Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Microprocessors and Microsystems

Reconfigurable Superconducting FFT Processor Using Bit-Slice Block Share Processing Unit

S. Narendran, J. Selvakumar, K. Vijayan

Published Oct 7, 2020• 13 citations
Publisher
DOI
10.1016/j.micpro.2020.103297

Related papers

Demonstration of an 8-point 7-bit SFQ-based FFT processor

裕希 山梨, 信行 吉川, Nobuyuki Yoshikawa

IEICE Technical Report; IEICE Tech. Rep.•Aug 2, 2019•0 citations

Bit-Slice Butterfly Processing Units for 64-Point RSFQ FFT Processors

Guang-Ming Tang, Pei-Yao Qu, Xiangyu Zheng +4 more

In this article, 8-bit bit-slice butterfly processing units (BPUs) are proposed for 64-point rapid single-flux-quantum (RSFQ) fast Fourier transform processors. The BPUs are based on radix-2, mixed-radix, and split-radix algorithms, respectively. Unlike the previously developed bit-serial RSFQ BPUs, the proposed bit-slice BPUs continuously process 64-point data divided into eight slices of eight points each in order to reduce the hardware cost. The BPUs use synchronous concurrent-flow clocking and they can be extended to any n2-point processing.

IEEE Transactions on Applied Superconductivity•Jul 30, 2019•12 citations

Superconducting digital signal processor

Irina Kataeva

•Jan 1, 2005•1 citation

High-Speed Test of a Radix-2 Butterfly Processing Element for Fast Fourier Transforms Using SFQ Circuits

Fumishige Miyaoka, Toshiki Kainuma, Yasuhiro Shimamura +2 more

The Fast Fourier Transform (FFT) is extensively used in image processing, wireless communication, and other applications. Some applications that involve very complicated, real-time FFT processing require specialized hardware for performing high-speed FFT processing. We have been developing high-speed FFT processors based on single flux quantum (SFQ) circuit technology. In this study, we developed a butterfly processing element for FFT processors that uses SFQ circuits. The butterfly processing element consists of complex number adders, subtractors, and multipliers. The circuit structure was modified compared to that of previous SFQ FFT processors to reduce latency. Several buffer circuits were inserted in the multipliers to compensate for timing jitter accumulation and discrepancies due to signal propagation delay. We designed and implemented a four-bit bit-serial butterfly processing element that contains 5763 Josephson junctions using the ISTEC Nb 2.5-kA/cm2standard 2 process and the CONNECT cell library. Correct operation of the butterfly processing unit was experimentally confirmed at a clock frequency of 25 GHz.

IEEE Transactions on Applied Superconductivity•Dec 23, 2010•7 citations

Superconducting On-chip Fourier Transform Spectrometer

R. Basu Thakur, Nikita S. Klimovich, P. K. Day +4 more

arXiv:1909.02100•Journal of Low Temperature Physics•Jun 22, 2020•9 citations

Superconductive Analog Electronics For Signal Processing Applications

J.B. Green

Springer eBooks•Jan 1, 1991•0 citations
In this article, 8-bit bit-slice butterfly processing units (BPUs) are proposed for 64-point rapid single-flux-quantum (RSFQ) fast Fourier transform processors. The BPUs are based on radix-2, mixed-radix, and split-radix algorithms, respectively. Unlike the previously developed bit-serial RSFQ BPUs, the proposed bit-slice BPUs continuously process 64-point data divided into eight slices of eight points each in order to reduce the hardware cost. The BPUs use synchronous concurrent-flow clocking and they can be extended to any n2-point processing.
The Fast Fourier Transform (FFT) is extensively used in image processing, wireless communication, and other applications. Some applications that involve very complicated, real-time FFT processing require specialized hardware for performing high-speed FFT processing. We have been developing high-speed FFT processors based on single flux quantum (SFQ) circuit technology. In this study, we developed a butterfly processing element for FFT processors that uses SFQ circuits. The butterfly processing element consists of complex number adders, subtractors, and multipliers. The circuit structure was modified compared to that of previous SFQ FFT processors to reduce latency. Several buffer circuits were inserted in the multipliers to compensate for timing jitter accumulation and discrepancies due to signal propagation delay. We designed and implemented a four-bit bit-serial butterfly processing element that contains 5763 Josephson junctions using the ISTEC Nb 2.5-kA/cm2standard 2 process and the CONNECT cell library. Correct operation of the butterfly processing unit was experimentally confirmed at a clock frequency of 25 GHz.