Accurate descriptions of the electronic properties of molecules, solids and other materials are crucial in the development of many modern technologies, and are therefore the subject of much scientific research. In tandem with experimental research, computational simulations play a huge role. Density functional theory (DFT) is the most popular method for performing ground-state electronic structure calculations due to its accuracy in many situations along with its computational efficiency. Its time-dependent extension (TDDFT) allows the modelling of the dynamics of systems of interacting electrons. (TD)DFT is an exact theory in principle, but requires approximations in practice, specifically to the many-body effects of electron exchange and correlation (xc), which are described by some unknown universal functional. Despite much success, it often proves inadequate in many scenarios of increasing interest. Therefore, we aim to contribute to the development of improved approximate density functionals. \n \nIn this thesis, we take the approach of studying small model systems for which we can compute the exact functionals. These systems are designed to exhibit the key features present in realistic quantum systems, such as atoms and molecules, which the exact universal (TD)DFT functional is capable of describing, but are often ill-described by the commonly used approximations. By analysing the nature of these exact functionals, we gain valuable insight into their fundamental properties, together with identifying where the current approximations are lacking, thereby allowing us to suggest how these approximations may be improved.
Accurate descriptions of the electronic properties of molecules, solids and other materials are crucial in the development of many modern technologies, and are therefore the subject of much scientific research. In tandem with experimental research, computational simulations play a huge role. Density functional theory (DFT) is the most popular method for performing ground-state electronic structure calculations due to its accuracy in many situations along with its computational efficiency. Its time-dependent extension (TDDFT) allows the modelling of the dynamics of systems of interacting electrons. (TD)DFT is an exact theory in principle, but requires approximations in practice, specifically to the many-body effects of electron exchange and correlation (xc), which are described by some unknown universal functional. Despite much success, it often proves inadequate in many scenarios of increasing interest. Therefore, we aim to contribute to the development of improved approximate density functionals. \n \nIn this thesis, we take the approach of studying small model systems for which we can compute the exact functionals. These systems are designed to exhibit the key features present in realistic quantum systems, such as atoms and molecules, which the exact universal (TD)DFT functional is capable of describing, but are often ill-described by the commonly used approximations. By analysing the nature of these exact functionals, we gain valuable insight into their fundamental properties, together with identifying where the current approximations are lacking, thereby allowing us to suggest how these approximations may be improved.
Providing sufficient accuracy at low-computational cost, not surprisingly, density-functional theory ( DFT ) is a standard tool in theoretical material science. Similarly, quantum-electrodynamical density-functional theory ( QEDFT ) provides a promising route to describe experiments at the interface of quantum optics and quantum chemistry. Formally, in the Kohn-Sham ( KS ) formulation of DFT and QEDFT the exact many-particle Schrödinger equation is replaced by a set of coupled non-linear one-particle differential equations. The electron-electron, the electron-ion and the electron-photon interactions of the interacting system are mimicked by their corresponding effective KS potential with an, in principle unknown exchange-correlation ( xc ) term. In practice, DFT and QEDFT require approximations for this xc potential. The quality of which fully determines how much the DFT and QEDFT observables deviate from the exact ones. Understanding the shortcomings and improving the quality of approximate functionals makes the study of the exact functional of model systems indispensable. Here, we employ exact diagonalization for the Hamiltonian of different types of real-space lattice models in one spatial dimension to access the ground-state wave function, and thus to explicitly construct the exact functionals of DFT and QEDFT . To study the functional behavior of purely electronic systems, we consider two singlet-state electrons moving in an external potential with two connected atomic wells of variable depth and distance. To study coupled electron-photon systems, we consider the Rabi Hamiltonian with variable electron-photon coupling strength. By varying the model parameters, we systematically construct the functionals for systems from weak to strong coupling between the building blocks of the global system. Using the concept of the effective density-to- potential map, we discuss the intrasystem steepening which is an exact condition on the xc functional that captures the static correlation present in the system and carve out how it relates to the well-known intersystem derivative discontinuity. We further construct arbitrary observables as functionals of the internal variables which are directly affected by such features of the effective density-to-potential map. By constructing the reduced dipole map in the four-particle case of coupled electron-photon system, we show that the density-to-potential map helps to identify and understand recently discovered physical effects in the field of strongly coupled electron-photon systems. This work provides a contribution to the development of approximate function- als required in practical density-functional calculations of arbitrary experimentally accessible observables. Both the intrasystem steepening and the intersystem derivative discontinuity play a crucial role for systems with highly-localized electrons. Including both features in approximate functionals will improve the accu- racy of DFT evaluation of observables for such systems. Those results provide novel insight into the properties of the exact xc potentials in QEDFT . This work opens a new route to construct new functionals using coarse-grained or embed- ding approaches within the general and exact frameworks of DFT and QEDFT.
