Motivated by recent experimental advancements in the field of cavity-QED on fibre-based platforms, we study a theoretical model for a coupled cavity-QED system with single atoms interacting with a single mode of each cavity. We specialise in parameter regimes that are in alignment with contemporary or near-future iterations of these experiments. We model each atom as a _-system, with one of the atomic transitions coupling to the respective cavity mode, while the other interacts with a coherent, external light field. In modelling the atoms in this manner, STIRAP protocols may be realised to implement fundamental quantum information processing tasks; namely, quantum state transfer and entanglement generation between the two atoms within the system. Employing the Lindblad master equation and input-output formalism, we solve for the spectrum of the steady-state output fields in the situation where a coherent probe laser weakly excites the system. From this, we identify the eigenstates within the limit of a single excitation as well as key properties exhibited by a number of these, including dark states and electromagnetically induced transparency. By investigating the transient dynamics of the system, we derive an effective master equation, where, under specific parameter regimes, it is possible to only consider the interaction between the hyperfine ground states of the _-atoms and a single bosonic mode of the coupled-cavity system. Using quantum trajectory theory we are then able to solve for the dynamics within this reduced basis, and identify a straightforward, probabilistic method of preparing a maximally entangled state with an upper bound of 50% efficiency. Furthermore, we identify a clear “signature” of this entangled state in the output fields of the system. We also investigate the feasibility of implementing the aforementioned STIRAP protocols. We find that within the parameter regime we consider, the effectiveness of these protocols suffer appreciably from dissipation mechanisms within the system. Krotov’s method for quantum optimal control is employed to optimise the control pulse sequences, which is shown to significantly improve the fidelities of these protocols, indicating that high fidelities are achievable in future experimental iterations of these fibre-based systems with slight refinements of atomic coupling strengths and cavity decay rates.
Motivated by recent experimental advancements in the field of cavity-QED on fibre-based platforms, we study a theoretical model for a coupled cavity-QED system with single atoms interacting with a single mode of each cavity. We specialise in parameter regimes that are in alignment with contemporary or near-future iterations of these experiments. We model each atom as a _-system, with one of the atomic transitions coupling to the respective cavity mode, while the other interacts with a coherent, external light field. In modelling the atoms in this manner, STIRAP protocols may be realised to implement fundamental quantum information processing tasks; namely, quantum state transfer and entanglement generation between the two atoms within the system. Employing the Lindblad master equation and input-output formalism, we solve for the spectrum of the steady-state output fields in the situation where a coherent probe laser weakly excites the system. From this, we identify the eigenstates within the limit of a single excitation as well as key properties exhibited by a number of these, including dark states and electromagnetically induced transparency. By investigating the transient dynamics of the system, we derive an effective master equation, where, under specific parameter regimes, it is possible to only consider the interaction between the hyperfine ground states of the _-atoms and a single bosonic mode of the coupled-cavity system. Using quantum trajectory theory we are then able to solve for the dynamics within this reduced basis, and identify a straightforward, probabilistic method of preparing a maximally entangled state with an upper bound of 50% efficiency. Furthermore, we identify a clear “signature” of this entangled state in the output fields of the system. We also investigate the feasibility of implementing the aforementioned STIRAP protocols. We find that within the parameter regime we consider, the effectiveness of these protocols suffer appreciably from dissipation mechanisms within the system. Krotov’s method for quantum optimal control is employed to optimise the control pulse sequences, which is shown to significantly improve the fidelities of these protocols, indicating that high fidelities are achievable in future experimental iterations of these fibre-based systems with slight refinements of atomic coupling strengths and cavity decay rates.
One of the most exciting prospects of quantum physics today is to simulate large quantum systems, intractable by classical computation, by connecting many smaller systems together. A cavity-based quantum network of atoms and photons constitutes one such approach, where each cavity interfaces between stationary atomic qubits in a node and photonic qubits travelling along optical fibre channels. For this scheme to work well, the cavity-based interface must be faithful and well-controlled. In this thesis, we construct a fibre-tip Fabry-Pérot cavity by aligning two optical fibre-tips against each other, where each has a concave, mirror-coated surface. Three properties make it highly suitable for interfacing: a small mode volume for strong atom-photon coupling, directly fibre-coupled cavity light, and optical access for trapped atoms. For the latter, we design a scheme that allows for a 2D reconfigurable array of atoms, held in the cavity mode by holographically-generated optical tweezers. Our particular design will allow us to move atoms independently of one another. We find the atom-cavity system parameters for optimal single photon generation, absorption and remote state transfer using V-STIRAP (vacuum-stimulated emission by Raman adiabatic passage). Using master equations and the Nelder-Mead algorithm, we optimise both the parameters and V-STIRAP pulse shapes to do this. We assemble the first fibre cavity formed of two single-mode fibres in ultra-high vacuum. Aligning two single-mode fibres is particularly demanding; we overcome this with an assembly method that gives permanent sub-micron alignment precision, unlike other similar cavities that need realigning using a translation stage. We fully characterise the cavity's parameters, then test it by probabilistically loading atoms from a magneto-optical trap, measuring the Purcell-enhanced fluorescence from the cavity. Altogether, our advances facilitate deterministically controlled, strongly-coupled and networked quantum systems.
