Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Circuits and Systems proceedings

A New VLSI Architecture of Next-Generation QC-LDPC Decoder for 5G New-Radio Wireless-Communication Standard

Anuj Verma, Rahul Shrestha

Published Sep 29, 2020• 21 citations
Publisher

Abstract

In this paper, we present a new microarchitecture of low-density parity-check (LDPC) decoder compliant to the specifications of 5G new-radio (NR) wireless-communication standard. This work suggests a fully-parallel VLSI architecture for this decoder to achieve high throughput. The digital architecture of internal modules as well as system-level design of the LDPC decoder are presented here. The comprehensive bit-error-rate (BER) performance analyses of our LDPC decoder has been performed in additive-white Gaussian-noise (AWGN) channel environment for various number of decoding iterations and bit-quantization. It delivers a BER of 10-6at 1 dB of Eb/N0while decoding for 10 iterations with 7-bits quantization. In addition, FPGA implementation and post-route simulation of the proposed LDPC decoder are carried out that can decode an encoded LDPC code of 26112 code-length for 1/3 code-rate. Our decoder has achieved a throughput of 2.9 Gbps while operating at a clock frequency of 102 MHz. These implementation results are compared with the reported works where our design delivered 20× better throughput compared to the state-of-the-art LDPC decoders.

DOI
10.1109/iscas45731.2020.9181188

Related papers

An Efficient QC-LDPC Decoder Architecture for 5G-NR Wireless Communication Standards Targeting FPGA

Bilal Mejmaa, Malika Alami Marktani, Ismail Akharraz +1 more

This novel research introduces a game-changing architecture design for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoders in Fifth-Generation New-Radio (5G-NR) wireless communications, specifically designed to meet precise specifications and leveraging the layered Min-Sum (MS) algorithm. Our innovative approach presents a fully parallel architecture that is precisely engineered to cater to the demanding high-throughput requirements of enhanced Mobile Broadband (eMBB) applications. To ensure smooth computation in the MS algorithm, we use the Sub-Optimal Low-Latency (SOLL) technique to optimize the critical check node process. Thus, our design has the potential to greatly benefit certain Ultra-Reliable Low-Latency Communications (URLLC) scenarios. We conducted precise Bit Error Rate (BER) performance analysis on our LDPC decoder using a Hardware Description Language (HDL) Co-Simulation (MATLAB/Simulink/ModelSim) for two codeword rates (2/3 and 1/3), simulating the challenging Additive White Gaussian Noise (AWGN) channel environment.

Computers•Aug 14, 2024•12 citations

A New Partially-Parallel VLSI-Architecture of Quasi-Cyclic LDPC Decoder for 5G New-Radio

Anuj Verma, Rahul Shrestha

This paper presents partially-parallel low-density parity-check (LDPC) decoder architecture for binary-input additive-white Gaussian-noise (BIAWGN) channel in 5G new-radio cellular-communication technology based on layered min-sum decoding algorithm. This architecture exploits the iterative decomposition of check-node and variable-node combined-processing unit which leads to area optimization and lower hardware complexity. The proposed VLSI architecture of LDPC decoder processes quasi-cyclic LDPC encoded information which is received as log-likelihood ratios (LLRs) from soft demodulator at the receiver side. It achieves the adequate bit-error-rate (BER) of $10 -^{6}$ between 2 to 4 dB of bit-energy to noise-power-spectral-density $(\mathrm{E}_{b}/ \mathrm{N}_{0})$ with 10 decoding iterations for various code rates like 1/3, 2/5, 1/2, 2/3, 3/4, 5/6, and 8/9. The VLSI architecture of 5G new-radio LDPC decoder has been field-programmable logic-array (FPGA) prototyped and its implementation results are compared with state-of the-art designs where the proposed LDPC decoder shows lower hardware utilization up to 87%. To the best of our knowledge, this is the first VLSI-architecture of LDPC decoder reported for 5G new-radio compliant to the specifications of enhanced mobile broadband (eMBB).