Ab-initio calculations are dominated by density functional theory (DFT), which provides an efficient and accurate description of the electronic structure for most materials. For materials with strong correlations, however, many of the available density functionals yield poor results. Most well known is the case of transition metal oxides, for which most density functionals produce a qualitatively incorrect description. There is a quest to improve the description by borrowing from methods specifically designed for strongly correlated materials. One of the method which is widely used to study strongly correlated electron system in the thermodynamic limit is the dynamical mean-field theory (DMFT). For calculations pertaining to real materials, hybrid approaches like DFT+DMFT are commonly used. We consider reduced density-matrix functional theory (rDMFT) to be a useful framework for a rigorous formulation of such hybrid theories. The link from rDMFT to many-particle wave functions has been established by Levy's constrained-search algorithm on the one hand. The link to many-body perturbation theory and Green's function, on the other hand, has been provided via the Luttinger-Ward functional. The development in the field of rDMFT proceeded analogously to the development of DFT. In order to avoid the full complexity of an explicit many-body description, most density-matrix functionals are not extracted from the exact expressions i.e. via Levy's constrained-search or Green's function based methods . Rather, one proceeds analogously to the development of density functionals, namely by searching models for the density-matrix functional, that capture the most essential physical effects while having an algebraic dependence on the density matrix. Among such models, the most prominent ones are the Müller functional, Sharma functional and Marques-Lathiotakis functional. One of the major arguments in favor of density-matrix functionals is that one of the most simple functionals, the Müller functional, seems to provide a correct description of the bond-dissociation problem, for which common density functionals fail. Despite the successes, the common density-matrix functionals also reproduce a number of features in a qualitatively incorrect manner. Several such discrepancies of the standard state of the art density-matrix functionals are discussed in details in this thesis. The objective of this thesis is to study the performance of the class of commonly used model density-matrix functionals and to set the stage for the desire to develop the framework for an approximate scheme to evaluate new class of functionals from exact Green's function based method.
Abstract This article is a short introduction to the modern computational techniques used to tackle the many-body problem in materials. The aim is to present the basic ideas, using simple examples to illustrate strengths and weaknesses of each method. We will start from density-functional theory (DFT) and the Kohn–Sham construction—the standard computational tools for performing electronic structure calculations. Leaving the realm of rigorous density-functional theory, we will discuss the established practice of adopting the Kohn–Sham Hamiltonian as approximate model. After recalling the triumphs of the Kohn–Sham description, we will stress the fundamental reasons of its failure for strongly-correlated compounds, and discuss the strategies adopted to overcome the problem. The article will then focus on the most effective method so far, the DFT+DMFT technique and its extensions. Achievements, open issues and possible future developments will be reviewed. The key differences between dynamical (DFT+DMFT) and static (DFT+ U ) mean-field methods will be elucidated. In the conclusion, we will assess the apparent dichotomy between first-principles and model-based techniques, emphasizing the common ground that in fact they share.
First-principles electronic structure theory explains properties of atoms, molecules and solids from underlying physical principles without input from empirical parameters. Time-dependent density functional theory (TDDFT) has emerged as arguably the most widely used first-principles method for describing the time-dependent quantum mechanics of many-electron systems. In this thesis, we will show how the fundamental principles of TDDFT can be extended and applied in two novel directions: The theory of open quantum systems (OQS) and quantum computation (QC). In the first part of this thesis, we prove theorems that establish the foundations of TDDFT for open quantum systems (OQS-TDDFT). OQS-TDDFT allows for a first principles description of non-equilibrium systems, in which the electronic degrees of freedom undergo relaxation and decoherence due to coupling with a thermal environment, such as a vibrational or photon bath. We then discuss properties of functionals in OQS-TDDFT and investigate how these differ from functionals in conventional TDDFT using an exactly solvable model system. Next, we formulate OQS-TDDFT in the linear-response regime, which gives access to environmentally broadened excitation spectra. Lastly, we present a hybrid approach in which TDDFT can be used to construct master equations from first-principles for describing energy transfer in condensed phase systems. In the second part of this thesis, we prove that the theorems of TDDFT can be extended to a class of qubit Hamiltonians that are universal for quantum computation. TDDFT applied to universal Hamiltonians implies that single-qubit expectation values can be used as the basic variables in quantum computation and information theory, rather than wavefunctions. This offers the possibility of simplifying computations by using the principles of TDDFT similar to how it is applied in electronic structure theory. Lastly, we discuss a related result; the computational complexity of TDDFT.
