Quantum illumination has been suggested as a way to improve the sensitivity of remote target detection by taking advantage of quantum entanglement between a traveling electromagnetic beam of light interrogating the target, and a second beam kept in the lab. In the microwave domain, superconducting quantum circuit utilizing superconducting Josephson tunnel junctions can be used as quantum-limited amplifiers of faint microwave signals, as well as bright sources of quantum entangled signals. These Josephson parametric amplifiers (JPAs) are poised to become fundamental building block in a future quantum illumination radar operating in the microwave domain. Demonstrating a practical advantage of quantum illumination with ambient temperature signals is, however, challenging. Indeed, current quantum protocols are not practical as they require a complex receiver with stringent phase-matching conditions, which cannot be met in the field. Notably, it is also not currently known how one can transfer faint microwave signals out of cryogenic systems without destroying their fragile entanglement. In this article, we discuss the recent progress and challenges regarding the development of an all-microwave quantum illumination radar using the recently developed and implemented quantum-enhanced noise radar protocol. This quantum illumination protocol is simpler to implement and procures a quantum enhancement over its classical analog. Finally, we discuss different strategies that may resolve the issue of transmitting microwave entanglement under ambient conditions. We, thus, conclude that successful transmission of entangled microwaves can be done in the near future, with possible demonstrations of practical quantum advantage over short distances.
Quantum illumination has been suggested as a way to improve the sensitivity of remote target detection by taking advantage of quantum entanglement between a traveling electromagnetic beam of light interrogating the target, and a second beam kept in the lab. In the microwave domain, superconducting quantum circuit utilizing superconducting Josephson tunnel junctions can be used as quantum-limited amplifiers of faint microwave signals, as well as bright sources of quantum entangled signals. These Josephson parametric amplifiers (JPAs) are poised to become fundamental building block in a future quantum illumination radar operating in the microwave domain. Demonstrating a practical advantage of quantum illumination with ambient temperature signals is, however, challenging. Indeed, current quantum protocols are not practical as they require a complex receiver with stringent phase-matching conditions, which cannot be met in the field. Notably, it is also not currently known how one can transfer faint microwave signals out of cryogenic systems without destroying their fragile entanglement. In this article, we discuss the recent progress and challenges regarding the development of an all-microwave quantum illumination radar using the recently developed and implemented quantum-enhanced noise radar protocol. This quantum illumination protocol is simpler to implement and procures a quantum enhancement over its classical analog. Finally, we discuss different strategies that may resolve the issue of transmitting microwave entanglement under ambient conditions. We, thus, conclude that successful transmission of entangled microwaves can be done in the near future, with possible demonstrations of practical quantum advantage over short distances.
Quantum radar has emerged as a promising sensing paradigm that exploits quantum resources, including entanglement and quantum correlations, to enhance target detection in noisy and lossy environments. Although entanglement generated by superconducting devices such as Josephson parametric amplifiers, Josephson parametric converters, and Josephson traveling-wave parametric amplifiers is rapidly degraded under realistic propagation conditions, the remaining quantum correlations can still provide a measurable detection advantage through the principles of quantum illumination. This review presents a comprehensive engineering perspective on quantum radar, covering the theoretical foundations of quantum illumination, microwave entanglement generation, electro-optomechanical quantum transducers, atmospheric channel effects, cryogenic receiver architectures, and digital signal-processing techniques. Recent microwave experimental demonstrations are also reviewed, highlighting the transition from theoretical concepts to laboratory-scale implementations. Collectively, these developments demonstrate that microwave quantum radar is evolving toward practical sensing architectures while emphasizing the engineering challenges that must be addressed before real-world deployment.
Quantum illumination is a sensing technique that employs entangled signal-idler beams to improve the detection efficiency of low-reflectivity objects in environments with large thermal noise. The advantage over classical strategies is evident at low signal brightness, a feature which could make the protocol an ideal prototype for non-invasive scanning or low-power short-range radar. Here we experimentally investigate the concept of quantum illumination at microwave frequencies, by generating entangled fields using a Josephson parametric converter which are then amplified to illuminate a room-temperature object at a distance of 1 meter. Starting from experimental data, we simulate the case of perfect idler photon number detection, which results in a quantum advantage compared to the relative classical benchmark. Our results highlight the opportunities and challenges on the way towards a first room-temperature application of microwave quantum circuits.