International Conference on VLSI Design•Jan 1, 2020•19 citations

Hardware-Efficient and High-Throughput LLRC Segregation Based Binary QC-LDPC Decoding Algorithm and Architecture

Anuj Verma, Rahul Shrestha

This brief proposes hardware-friendly QC-LDPC decoding algorithm with layered scheduling based on new logarithmic-likelihood-ratio compound (LLRC) segregation technique. Subsequently, we present hardware-efficient QC-LDPC decoder-architecture based on the proposed algorithm and additional architectural optimizations. This decoder has been designed based on the 5G-NR specifications, supporting code-lengths and code-rates in the ranges of 26112-10368 bits and 1/3-8/9, respectively. Performance analysis has shown that suggested LLRC-segregation based decoding algorithm delivers adequate FER of 10-5between 1 to 6.5 dB of SNR range. Furthermore, proposed QC-LDPC decoder is post-route simulated and implemented on the FPGA platform. It operates at a maximum clock frequency of 135 MHz and delivers a peak throughput of 11.02 Gbps. Eventually, comparison with relevant works shows that our decoder delivers 2.2× higher throughput and 8.3× better hardware-efficiency than the state-of-the-art implementations.

IEEE Transactions on Circuits & Systems II Express Briefs•Apr 9, 2021•11 citations

A Comparative Study on High Performance of LDPC Decoders for 5G Applications

Y. Sugandhi Naidu, P. Vijaya Lakshmi

5G technology new radios (5G NR) require high-speed decoders that operate on highly irregular low-density parity-check (LDPC) codes.LDPC decoders have gained significant attention due to their excellent error correction performance.This study evaluates on different algorithms and scheduling techniques used for LDPC decoders.The analysis highlights that Min-Sum-based approaches can reduce the computational complexity compared to the basic sum-product algorithm, while the normalized and extended Min-Sum algorithms provide a better trade-off owing to their accurate value assumptions.Furthermore, different scheduling methods are implied for MS to improve speed and reduce latency.This study provides a comparative analysis of the algorithms and architectures that yield high throughputs without compromising performance efficiency.The LNMS algorithm with a data-level rescheduling technique resolves data dependency issues.This resolves the complexity of CN and VN and improves the throughput, making it suitable for 5G NR applications.The decoded throughput achieved with this scheduling is 7.0 Gbps.This throughput is achieved by maintaining the standard parameters and worst case parameters, such as four/eight iterations, BG1, and a code rate of 0.8/0.5.The evaluated architectures are implemented on Field Programmable Gate Array (FPGA) devices.This study aids in selecting the optimal architecture and scheduling techniques for LDPC decoders by considering various performance standards to deploy wireless networks in 5G and beyond.

Journal of Engineering Science and Technology Review•Jun 1, 2026•0 citations

Flexible High Throughput QC-LDPC Decoder With Perfect Pipeline Conflicts Resolution and Efficient Hardware Utilization

Vladimir L. Petrović, Milos M. Markovic, Dragomir El Mezeni +2 more

Modern communication standards, such as 5G new radio (5G NR), require a high speed decoder for highly irregular quasi-cyclic low density parity check (QC-LDPC) codes. A widely used approach in QC-LDPC decoders is a layered decoding schedule which processes the parity check matrix in parts, thus providing faster convergence. However, pipelined layered decoding architecture suffers from data hazards that reduce the throughput. This paper presents a novel architecture, which can facilitate any QC-LDPC decoding without stall cycles caused by pipeline hazards. The decoder conveniently incorporates both the layered and the flooding schedules in cases when hazards occur. The paper also presents the genetic algorithm based optimization of the decoding schedule for better signal-to-noise ratio (SNR) performance. The proposed architecture enables insertion of a large number of pipeline stages, thus providing high operating frequency. As a case study, the FPGA implementation for WiMAX, DVB-S2X, and 5G NR provided coded throughput of up to 1.77 Gbps, 4.32 Gbps, and 4.92 Gbps at 10 iterations, respectively. The results show a strong throughput increase of 30%-109% compared with the conventional layered decoder for 5G NR for the same SNR performance. The decoder provides highly efficient utilization of resources when compared with the state-of-the-art solutions.

IEEE Transactions on Circuits and Systems I Regular Papers•Aug 27, 2020•69 citations

Performance Simulation of a Layered QC-LDPC Decoder for URLLC Applications

Bilal Mejmaa, Chakir Aqil, Ismail Akharraz +1 more

This research investigates the simulation performance of a layered Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoder intended for Ultra-Reliable Low-Latency Communication (URLLC) applications in 5G New-Radio (NR) standards. The proposed work focuses on short block-length QC-LDPC codes (280,176) to meet the dual challenge of achieving ultra-low latency (<1ms) while maintaining high reliability. LDPC codes have traditionally excelled at longer code lengths; this study demonstrates the effectiveness of LDPC codes in short-length contexts through architectural optimization utilizing a layered decoding approach, which provides improved convergence speed and reduced latency compared to traditional flooding techniques. The baseline QC-LDPC decoder performs better in terms of Bit Error Rate (BER) and Block Error Rate (BLER) with only 7 iterations. For a target BLER of 10−2, the decoder outperforms reference shorter codes (K40, K64) with an Eb/No gain of up to 0.9 dB.

