Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Radioelectronics Nanosystems Information Technologies

The Decoding Algorithms For Error-Correcting Product Codes Based On Project Geometry Low-Density Parity-Check Codes

Л. Е. Назаров

Published Oct 30, 2020• 0 citations
Publisher

Abstract

The focus of this paper is directed towards the investigation of the characteristics of symbol-by-symbol iterative decoding algorithms for error-correcting block product-codes (block turbo-codes) which enable to reliable information transfer at relatively low received signal/noise and provide high power efficiency. Specific feature of investigated product codes is construction with usage of low-density parity-check codes (LDPC) and these code constructions are in the class of LDPC too. According to this fact the considered code constructions have symbol-by-symbol decoding algorithms developed for total class LDPC codes, namely BP (belief propagation) and its modification MIN_SUM_BP. The BP decoding algorithm is iterative and for implementation the signal/noise is required, for implementation of MIN_SUM_BP decoding algorithm the signal/noise is not required. The resulted characteristics of product codes constructed with usage of LDPC based on project geometry (length of code words, information volume, code rate, error performances) are presented in this paper. These component LDPC codes are cyclic and have encoding and decoding algorithms with low complexity implementation. The computer simulations for encoding and iterative symbol-by-symbol decoding algorithms for the number of turbo-codes with different code rate and information volumes are performed. The results of computer simulations have shown that MIN_SUM_BP decoding algorithm is more effective than BP decoding algorithm for channel with additive white gaussian noise concerning error-performances.

DOI
10.17725/rensit.2020.12.399

Related papers

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network Technologies•Apr 1, 2015•1 citation

Düşük yoğunluklu eşlik denetim kodları için kod çözme algoritmalarının karşılaştırılması.

Kolaylı, Mert

Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.

•Jan 1, 2006•0 citations

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

•Jan 1, 2007•2 citations

Reduced complexity decoding algorithms for low-density parity check codes and turbo codes

Jinghu Chen, M.P.C. Fossorier

Iterative decoding techniques have been receiving more and more attentions with the invention of turbo codes and the rediscovery of low-density parity-check (LDPC) codes. An important aspect in the study of iterative decoding is the tradeoff between decoding performance and complexities. For both LDPC codes and turbo codes, optimum decoding algorithms can provide very good performance. However, complicated operations are involved in the optimum decoding, and prohibit the wide applications of LDPC codes and turbo codes in the next generation digital communication and storage systems. Although there exist sub-optimum decoding algorithms for both LDPC codes and turbo codes, the decoding performance is degraded with the sub-optimum algorithms, and under some circumstances, the gap is very large. This research investigates the reduced complexity decoding algorithms of LDPC codes and turbo codes. For decoding LDPC codes, new algorithms, namely the normalized BP-based algorithm and the offset BP-based algorithm, are proposed. For these two reduced complexity algorithms, density evolution algorithms are derived, and are used to determine the best decoder parameters associated with each of the algorithms. Numerical results show that the new algorithms can achieve near optimum decoding performances for infinite code lengths, and simulation results reveal the same conclusion for short to medium code lengths. In addition to the advantage of low computational complexities, the two new algorithms are less subject to quantization errors and correlation effects than the optimum BP algorithm, and consequently are more suitable for hardware implementation. For a special kind of LDPC codes - the geometric LDPC codes, we propose the normalized APP-based algorithm, which is even more simplified yet still can achieve the near optimum performance. For decoding turbo codes, two new sub-optimum decoding algorithms are proposed. The first is the bi-directional soft-output Viterbi algorithm (bi-SOVA), which is based on utilizing a backward SOYA decoding in addition to the conventional forward one, and can achieve better performance than the uni-directional SOYA. The second is the normalized Max-Log-MAP algorithm, which improves the performance of the Max-Log-MAP decoding by scaling the soft outputs with some predetermined factors.

•Jan 1, 2003•23 citations

Low density parity check codes: construction based on finite geometries

Y. Kou, Shu Lin, M.P.C. Fossorier

Low density parity check (LDPC) codes with iterative decoding based on belief propagation (IDBP) achieve astonishing error performance close to the Shannon limit. Until now there has been no known method for constructing these Shannon limit approaching codes systematically. Good LDPC codes are largely generated by computer search. As a result, the encoding of long LDPC codes is in general very complex. This paper presents the first algebraic method for constructing LDPC codes systematically based on finite analytic geometries. Four classes of finite geometry LDPC codes with relatively good minimum distances are constructed. These codes are either cyclic or quasi-cyclic and therefore their encoding can be implemented with simple linear feedback shift registers. Long finite geometry LDPC codes have been constructed and they achieve an error performance only a few tenths of a dB away from the Shannon limit. Finite geometry LDPC codes are strong competitors to turbo codes for error control in communication and digital data storage systems.

