The present work is a continuation of the previous study [1] on the performance of short LDPC codes. We have examined a sample of (128,256) different LDPC codes and explored their bit error-rate curves as a function of Tanner graph properties. It was found that certain graph characteristics correlate with LDPC code performance and can help to distinguish LDPC codes with a good decoding threshold (less or equal 3.5 dB) from others. In this work, we investigate a slope of bit error- rate curves that along with a decoding threshold provides an information on code performance.
The present work is a continuation of the previous study [1] on the performance of short LDPC codes. We have examined a sample of (128,256) different LDPC codes and explored their bit error-rate curves as a function of Tanner graph properties. It was found that certain graph characteristics correlate with LDPC code performance and can help to distinguish LDPC codes with a good decoding threshold (less or equal 3.5 dB) from others. In this work, we investigate a slope of bit error- rate curves that along with a decoding threshold provides an information on code performance.
This paper presents the research on LDPC codes performance depending on several Tanner graph properties. We have simulated 2250 (128,256) different LDPC codes in FPGA and explored their waterfall region as a function of the graph characteristics. These characteristics are different graph centralization measures and the second smallest Laplacian eigenvalue. We have received numerical values that distinguish LDPC codes with a good decoding threshold (less or equal 3.5 dB) from others. In addition, we developed a polynomial regression model that accurately predicts the LDPC decoding threshold with a coefficient of determination equal to 0.87 and RMSE equal 0.16 dB.
Low density parity check codes (LDPC) are known to perform very well under iterative decoding. However, these codes also exhibit a change in the slope of the bit error rate (BER) vs. signal to noise ratio (SNR) curve in the very low BER region. In our earlier work using hardware emulation in this deep BER regime we argue that this behavior can be attributed to specific structures within the Tanner graph associated with an LDPC code, called absorbing sets. In this paper we provide a detailed theoretical analysis of absorbing sets for array-based LDPC codes Cp.gamma. Specifically, we identify and enumerate all the smallest absorbing sets for these array-based LDPC codes with gamma = 2,3,4 with standard parity check matrix. Experiments carried out on the emulation platform show excellent agreement with our theoretical results.
Performance analysis for iterative decoders: In Chapter 7, we discuss the behavior of LDPC codes under iterative erasure decoding. When the blocklength goes to infinity, for many LDPC codes, the symbol error probability exhibits a so-called threshold phenomenon that is, there exists a certain channel erasure probability below which error-free communication is possible, while this is not guaranteed above it. We discuss how to compute this threshold for ensembles of LDPC codes on memoryless erasure channels. In the finite-length setting, one may observe a flattening of the symbol error rate curve owing to stopping sets – specific structures in the code’s bipartite graph. Knowing their number and size allows predicting this so-called error floor. Based on our findings, we discuss how to design good LDPC for memoryless erasure channels with extension to channels with memory.
In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues. \n \nFirstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension. \n \nSecondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process. \n \nLastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity.
LDPC codes are finding increasing use in applications requiring reliable and highly efficient information transfer over bandwidth. An LDPC code is defined by a sparse parity-check matrix and can be described by a bipartite graph called Tanner graph. Loops in Tanner graph prevent the sum-product algorithm from converging. Further, loops, especially short loops, degrade the performance of LDPC decoder, because they affect the independence of the extrinsic information exchanged in the iterative decoding. This paper, by graph theory, deduces cut-node tree graph of LDPC code, and depicts it with matrix. On the basis of tree matrix algorithm, whole depictions of loops can be figured out, providing of foundation for further research of relations between loops and LDPC codes’ performance.
One of the most significant impediments to the use of LDPC codes in many communication and storage systems is the error-rate floor phenomenon associated with their iterative decoders. The error floor has been attributed to certain subgraphs of an LDPC code's Tanner graph induced by so-called trapping sets. We show in this paper that once we identify the trapping sets of an LDPC code of interest, a sum-product algorithm (SPA) decoder can be custom-designed to yield floors that are orders of magnitude lower than floors of the the conventional SPA decoder. We present three classes of such decoders: (1) a bi-mode decoder, (2) a bit-pinning decoder which utilizes one or more outer algebraic codes, and (3) three generalized-LDPC decoders. We demonstrate the effectiveness of these decoders for two codes, the rate-1/2 (2640,1320) Margulis code which is notorious for its floors and a rate-0.3 (640,192) quasi-cyclic code which has been devised for this study. Although the paper focuses on these two codes, the decoder design techniques presented are fully generalizable to any LDPC code.