Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

Timing Jitter in NbN Superconducting Microstrip Single-Photon Detector

Denis Yu. Vodolazov, N. N. Manova, Yu. P. Korneeva, Alexander A. Korneev

Published Oct 21, 2020• 25 citations
Publisher

Abstract

We experimentally study timing jitter of single-photon detection by NbN superconducting strips with width $w$ ranging from 190 nm to $3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$. We find that timing jitter of both narrow (190 nm) and micron-wide strips is about 40 ps at currents where internal detection efficiency $\ensuremath{\eta}$ saturates and it is close to our instrumental jitter. We also calculate intrinsic timing jitter in wide strips using the modified time-dependent Ginzburg-Landau equation coupled with a two-temperature model. We find that with increasing width the intrinsic timing jitter increases and the effect is most considerable at currents where a rapid growth of $\ensuremath{\eta}$ changes to saturation. We relate it with complicated vortex and antivortex dynamics, which depends on a photon's absorption site across the strip and its width. The model also predicts that at current close to depairing current the intrinsic timing jitter of a wide strip could be about $\ensuremath{\hbar}/{k}_{B}{T}_{c}$ (${T}_{c}$ is a critical temperature of superconductor), i.e., the same as for a narrow strip.

DOI
10.1103/physrevapplied.14.044041

Related papers

Superconducting NbN microstrip single-photon detectors

Alexander A. Korneev

Superconducting Single-Photon Detectors (SSPD) invented two decades ago have evolved to a mature technology and have become devices of choice in the advanced applications of quantum optics, such as quantum cryptography and optical quantum computing. In these applications SSPDs are coupled to single-mode fibers and feature almost unity detection efficiency, negligible dark counts, picosecond timing jitter and MHz photon count rate. Meanwhile, there are great many applications requiring coupling to multi-mode fibers or free space. `Classical’ SSPDs with 100-nm-wide superconducting strip and covering area of about 100 µm2 are not suitable for further scaling due to degradation of performance and low fabrication yield. Recently we have demonstrated single-photon counting in micron-wide superconducting bridges and strips. Here we present our approach to the realization of practical photon-counting detectors of large enough area to be efficiently coupled to multi-mode fibers or free space. The detector is either a meander or a spiral of 1-µm-wide strip covering an area of 50x50 µm2. Being operated at 1.7K temperature it demonstrates the saturated detection efficiency (i.e. limited by the absorption in the detector) up to 1550 nm wavelength, about 10 ns dead time and timing jitter in range 50-100 ps.

Quantum Optics and Photon Counting•Apr 19, 2021•0 citations

Characterization and Active Control of Position-Dependent Timing Dynamics in Superconducting Strip Single-Photon Detectors

Sahil R. Patel, Kristen M. Parzuchowski, Eli Mueller +6 more

Superconducting strip single-photon detectors (SSPDs) have emerged as scalable, wide-strip variants of traditional nanowire counterparts. Despite practical advantages including improved optical fill factors and enhanced signal-to-noise ratios the fundamental detection physics governing these micro-scale geometries remains largely unexplored. Here, we investigate the underlying photoresponse of a 20 um-wide tungsten silicide SSPD, demonstrating a slew-rate-corrected timing jitter of 13.2 ps at 532 nm and 20.5 ps at 1550 nm, alongside saturated internal detection efficiency up to 1550 nm. Using focused free-space optical scanning, we reveal that detector timing jitter is strongly influenced by a spatially dependent slew rate between edge and center absorption events. To mitigate this impact, we utilize a parallel superconducting rail architecture to actively redistribute supercurrent. This in-situ tuning minimizes the latency mismatch and mitigates thermally activated intrinsic dark counts, extending the device's ability to operate at higher temperatures. Finally, comparing these dynamics with time-dependent Ginzburg-Landau (TDGL) modeling elucidates the physical origins of the position-dependent photoresponse, highlighting how superconducting rails or specialized readout electronics can mitigate negative impacts on timing jitter.

physics.ins-detCross-listedarXiv:2609.28897•Sep 25, 2026•0 citations

Spectral sensitivity of narrow strip NbN superconducting single-photon detector

Alexander A. Korneev, Yu. P. Korneeva, Irina Florya +2 more

Superconducting single-photon detector (SSPD) is patterned from 4-nm-thick NbN film deposited on sapphire substrate as a 100-nm-wide strip. Due to its high detection efficiency, low dark counts, and picosecond timing jitter SSPD has become a competitor to the InGaAs avalanche photodiodes at 1550 nm and longer wavelengths. Although the SSPD is operated at liquid helium temperature its efficient single-mode fibre coupling enabled its usage in many applications ranging from single-photon sources research to quantum cryptography. In our strive to increase the detection efficiency at 1550 nm and longer wavelengths we developed and fabricated SSPD with the strip almost twice narrower compared to the standard 100 nm. To increase the voltage response of the device we utilized cascade switching mechanism: we connected 50-nm-wide and 10-μm-long strips in parallel covering the area of 10 μmx10 μm. Absorption of a photon breaks the superconductivity in a strip leading to the bias current redistribution between other strips followed their cascade switching. As the total current of all the strips about is 1 mA by the order of magnitude the response voltage of such an SSPD is several times higher compared to the traditional meander-shaped SSPDs. In middle infrared (about 3 μm wavelength) these devices have the detection efficiency several times higher compared to the traditional SSPDs.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 29, 2011•3 citations