Detection of low-reflectivity objects can be improved by the so-called Quantum Illumination (QI) procedure. However, quantum detection error probability exponentially decays with the source bandwidth. The Josephson Parametric Amplifiers (JPAs) technology utilized as a source, generating pairs of entangled signals called two-mode squeezed vacuum states, shows a very narrow bandwidth limiting the operation of the Microwave Quantum Illumination (MQI) systems. In this paper, for the first time, a microwave quantum radar setup based on quantum illumination protocol and using a Josephson Traveling Wave Parametric Amplifier (JTWPA) is proposed. We experimentally demonstrate the generation and control of three-wave mixing modes produced by a JTWPA, key enabler radiation source for MQI schemes. Measurement results of the developed JTWPA, pumped at 12 GHz, show the capability to generate entangled modes in the X-band, making our MQI system a promising candidate for the detection of stealth objects.
Quantum illumination uses entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. Its advantage is particularly evident at low signal powers, a promising feature for applications such as noninvasive biomedical scanning or low-power short-range radar. Here, we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields to illuminate a room-temperature object at a distance of 1 m in a free-space detection setup. We implement a digital phase-conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions, despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared with the relative classical benchmark. Our results highlight the opportunities and challenges in the way toward a first room-temperature application of microwave quantum circuits.
Broadly speaking, in quantum illumination we can say that a proposed protocol has a “quantum advantage” if it outperforms all possible classical protocols. In the optical domain of LIDAR, this is the most useful metric as lasers can routinely produce nearly ideal classical states of light at room temperature (RT). This is not the case in the microwave domain of RADAR where the photon energy is much less than the 300K thermal energy, meaning that a real RT microwave source will always be contaminated by significant thermal noise. Thus, it is not clear if it is technologically possible to produce an ideal classical microwave signal at RT. It is therefore interesting to ask if a microwave quantum illumination protocol can have a “practical advantage” compared to the best technologically feasible RT microwave source. In this paper, we look to frame this question more precisely. As a concrete example, we present experimental results showing that, contrary to recent claims in the literature [1], an entangled microwave source amplified by a cryogenic HEMT amplifier fails to obtain any performance advantage over a simply constructed RT source and, in facts, performs significantly worse. We present a simple theory which explains the experimental results and which offers guidance on how a practical advantage might be achieved.
Microwave quantum illumination (QI) represents a paradigm shift in low-power wireless radar detection, leveraging entanglement between signal and idler microwave photons to achieve detection performance exceeding classical limits by up to 6 dB in error exponent, particularly in high-noise environments where traditional coherent radars falter. This comprehensive survey delineates the theoretical foundations and practical protocols of microwave QI, beginning with two-mode squeezed vacuum state generation using Josephson parametric amplifiers in cryogenic setups, which produce highly correlated photon pairs resilient to channel decoherence. Receiver architectures, including optical parametric amplifier-single-photon avalanche diode (OPA-SPADE) systems with sum-frequency generation for joint measurements and digital phase-conjugation for computational correlation recovery, enable efficient extraction of quantum discord even after significant atmospheric loss or low target reflectivity (under 1%).Performance analyses under realistic thermal noise models ( ) and -loss channels confirm sustained quantum advantages via the quantum Chernoff exponent , validated by ray-tracing simulations showing doubled detection range at fixed power and lab experiments at 10 GHz carriers detecting weak reflectors amid 100 K noise. Low-power optimizations such as adaptive entanglement tuning, chirped pulse shaping, and neural network-aided parameter selection yield 50% energy reductions without sacrificing fidelity, making QI viable for battery-limited platforms. Applications encompass short-range automotive/UAV radar for fog-penetrating obstacle avoidance, non-invasive biomedical subsurface imaging with safe radiation levels, covert perimeter security against jamming, and seamless integration into 6G networks via joint communication-sensing waveforms at mm Wave/THz bands. The paper identifies key challenges including multi-target scalability, real-time gigascale processing, and quantum RF interface standardization, proposing hybrid quantum-classical frameworks and entanglement-swapped sensor arrays as pathways to deployment. This work bridges quantum optics with RF engineering, equipping researchers with blueprints for prototyping transformative quantum-enhanced wireless sensing systems.