Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser Model in the High-Q Limit

Z. Ficek, Mohamed Ridza Wahiddin

Published Apr 19, 2016• 0 citations
Publisher

Abstract

In this chapter, we turn our considerations to the simplest model of a laser that includes all the essential features of any practical laser. The one-photon losses (due to coupling to the environment), linear gain (due to inverted atoms) and saturation (due to nonlinear loss), that are experienced by a single-mode (laser) cavity are all included in the calculations and their role in the laser properties is fully explored.We point out that all lasersmust have these three elements to operate as a laser. If there is only a linear gain, then of course there can be no output, since an output causes a loss. With both gain and loss, but not saturation, the laser intensity is either near zero (well below threshold), or else it rises infinitely (well above threshold). Neither case is very useful as a model of a real laser, which has a finite output above threshold. This is why a saturation mechanism is needed, such as an intensity dependent nonlinear loss. This simple model used here is then obtainable in the limit of a high-Q laser operating not too far above threshold.

DOI
10.1201/b16875-24

Related papers

Quantum Theory of Laser

In most cases, laser operation is well described by the semiclassical rate equations that were discussed in Chapters 2 and 8, including pump dependence, frequency pulling and saturation as well as threshold behavior. It is because the laser field is intense, composed of many photons in a mode. So, for laser engineering, we do not need quantum optical theories. However, there are some important issues demanding a full-quantum-mechanical description of the field. One example is the laser linewidth and another is the photon statistics. In this chapter, we will focus on the laser linewidth, namely, how coherent the laser light is by employing a full quantum description of the field. Laser threshold is defined as a condition for anomalous photon number distribution. We will then show that the photon statistics of the laser light approaches that of a coherent state far above the laser threshold. In addition, the laser threshold condition itself is examined and extended to a general form.

WORLD SCIENTIFIC eBooks•Feb 1, 2023•0 citations

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Quantum theory of a one-dimensional laser with output coupling: Linear approximation

J.C. Penaforte, B. Baseia

A simple model of a one-dimensional optical cavity having output coupling is used to develop a fully quantized linear laser theory. The present model and procedure, which work directly within the continuous spectrum, allow us to find a simple treatment that leads to explicit solutions for the field inside and outside the laser cavity. The threshold condition for laser light onset is obtained by assuming the field operating in a single collective mode and the usual adiabatic hypothesis. A development that removes this later restriction is also discussed and outlined.

Physical Review A•Sep 1, 1984•39 citations

Intensity characteristics of inversionless lasers from induced atomic coherence

Yifu Zhu, Min Xiao, Yang Zhao

We analyze a laser system consisting of N closed three-level atoms confined in a single-mode cavity and derive the conditions for the onset of lasing without inversion or with inversion. We calculate the steady-state gain and lasing in the system and show that far above the lasing threshold, depending on the pumping and decay rates, the inversionless laser may operate in three different regimes, where the intensity of the laser depends linearly on N, is proportional to \ensuremath{\surd}N , or independent of N.

Physical Review A•May 1, 1994•8 citations

Non-linear properties of strongly pumped lasers

Gennady A. Koganov, R. Shuker

Bloch equations for the atomic population and the polarization/coherence and the equation of motion for the photon number in a laser are solved in steady state as a function of the pump rate. Two level atom and two modes of three levels atom are investigated. Close to threshold the usual linear dependence of the intensity on the pump rate in found for all cases. However, far above threshold strongly nonlinear dependence is encountered. In the cases for which the pump connects the lower lasing state to one of the excited states the character of the non-linearity differs crucially from the cases when the pump in not related directly to the lower lasing state. Non-monotonic dependence of laser intensity upon the pump rate is predicted. Detailed discussion of the nonlinear behavior is presented, including saturation and depletion effects.

arXiv:quant-ph/9801045•Jan 22, 1998•1 citation

Q-function approach to a two-photon laser

Ning Lu

A quantum theory of a two-photon laser is developed by making use of the antinormal-ordering Q function. Starting from the microscopic atom-field interaction Hamiltonian for cascade three-level atoms and including saturable absorbers, we first present a master equation for the field-density operator, and then transform the master equation into a Fokker-Planck equation for the Q function. The Q-function approach enables us to study the two-photon laser analytically, obtaining simple expressions for nonlinear gain, mean photon number, frequency pulling, natural linewidth, and photon-number variance in a unified method. We find that the field in a two-photon laser will build up from a vacuum without triggering if its linear gain is larger than the cavity loss. Also hysteresis can occur in the two-photon laser even without triggering. With an overall two-photon resonance, the normalized photon-number variance approaches a common value 11/8 well above ``threshold,'' independent of the one-photon detuning. We compare these results with previous results obtained from an effective interaction Hamiltonian. We find that the domain of validity of the effective Hamiltonian for the photon-number variance is much smaller than that for the mean photon number. Well above ``threshold'' the effective Hamiltonian overestimates both the natural linewidth and the photon-number variance.