Simulation of Intrinsic Timing Jitter in Inhomogeneous NbN Nanostrip Photon Detectors

Chang Xu, Xiaolong Hu

We simulate photon-triggered vortex dynamics in an inhomogeneous NbN nanostrip using time-dependent Ginzburg-Landau equation and Monte Carlo method, revealing inhomogeneity-induced intrinsic timing jitter in superconducting strip photon detectors (SSPDs) during the initial resistive-belt formation process.

International Conference on Optical Communications and Networks (ICOCN)•Jul 28, 2025•0 citations

Superconducting microstrip single-photon detector with system detection efficiency over 90% at 1550 nm

Guangzhao Xu, Wei-Jun Zhang, Li-Xing You +9 more

Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ∼ 100 nm . Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons. Compared with the SNSPD covering the same area, the superconducting microstrip single-photon detector (SMSPD) has smaller kinetic inductance, higher working current, and lower requirements in fabrication accuracy, providing potential applications in the development of ultralarge active area detectors. However, the study of SMSPD is still in its infancy, and the realization of its high-performance and practical use remains an open question. This study demonstrates a NbN SMSPD with a nearly saturated system detection efficiency (SDE) of ∼ 92.2 % at a dark count rate of ∼ 200 cps , a polarization sensitivity of ∼ 1.03 , and a minimum timing jitter of ∼ 48 ps at the telecom wavelength of 1550 nm when coupled with a single-mode fiber and operated at 0.84 K. Furthermore, the detector’s SDE is over 70% when operated at a 2.1 K closed-cycle cryocooler.

arXiv:2101.05407•Photonics Research•Mar 23, 2021•72 citations

Probabilistic vortex crossing criterion for superconducting nanowire single-photon detectors

Saman Jahani, Li-Ping Yang, Adrián Buganza Tepole +3 more

Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultraviolet frequencies. Despite recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on single-vortex (flux quanta) crossing the width of the nanowire. Our model makes a connection between the dark counts and photon counts near the detection threshold. The finite-difference calculations demonstrate that a change in the bias current distribution as a result of the photon absorption significantly increases the probability of single-vortex crossing even if the vortex potential barrier has not vanished completely. We estimate the instrument response function and show that the timing uncertainty of this vortex tunneling process corresponds to a fundamental limit in timing jitter of the click event. We demonstrate a trade-space between this intrinsic (quantum) timing jitter, quantum efficiency, and dark count rate in TaN, WSi, and NbN superconducting nanowires at different experimental conditions. Our detection model can also explain the experimental observation of exponential decrease in the quantum efficiency of SNSPDs at lower energies. This leads to a pulse-width dependency in the quantum efficiency, and it can be further used as an experimental test to compare across different detection models.

