer in our receiver configuration showed flat noise characteristics from 870 to 960 GHz. The lowest receiver noise temperature of about 550 K was obtained at 909 GHz, including a 9-/spl mu/m-thick Mylar beam splitter loss and other optical losses. These characteristics suggest that SIS mixers with self-compensated NbN/AlN/NbN junctions and NbN/MgO/NbN microstriplines are appropriate for used in wideband and low-noise operations at terahertz frequencies.