Cavity quantum electrodynamics (cavity QED) systems, in which two-level atoms interact with a single cavity mode, have been studied extensively over the past years. Recently, the first explicitly two-mode cavity QED experiments were carried out. In this thesis, we compute photon correlation functions in a cavity QED system where a single atom couples to two cavity modes with orthogonal linear polarisations. We take into account the full atomic level structure for an F = 3 to F0 = 4 transition, and consider the case where one cavity mode is resonantly driven by a coherent field, while light in the other cavity mode is generated only through atomic emission. From analytic investigations in the weak-excitation limit, we find that two orthogonal manifolds of basis states exist, with transitions between the two manifolds occurring precisely whenever a photon from the non-driven mode is emitted. As a qualitative result, the system displays correlations on two distinct time scales: one, a short time scale, determined by the atomic and cavity-mode decay times; the other (not present in single-mode cavity QED), a much longer time scale, determined by the non-driven-mode emission rate. For a quantitative treatment, we use standard quantum regression formulas and numerical solutions of the master equation for the system density operator to compute steady-state properties and photon correlation functions in the weak-excitation regime; for this, we truncate the cavity mode Hilbert spaces at two-photon states. As with our analytical investigations, we find an extremely long correlation time at the lowest level of excitation, and a shortening of this correlation time as the level of excitation is increased. From a Monte-Carlo simulation based on a quantum trajectory unravelling of the master equation, we recover this dynamic, and explore higher levels of excitations.
A system comprised of a small number of neutral atoms coupled to the mode of a high finesse optical resonator is a model system to study light-matter interaction at the quantum level and to explore fundamental effects like the influence of the measurement process on the atomic state. Promising proposals to generate entangled states in such systems are based on the simultaneous coupling of two atoms to one resonator mode. In chapter 1 of this thesis I shortly summarise the experimental tools to capture, trap, and transport single atoms using a magneto-optical trap and an optical conveyor belt. I discuss theoretical foundations to describe our system and present numerical simulations, the results of which enter the analysis of our experimental data. The average atom-cavity coupling strength is deduced from the measured cavity transmission and compared to a model taking atomic motion into account. The dynamics of the hyperfine spin state of one and two coupled atoms is the focus of chapter 2. I describe a nondestructive cavity-based state detection method, quantify the state detection fidelity, and identify optimum experimental parameters. This method is then used to record random telegraph signals, exhibiting quantum jumps on a timescale of milliseconds. Telegraph signals for two atoms are analysed employing Bayesian statistics, yielding additional information on the evolution of the hyperfine states. A good localisation of the atom is necessary to achieve stable coupling to the cavity mode. In chapter 3, I discuss two different aspects of how the motion of the atom can be controlled. Firstly an intracavity dipole trap is characterised and it is shown that it results in improved confinement of the atom. Secondly I examine the dependence of cavity-cooling forces on our experimental parameters and compare two different cooling regimes.
Simplifying composite open quantum systems through model reduction is central to enable their analytical and numerical understanding. In this work, we introduce a self-consistent approach to eliminate the cavity degrees of freedom of cavity quantum electrodynamics (CQED) devices in the non-adiabatic regime, where the cavity memory time is comparable with the timescales of the atom dynamics. To do so, we consider a CQED system consisting of a two-level atom coupled to a single-mode cavity, both subsystems interacting with the environment through an arbitrary number of ports, within the input-output formalism. A self-consistency equation is derived for the reduced atom dynamics. This allows retrieving an exact expression for the effective Purcell-enhanced emission rate and, under reasonable approximations, a set of self-consistent dynamical equations and input-output relations for the effective two level atom. The resulting reduced model captures non-Markovian features, characterized through an effective Lindblad equation exhibiting two decoherence rates, a positive and a negative one. In the continuous-wave excitation regime, we benchmark our approach by computing effective steady states and output flux expressions beyond the low-power excitation regime, for which a semi-classical treatment is usually applied. We also compute two-time correlations and spectral densities, showing an excellent agreement with full cavity quantum electrodynamics simulations, except in the strong-coupling, high-excitation regime. Our results provide a practical framework for reducing the size of CQED models, which could be generalized to more complex atom and cavity configurations.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.
This thesis addresses challenges in the experimental realisation of optical quantum computing with atom-cavity platforms and develops techniques for experimental quantum control that generalise across a range of quantum modalities. Within the framework of cavity quantum electrodynamics (cQED), methods are developed and numerically validated for fast and precise control of single atoms to generate photonic states of interest. In particular, we consider the generation of high-repetition-rate n-photon bursts and time-bin entangled states. These photonic resources are essential for applications such as boson sampling, multi-photon interference, optical quantum computing, and quantum-enhanced metrology. Experimental improvements in coherent population transfer are demonstrated using adaptive pulse shaping with acousto-optic modulators. Beyond photon generation, the thesis introduces general-purpose pulse-level techniques, including pulse distortion correction, memory-efficient pulse compression, and machine learning-based optimisation. These methods are shown to be transferable to other platforms, such as neutral atom arrays and superconducting qubits. A particular contribution is the implementation of scalable pulse generation using fixed-point compressed pulse representations on FPGA hardware, achieving substantial memory savings while maintaining high fidelity in simulations of quantum operations. Additionally, reinforcement learning is presented as a powerful tool for optimising complex quantum dynamics, with state-of-the-art results demonstrated across various simulated systems. Throughout the thesis, theoretical developments are supported by numerical simulations and partial experimental validation, providing important insights for the development of future quantum technologies.