Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Direct Detection and Mixing at Far-Infrared Frequencies with Superconducting Devices

J. Prince

Published Jan 1, 1993• 0 citations
OpenAlex

Related papers

Difference frequency mixing via spin nonlinearities in the far-infrared

Van Tran Nguyen, T. J. Bridges

Topics in applied physics•Jan 1, 1977•3 citations

Far-Infrared Sensitivity of Superconducting Tunnelling Junctions

H. Matsuo, Takashi Noguchi, Akira Sakamoto +2 more

•Dec 1, 1996•2 citations

Design and analysis of a broadband SIS-mixer for the Heterodyne Instrument for the Far Infrared (HIFI) on the Herschel Space Observatory

R. Teipen

In this thesis the design and analysis of SIS-mixers (SIS: superconductor-isolator-superconductor) for the use as low-noise and broad-band detectors in the submm-region for astronomical observations is described. The SIS-mixers have been developed for the frequency band 2 (636-802 GHz) of the Heterodyne Instrument for the Far Infrared (HIFI) on ESA’s space-observatory Herschel. The required performance baseline has been defined by the HIFI-consortium in terms of the estimated noise temperature contribution of the mixer to be 110 K at 636 GHz and 150 K at 802 GHz. In the frequency region between 80 GHz and 900 GHz Heterodyne SIS mixers are established as the best devices for low noise mixing with a high spectral resolution (mixing of the signal radiation with local oscillator, LO). For the HIFI band 2 mixers, the technology of Nb/Al-Al2O3/Nb-junctions has been used with junction areas of 0.5-1.0 um2, a target value for the current density jc of 15 kA/cm2 and a gap-voltage of 2.75-2.77 mV. For the compensation of the SIS-junction’s intrinsic capacitance and the optimized power coupling to the tunnel junction, two types of matching circuits have been theoretically modelled and experimentally studied: (1) three-step transformer single junction devices and (2) double-junction devices. This has been done for two material combinations: for an all-superconductive micro strip NbTiN/SiO2/Nb, and for the superconductor/normal-conductor combination NbTiN/SiO2/Al...

•Jan 1, 2006•1 citation

Energy-resolved detection of single infrared photons with λ = 8 μm using a superconducting microbolometer

Boris S. Karasik, Sergey Pereverzev, Alexander Soibel +4 more

We report on the detection of single photons with λ = 8 μm using a superconducting hot-electron microbolometer. The sensing element is a titanium transition-edge sensor with a volume ∼0.1 μm3 fabricated on a silicon substrate. Poisson photon counting statistics including simultaneous detection of 3 photons was observed. The width of the photon-number peaks was 0.11 eV, 70% of the photon energy, at 50–100 mK. This achieved energy resolution is one of the best figures reported so far for superconducting devices. Such devices can be suitable for single-photon calorimetric spectroscopy throughout the mid-infrared and even the far-infrared.

arXiv:1207.2164•Applied Physics Letters•Jul 30, 2012•46 citations

High Frequency Properties and Applications of Josephson Junctions from Microwaves to Far-Infrared

Robert Adde, G. Vernet

Springer eBooks•Jan 1, 1977•7 citations

Direct detection at submillimetre wavelengths using superconducting tunnel junctions

S. Withington, K. G. Isaak, S.A. Kovtonyuk +2 more

Infrared Physics & Technology•Dec 1, 1995•11 citations
In this thesis the design and analysis of SIS-mixers (SIS: superconductor-isolator-superconductor) for the use as low-noise and broad-band detectors in the submm-region for astronomical observations is described. The SIS-mixers have been developed for the frequency band 2 (636-802 GHz) of the Heterodyne Instrument for the Far Infrared (HIFI) on ESA’s space-observatory Herschel. The required performance baseline has been defined by the HIFI-consortium in terms of the estimated noise temperature contribution of the mixer to be 110 K at 636 GHz and 150 K at 802 GHz. In the frequency region between 80 GHz and 900 GHz Heterodyne SIS mixers are established as the best devices for low noise mixing with a high spectral resolution (mixing of the signal radiation with local oscillator, LO). For the HIFI band 2 mixers, the technology of Nb/Al-Al2O3/Nb-junctions has been used with junction areas of 0.5-1.0 um2, a target value for the current density jc of 15 kA/cm2 and a gap-voltage of 2.75-2.77 mV. For the compensation of the SIS-junction’s intrinsic capacitance and the optimized power coupling to the tunnel junction, two types of matching circuits have been theoretically modelled and experimentally studied: (1) three-step transformer single junction devices and (2) double-junction devices. This has been done for two material combinations: for an all-superconductive micro strip NbTiN/SiO2/Nb, and for the superconductor/normal-conductor combination NbTiN/SiO2/Al...
We report on the detection of single photons with λ = 8 μm using a superconducting hot-electron microbolometer. The sensing element is a titanium transition-edge sensor with a volume ∼0.1 μm3 fabricated on a silicon substrate. Poisson photon counting statistics including simultaneous detection of 3 photons was observed. The width of the photon-number peaks was 0.11 eV, 70% of the photon energy, at 50–100 mK. This achieved energy resolution is one of the best figures reported so far for superconducting devices. Such devices can be suitable for single-photon calorimetric spectroscopy throughout the mid-infrared and even the far-infrared.