Most realistic calculations of moderately correlated materials begin with a ground-state density functional theory (DFT) calculation. While Kohn-Sham DFT is used in about 40,000 scientific papers each year, the fundamental underpinnings are not widely appreciated. In this chapter, we analyze the inherent characteristics of DFT in their simplest form, using the asymmetric Hubbard dimer as an illustrative model. We begin by working through the core tenets of DFT, explaining what the exact ground-state density functional yields and does not yield. Given the relative simplicity of the system, almost all properties of the exact exchange-correlation functional are readily visualized and plotted. Key concepts include the Kohn-Sham scheme, the behavior of the XC potential as correlations become very strong, the derivative discontinuity and the difference between KS gaps and true charge gaps, and how to extract optical excitations using time-dependent DFT. By the end of this text and accompanying exercises, the reader will improve their ability to both explain and visualize the concepts of DFT, as well as better understand where others may go wrong.
Conspectus Ab initio modeling of matter has become a pillar of chemical research: with ever-increasing computational power, simulations can be used to accurately predict, for example, chemical reaction rates, electronic and mechanical properties of materials, and dynamical properties of liquids. Many competing quantum mechanical methods have been developed over the years that vary in computational cost, accuracy, and scalability: density functional theory (DFT), the workhorse of solid-state electronic structure calculations, features a good compromise between accuracy and speed. However, approximate exchange-correlation functionals limit DFT's ability to treat certain phenomena or states of matter, such as charge-transfer processes or strongly correlated materials. Furthermore, conventional DFT is purely a ground-state theory: electronic excitations are beyond its scope. Excitations in molecules are routinely calculated using time-dependent DFT linear response; however applications to condensed matter are still limited. By contrast, many-electron wavefunction methods aim for a very accurate treatment of electronic exchange and correlation. Unfortunately, the associated computational cost renders treatment of more than a handful of heavy atoms challenging. On the other side of the accuracy spectrum, parametrized approaches like tight-binding can treat millions of atoms. In view of the different (dis-)advantages of each method, the simulation of complex systems seems to force a compromise: one is limited to the most accurate method that can still handle the problem size. For many interesting problems, however, compromise proves insufficient. A possible solution is to break up the system into manageable subsystems that may be treated by different computational methods. The interaction between subsystems may be handled by an embedding formalism. In this Account, we review embedded correlated wavefunction (CW) approaches and some applications. We first discuss our density functional embedding theory, which is formally exact. We show how to determine the embedding potential, which replaces the interaction between subsystems, at the DFT level. CW calculations are performed using a fixed embedding potential, that is, a non-self-consistent embedding scheme. We demonstrate this embedding theory for two challenging electron transfer phenomena: (1) initial oxidation of an aluminum surface and (2) hot-electron-mediated dissociation of hydrogen molecules on a gold surface. In both cases, the interaction between gas molecules and metal surfaces were treated by sophisticated CW techniques, with the remainder of the extended metal surface being treated by DFT. Our embedding approach overcomes the limitations of conventional Kohn-Sham DFT in describing charge transfer, multiconfigurational character, and excited states. From these embedding simulations, we gained important insights into fundamental processes that are crucial aspects of fuel cell catalysis (i.e., O2 reduction at metal surfaces) and plasmon-mediated photocatalysis by metal nanoparticles. Moreover, our findings agree very well with experimental observations, while offering new views into the chemistry. We finally discuss our recently formulated potential-functional embedding theory that provides a seamless, first-principles way to include back-action onto the environment from the embedded region.