Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Novel Polarization Control Approach to Long-Term Fiber-Optic Frequency Transfer

Dong-Jie Wang, Xiang Zhang, Jie Liu, Dongdong Jiao, Xue Deng, Jing Gao, Qi Zang, Dan Wang, Tao Liu, Ruifang Dong, Shougang Zhang

Published Sep 1, 2020• 5 citations
Publisher

Abstract

We demonstrate a novel polarization control system based on a gradient descent algorithm, applied to a 450-km optical frequency transfer link. The power of the out-loop beat note is retrieved by controlling the polarization state of the transferred signal, with a recovery time of 24 ms, thereby ensuring the long-term evaluation of the fiber link. As a result, data utilization is enhanced from 70% to 99% over a continuous measurement period of ∼12 h. A fractional transfer instability of 7.2 × 10−20 is achieved at an integration time of 10000 s. This work lays the foundation for the comparison of a remote optical clock system via a long-haul optical fiber link.

DOI
10.1088/0256-307x/37/9/094201

Related papers

Robust Transfer of Optical Frequency over 500km Fiber Link with Instability of 10−21

Qian Zhou, Xiang Zhang, Qi Zang +6 more

Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.

Chinese Physics Letters•Jul 25, 2024•7 citations

Coherent Optical Frequency Transfer over 100 km Fiber Link Using Bidirectional Active Optics

Hanxu Wu, Xiaoming Zhang, Weinan Zhao +7 more

SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

Polarization Control for Continuous Optical Frequency Transfer

Przemysław Krehlik, Łukasz Buczek, Łukasz Śliwczyński +1 more

SummaryIn this work we present a solution for controlling the polarization state of the signal reaching the remote laser station terminating the optical frequency transfer link (or its section). The proposed controller eliminates the occasional fading of the beat note between the laser and the incoming signal, which is typically observed due to random wandering of the state of polarization of the signal traveling down an optical fiber. The efficiency of the solution is demonstrated for optical frequency transfer via an optical path consisting of real outdoor fibers, as well as fibers on spools and also polarization scramblers speeding up natural polarization fluctuations.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

Hybrid Fiber-Optic Time-Frequency Transfer for Enhanced Long-Term Frequency Stability

Libo Li, Lina Bai, Kan Zhao +3 more

Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.

Journal of Lightwave Technology•Jan 1, 2026•0 citations

Coherent Optical Frequency Transfer via a 490 km Noisy Fiber Link

Xiang Zhang, Xue Deng, Qi Zang +9 more

We demonstrate the coherent transfer of an ultrastable optical frequency reference over a 490 km noisy field fiber link. The fiber-induced phase noise power spectrum density per-unit-length at 1 Hz offset frequency can reach up to 510 rad2⋅Hz−1⋅km−1, which is much higher than the fiber noise observed in previous reports. This extreme level of phase noise is mainly due to the fiber link laying underground along the highway. Appropriate phase-locked loop parameters are chosen to complete the active compensation of fiber noise by measuring the intensity fluctuation of additional phase noise and designing a homemade digital frequency division phase discriminator with a large phase detection range of 212 π rad. Finally, a noise suppression intensity of approximately 40 dB at 1 Hz is obtained, with fractional frequency instability of 1.1 × 10−14 at 1 s averaging time, and 3.7 × 10−19 at 10000 s. The transfer system will be used for remote atomic clock comparisons and optical frequency distribution over a long-distance communication network established in China.

Chinese Physics Letters•Mar 25, 2022•14 citations

Validating frequency transfer via interferometric fiber links for optical clock comparisons

Sebastian Koke, Erik Benkler, Alexander Kühl +1 more

Abstract We investigate the validation of fiber-based optical frequency transfer for frequency comparison applications. We specifically consider the frequency transfer validation for remote optical clock comparisons and want to ensure interferometric fiber link uncertainty contributions below the combined uncertainty of the clocks under test. The validation is based on signals obtained via looping back from the remote end to the sender site and comparing the input with the output of the loop. These loop-back data need to be averaged over intervals for reaching the validation goal, as the short-term instability of long-distance interferometric fiber links is typically higher than that of optical clocks. We introduce a two-step validation approach and address the finding of a compromise between opposing aspects of averaging: reaching low uncertainties versus achieving a high data coverage of the validated data set via a high temporal resolution of the fault identification. We discuss the impact of different averaging types and of the tolerance of filtering criteria on the achievable estimated uncertainty and on the coverage of the validated data set. Data from four multiple-week-long measurement campaigns on the fiber link between Physikalisch-Technische Bundesansanstalt and University of Strasbourg are used for this assessment.