Physical Review A•Dec 1, 1990•12 citations
In this chapter, we turn our considerations to the simplest model of a laser that includes all the essential features of any practical laser. The one-photon losses (due to coupling to the environment), linear gain (due to inverted atoms) and saturation (due to nonlinear loss), that are experienced by a single-mode (laser) cavity are all included in the calculations and their role in the laser properties is fully explored.We point out that all lasersmust have these three elements to operate as a laser. If there is only a linear gain, then of course there can be no output, since an output causes a loss. With both gain and loss, but not saturation, the laser intensity is either near zero (well below threshold), or else it rises infinitely (well above threshold). Neither case is very useful as a model of a real laser, which has a finite output above threshold. This is why a saturation mechanism is needed, such as an intensity dependent nonlinear loss. This simple model used here is then obtainable in the limit of a high-Q laser operating not too far above threshold.
In most cases, laser operation is well described by the semiclassical rate equations that were discussed in Chapters 2 and 8, including pump dependence, frequency pulling and saturation as well as threshold behavior. It is because the laser field is intense, composed of many photons in a mode. So, for laser engineering, we do not need quantum optical theories. However, there are some important issues demanding a full-quantum-mechanical description of the field. One example is the laser linewidth and another is the photon statistics. In this chapter, we will focus on the laser linewidth, namely, how coherent the laser light is by employing a full quantum description of the field. Laser threshold is defined as a condition for anomalous photon number distribution. We will then show that the photon statistics of the laser light approaches that of a coherent state far above the laser threshold. In addition, the laser threshold condition itself is examined and extended to a general form.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
A simple model of a one-dimensional optical cavity having output coupling is used to develop a fully quantized linear laser theory. The present model and procedure, which work directly within the continuous spectrum, allow us to find a simple treatment that leads to explicit solutions for the field inside and outside the laser cavity. The threshold condition for laser light onset is obtained by assuming the field operating in a single collective mode and the usual adiabatic hypothesis. A development that removes this later restriction is also discussed and outlined.
We analyze a laser system consisting of N closed three-level atoms confined in a single-mode cavity and derive the conditions for the onset of lasing without inversion or with inversion. We calculate the steady-state gain and lasing in the system and show that far above the lasing threshold, depending on the pumping and decay rates, the inversionless laser may operate in three different regimes, where the intensity of the laser depends linearly on N, is proportional to \ensuremath{\surd}N , or independent of N.
Bloch equations for the atomic population and the polarization/coherence and the equation of motion for the photon number in a laser are solved in steady state as a function of the pump rate. Two level atom and two modes of three levels atom are investigated. Close to threshold the usual linear dependence of the intensity on the pump rate in found for all cases. However, far above threshold strongly nonlinear dependence is encountered. In the cases for which the pump connects the lower lasing state to one of the excited states the character of the non-linearity differs crucially from the cases when the pump in not related directly to the lower lasing state. Non-monotonic dependence of laser intensity upon the pump rate is predicted. Detailed discussion of the nonlinear behavior is presented, including saturation and depletion effects.
A quantum theory of a two-photon laser is developed by making use of the antinormal-ordering Q function. Starting from the microscopic atom-field interaction Hamiltonian for cascade three-level atoms and including saturable absorbers, we first present a master equation for the field-density operator, and then transform the master equation into a Fokker-Planck equation for the Q function. The Q-function approach enables us to study the two-photon laser analytically, obtaining simple expressions for nonlinear gain, mean photon number, frequency pulling, natural linewidth, and photon-number variance in a unified method. We find that the field in a two-photon laser will build up from a vacuum without triggering if its linear gain is larger than the cavity loss. Also hysteresis can occur in the two-photon laser even without triggering. With an overall two-photon resonance, the normalized photon-number variance approaches a common value 11/8 well above ``threshold,'' independent of the one-photon detuning. We compare these results with previous results obtained from an effective interaction Hamiltonian. We find that the domain of validity of the effective Hamiltonian for the photon-number variance is much smaller than that for the mean photon number. Well above ``threshold'' the effective Hamiltonian overestimates both the natural linewidth and the photon-number variance.