arXiv:1901.09291•Journal of Applied Physics•Apr 9, 2020•19 citations
We experimentally study timing jitter of single-photon detection by NbN superconducting strips with width www ranging from 190 nm to 3\ensuremathμm3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}3\ensuremathμm. We find that timing jitter of both narrow (190 nm) and micron-wide strips is about 40 ps at currents where internal detection efficiency \ensuremathη\ensuremath{\eta}\ensuremathη saturates and it is close to our instrumental jitter. We also calculate intrinsic timing jitter in wide strips using the modified time-dependent Ginzburg-Landau equation coupled with a two-temperature model. We find that with increasing width the intrinsic timing jitter increases and the effect is most considerable at currents where a rapid growth of \ensuremathη\ensuremath{\eta}\ensuremathη changes to saturation. We relate it with complicated vortex and antivortex dynamics, which depends on a photon's absorption site across the strip and its width. The model also predicts that at current close to depairing current the intrinsic timing jitter of a wide strip could be about \ensuremathℏ/kBTc\ensuremath{\hbar}/{k}_{B}{T}_{c}\ensuremathℏ/kB​Tc​ (Tc{T}_{c}Tc​ is a critical temperature of superconductor), i.e., the same as for a narrow strip.
Superconducting Single-Photon Detectors (SSPD) invented two decades ago have evolved to a mature technology and have become devices of choice in the advanced applications of quantum optics, such as quantum cryptography and optical quantum computing. In these applications SSPDs are coupled to single-mode fibers and feature almost unity detection efficiency, negligible dark counts, picosecond timing jitter and MHz photon count rate. Meanwhile, there are great many applications requiring coupling to multi-mode fibers or free space. `Classical’ SSPDs with 100-nm-wide superconducting strip and covering area of about 100 µm2 are not suitable for further scaling due to degradation of performance and low fabrication yield. Recently we have demonstrated single-photon counting in micron-wide superconducting bridges and strips. Here we present our approach to the realization of practical photon-counting detectors of large enough area to be efficiently coupled to multi-mode fibers or free space. The detector is either a meander or a spiral of 1-µm-wide strip covering an area of 50x50 µm2. Being operated at 1.7K temperature it demonstrates the saturated detection efficiency (i.e. limited by the absorption in the detector) up to 1550 nm wavelength, about 10 ns dead time and timing jitter in range 50-100 ps.
Superconducting strip single-photon detectors (SSPDs) have emerged as scalable, wide-strip variants of traditional nanowire counterparts. Despite practical advantages including improved optical fill factors and enhanced signal-to-noise ratios the fundamental detection physics governing these micro-scale geometries remains largely unexplored. Here, we investigate the underlying photoresponse of a 20 um-wide tungsten silicide SSPD, demonstrating a slew-rate-corrected timing jitter of 13.2 ps at 532 nm and 20.5 ps at 1550 nm, alongside saturated internal detection efficiency up to 1550 nm. Using focused free-space optical scanning, we reveal that detector timing jitter is strongly influenced by a spatially dependent slew rate between edge and center absorption events. To mitigate this impact, we utilize a parallel superconducting rail architecture to actively redistribute supercurrent. This in-situ tuning minimizes the latency mismatch and mitigates thermally activated intrinsic dark counts, extending the device's ability to operate at higher temperatures. Finally, comparing these dynamics with time-dependent Ginzburg-Landau (TDGL) modeling elucidates the physical origins of the position-dependent photoresponse, highlighting how superconducting rails or specialized readout electronics can mitigate negative impacts on timing jitter.
Superconducting single-photon detector (SSPD) is patterned from 4-nm-thick NbN film deposited on sapphire substrate as a 100-nm-wide strip. Due to its high detection efficiency, low dark counts, and picosecond timing jitter SSPD has become a competitor to the InGaAs avalanche photodiodes at 1550 nm and longer wavelengths. Although the SSPD is operated at liquid helium temperature its efficient single-mode fibre coupling enabled its usage in many applications ranging from single-photon sources research to quantum cryptography. In our strive to increase the detection efficiency at 1550 nm and longer wavelengths we developed and fabricated SSPD with the strip almost twice narrower compared to the standard 100 nm. To increase the voltage response of the device we utilized cascade switching mechanism: we connected 50-nm-wide and 10-μm-long strips in parallel covering the area of 10 μmx10 μm. Absorption of a photon breaks the superconductivity in a strip leading to the bias current redistribution between other strips followed their cascade switching. As the total current of all the strips about is 1 mA by the order of magnitude the response voltage of such an SSPD is several times higher compared to the traditional meander-shaped SSPDs. In middle infrared (about 3 μm wavelength) these devices have the detection efficiency several times higher compared to the traditional SSPDs.
Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ∼ 100 nm . Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons. Compared with the SNSPD covering the same area, the superconducting microstrip single-photon detector (SMSPD) has smaller kinetic inductance, higher working current, and lower requirements in fabrication accuracy, providing potential applications in the development of ultralarge active area detectors. However, the study of SMSPD is still in its infancy, and the realization of its high-performance and practical use remains an open question. This study demonstrates a NbN SMSPD with a nearly saturated system detection efficiency (SDE) of ∼ 92.2 % at a dark count rate of ∼ 200 cps , a polarization sensitivity of ∼ 1.03 , and a minimum timing jitter of ∼ 48 ps at the telecom wavelength of 1550 nm when coupled with a single-mode fiber and operated at 0.84 K. Furthermore, the detector’s SDE is over 70% when operated at a 2.1 K closed-cycle cryocooler.
Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultraviolet frequencies. Despite recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on single-vortex (flux quanta) crossing the width of the nanowire. Our model makes a connection between the dark counts and photon counts near the detection threshold. The finite-difference calculations demonstrate that a change in the bias current distribution as a result of the photon absorption significantly increases the probability of single-vortex crossing even if the vortex potential barrier has not vanished completely. We estimate the instrument response function and show that the timing uncertainty of this vortex tunneling process corresponds to a fundamental limit in timing jitter of the click event. We demonstrate a trade-space between this intrinsic (quantum) timing jitter, quantum efficiency, and dark count rate in TaN, WSi, and NbN superconducting nanowires at different experimental conditions. Our detection model can also explain the experimental observation of exponential decrease in the quantum efficiency of SNSPDs at lower energies. This leads to a pulse-width dependency in the quantum efficiency, and it can be further used as an experimental test to compare across different detection models.