New Journal of Physics•Aug 26, 2021•11 citations
We demonstrate a novel polarization control system based on a gradient descent algorithm, applied to a 450-km optical frequency transfer link. The power of the out-loop beat note is retrieved by controlling the polarization state of the transferred signal, with a recovery time of 24 ms, thereby ensuring the long-term evaluation of the fiber link. As a result, data utilization is enhanced from 70% to 99% over a continuous measurement period of ∼12 h. A fractional transfer instability of 7.2 × 10−20 is achieved at an integration time of 10000 s. This work lays the foundation for the comparison of a remote optical clock system via a long-haul optical fiber link.
Abstract Our primary objective is to mitigate the adverse effects of temperature fluctuations on the optical frequency transmission system by reducing the length of the interferometer. Following optimization, the phase-temperature coefficient of the optical system is reduced to approximately 1.35 fs/K. By applying a sophisticated temperature control to the remained “out-of-loop” optics fiber, the noise floor of the system has been effectively lowered to 10−21 level. Based on this performance-enhanced transfer system, we demonstrate coherent transmission of optical frequency through 500-km spooled fiber link. After being actively compensated, the transfer instability of 4.5 × 10−16 at the averaging time of 1 s and 5.6 × 10−21 at 10000 s is demonstrated. The frequency uncertainty of received light at remote site relative to that of the origin light at local site is achieved to be 1.15 × 10−19. This enhanced system configuration is particularly well suited for future long-distance frequency transmission and comparison of the most advanced optical clock signals.
SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.
SummaryIn this work we present a solution for controlling the polarization state of the signal reaching the remote laser station terminating the optical frequency transfer link (or its section). The proposed controller eliminates the occasional fading of the beat note between the laser and the incoming signal, which is typically observed due to random wandering of the state of polarization of the signal traveling down an optical fiber. The efficiency of the solution is demonstrated for optical frequency transfer via an optical path consisting of real outdoor fibers, as well as fibers on spools and also polarization scramblers speeding up natural polarization fluctuations.
Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.
We demonstrate the coherent transfer of an ultrastable optical frequency reference over a 490 km noisy field fiber link. The fiber-induced phase noise power spectrum density per-unit-length at 1 Hz offset frequency can reach up to 510 rad2⋅Hz−1⋅km−1, which is much higher than the fiber noise observed in previous reports. This extreme level of phase noise is mainly due to the fiber link laying underground along the highway. Appropriate phase-locked loop parameters are chosen to complete the active compensation of fiber noise by measuring the intensity fluctuation of additional phase noise and designing a homemade digital frequency division phase discriminator with a large phase detection range of 212 π rad. Finally, a noise suppression intensity of approximately 40 dB at 1 Hz is obtained, with fractional frequency instability of 1.1 × 10−14 at 1 s averaging time, and 3.7 × 10−19 at 10000 s. The transfer system will be used for remote atomic clock comparisons and optical frequency distribution over a long-distance communication network established in China.
Abstract We investigate the validation of fiber-based optical frequency transfer for frequency comparison applications. We specifically consider the frequency transfer validation for remote optical clock comparisons and want to ensure interferometric fiber link uncertainty contributions below the combined uncertainty of the clocks under test. The validation is based on signals obtained via looping back from the remote end to the sender site and comparing the input with the output of the loop. These loop-back data need to be averaged over intervals for reaching the validation goal, as the short-term instability of long-distance interferometric fiber links is typically higher than that of optical clocks. We introduce a two-step validation approach and address the finding of a compromise between opposing aspects of averaging: reaching low uncertainties versus achieving a high data coverage of the validated data set via a high temporal resolution of the fault identification. We discuss the impact of different averaging types and of the tolerance of filtering criteria on the achievable estimated uncertainty and on the coverage of the validated data set. Data from four multiple-week-long measurement campaigns on the fiber link between Physikalisch-Technische Bundesansanstalt and University of Strasbourg are used for this assessment.