Globecom•Nov 7, 2002•46 citations

Low Density Parity Check Codes Based on Finite Geometries: A Rediscovery and More

Yu Kou, Shu Lin, M.P.C. Fossorier

Low density parity check (LDPC) codes with iterative decoding based on belief propagation achieve astonishing error performance close to Shannon limit. No algebraic or geometric method for constructing these codes has been reported and they are largely generated by computer search. As a result, encoding of long LDPC codes is in general very complex. This paper presents two classes of high rate LDPC codes whose constructions are based on finite Euclidean and projective geometries, respectively. These classes of codes a.re cyclic and have good constraint parameters and minimum distances. Cyclic structure adows the use of linear feedback shift registers for encoding. These finite geometry LDPC codes achieve very good error performance with either soft-decision iterative decoding based on belief propagation or Gallager's hard-decision bit flipping algorithm. These codes can be punctured or extended to obtain other good LDPC codes. A generalization of these codes is also presented.

•Oct 20, 1999•86 citations
The focus of this paper is directed towards the investigation of the characteristics of symbol-by-symbol iterative decoding algorithms for error-correcting block product-codes (block turbo-codes) which enable to reliable information transfer at relatively low received signal/noise and provide high power efficiency. Specific feature of investigated product codes is construction with usage of low-density parity-check codes (LDPC) and these code constructions are in the class of LDPC too. According to this fact the considered code constructions have symbol-by-symbol decoding algorithms developed for total class LDPC codes, namely BP (belief propagation) and its modification MIN_SUM_BP. The BP decoding algorithm is iterative and for implementation the signal/noise is required, for implementation of MIN_SUM_BP decoding algorithm the signal/noise is not required. The resulted characteristics of product codes constructed with usage of LDPC based on project geometry (length of code words, information volume, code rate, error performances) are presented in this paper. These component LDPC codes are cyclic and have encoding and decoding algorithms with low complexity implementation. The computer simulations for encoding and iterative symbol-by-symbol decoding algorithms for the number of turbo-codes with different code rate and information volumes are performed. The results of computer simulations have shown that MIN_SUM_BP decoding algorithm is more effective than BP decoding algorithm for channel with additive white gaussian noise concerning error-performances.
Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.
Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
Iterative decoding techniques have been receiving more and more attentions with the invention of turbo codes and the rediscovery of low-density parity-check (LDPC) codes. An important aspect in the study of iterative decoding is the tradeoff between decoding performance and complexities. For both LDPC codes and turbo codes, optimum decoding algorithms can provide very good performance. However, complicated operations are involved in the optimum decoding, and prohibit the wide applications of LDPC codes and turbo codes in the next generation digital communication and storage systems. Although there exist sub-optimum decoding algorithms for both LDPC codes and turbo codes, the decoding performance is degraded with the sub-optimum algorithms, and under some circumstances, the gap is very large. This research investigates the reduced complexity decoding algorithms of LDPC codes and turbo codes. For decoding LDPC codes, new algorithms, namely the normalized BP-based algorithm and the offset BP-based algorithm, are proposed. For these two reduced complexity algorithms, density evolution algorithms are derived, and are used to determine the best decoder parameters associated with each of the algorithms. Numerical results show that the new algorithms can achieve near optimum decoding performances for infinite code lengths, and simulation results reveal the same conclusion for short to medium code lengths. In addition to the advantage of low computational complexities, the two new algorithms are less subject to quantization errors and correlation effects than the optimum BP algorithm, and consequently are more suitable for hardware implementation. For a special kind of LDPC codes - the geometric LDPC codes, we propose the normalized APP-based algorithm, which is even more simplified yet still can achieve the near optimum performance. For decoding turbo codes, two new sub-optimum decoding algorithms are proposed. The first is the bi-directional soft-output Viterbi algorithm (bi-SOVA), which is based on utilizing a backward SOYA decoding in addition to the conventional forward one, and can achieve better performance than the uni-directional SOYA. The second is the normalized Max-Log-MAP algorithm, which improves the performance of the Max-Log-MAP decoding by scaling the soft outputs with some predetermined factors.
Low density parity check (LDPC) codes with iterative decoding based on belief propagation (IDBP) achieve astonishing error performance close to the Shannon limit. Until now there has been no known method for constructing these Shannon limit approaching codes systematically. Good LDPC codes are largely generated by computer search. As a result, the encoding of long LDPC codes is in general very complex. This paper presents the first algebraic method for constructing LDPC codes systematically based on finite analytic geometries. Four classes of finite geometry LDPC codes with relatively good minimum distances are constructed. These codes are either cyclic or quasi-cyclic and therefore their encoding can be implemented with simple linear feedback shift registers. Long finite geometry LDPC codes have been constructed and they achieve an error performance only a few tenths of a dB away from the Shannon limit. Finite geometry LDPC codes are strong competitors to turbo codes for error control in communication and digital data storage systems.
Low density parity check (LDPC) codes with iterative decoding based on belief propagation achieve astonishing error performance close to Shannon limit. No algebraic or geometric method for constructing these codes has been reported and they are largely generated by computer search. As a result, encoding of long LDPC codes is in general very complex. This paper presents two classes of high rate LDPC codes whose constructions are based on finite Euclidean and projective geometries, respectively. These classes of codes a.re cyclic and have good constraint parameters and minimum distances. Cyclic structure adows the use of linear feedback shift registers for encoding. These finite geometry LDPC codes achieve very good error performance with either soft-decision iterative decoding based on belief propagation or Gallager's hard-decision bit flipping algorithm. These codes can be punctured or extended to obtain other good LDPC codes. A generalization of these codes is also presented.