•Jul 1, 2026•0 citations
In this paper, we present a new microarchitecture of low-density parity-check (LDPC) decoder compliant to the specifications of 5G new-radio (NR) wireless-communication standard. This work suggests a fully-parallel VLSI architecture for this decoder to achieve high throughput. The digital architecture of internal modules as well as system-level design of the LDPC decoder are presented here. The comprehensive bit-error-rate (BER) performance analyses of our LDPC decoder has been performed in additive-white Gaussian-noise (AWGN) channel environment for various number of decoding iterations and bit-quantization. It delivers a BER of 10-6at 1 dB of Eb/N0while decoding for 10 iterations with 7-bits quantization. In addition, FPGA implementation and post-route simulation of the proposed LDPC decoder are carried out that can decode an encoded LDPC code of 26112 code-length for 1/3 code-rate. Our decoder has achieved a throughput of 2.9 Gbps while operating at a clock frequency of 102 MHz. These implementation results are compared with the reported works where our design delivered 20× better throughput compared to the state-of-the-art LDPC decoders.
This novel research introduces a game-changing architecture design for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoders in Fifth-Generation New-Radio (5G-NR) wireless communications, specifically designed to meet precise specifications and leveraging the layered Min-Sum (MS) algorithm. Our innovative approach presents a fully parallel architecture that is precisely engineered to cater to the demanding high-throughput requirements of enhanced Mobile Broadband (eMBB) applications. To ensure smooth computation in the MS algorithm, we use the Sub-Optimal Low-Latency (SOLL) technique to optimize the critical check node process. Thus, our design has the potential to greatly benefit certain Ultra-Reliable Low-Latency Communications (URLLC) scenarios. We conducted precise Bit Error Rate (BER) performance analysis on our LDPC decoder using a Hardware Description Language (HDL) Co-Simulation (MATLAB/Simulink/ModelSim) for two codeword rates (2/3 and 1/3), simulating the challenging Additive White Gaussian Noise (AWGN) channel environment.
This paper presents partially-parallel low-density parity-check (LDPC) decoder architecture for binary-input additive-white Gaussian-noise (BIAWGN) channel in 5G new-radio cellular-communication technology based on layered min-sum decoding algorithm. This architecture exploits the iterative decomposition of check-node and variable-node combined-processing unit which leads to area optimization and lower hardware complexity. The proposed VLSI architecture of LDPC decoder processes quasi-cyclic LDPC encoded information which is received as log-likelihood ratios (LLRs) from soft demodulator at the receiver side. It achieves the adequate bit-error-rate (BER) of 10−610 -^{6}10−6 between 2 to 4 dB of bit-energy to noise-power-spectral-density (Eb/N0)(\mathrm{E}_{b}/ \mathrm{N}_{0})(Eb​/N0​) with 10 decoding iterations for various code rates like 1/3, 2/5, 1/2, 2/3, 3/4, 5/6, and 8/9. The VLSI architecture of 5G new-radio LDPC decoder has been field-programmable logic-array (FPGA) prototyped and its implementation results are compared with state-of the-art designs where the proposed LDPC decoder shows lower hardware utilization up to 87%. To the best of our knowledge, this is the first VLSI-architecture of LDPC decoder reported for 5G new-radio compliant to the specifications of enhanced mobile broadband (eMBB).
This brief proposes hardware-friendly QC-LDPC decoding algorithm with layered scheduling based on new logarithmic-likelihood-ratio compound (LLRC) segregation technique. Subsequently, we present hardware-efficient QC-LDPC decoder-architecture based on the proposed algorithm and additional architectural optimizations. This decoder has been designed based on the 5G-NR specifications, supporting code-lengths and code-rates in the ranges of 26112-10368 bits and 1/3-8/9, respectively. Performance analysis has shown that suggested LLRC-segregation based decoding algorithm delivers adequate FER of 10-5between 1 to 6.5 dB of SNR range. Furthermore, proposed QC-LDPC decoder is post-route simulated and implemented on the FPGA platform. It operates at a maximum clock frequency of 135 MHz and delivers a peak throughput of 11.02 Gbps. Eventually, comparison with relevant works shows that our decoder delivers 2.2× higher throughput and 8.3× better hardware-efficiency than the state-of-the-art implementations.
5G technology new radios (5G NR) require high-speed decoders that operate on highly irregular low-density parity-check (LDPC) codes.LDPC decoders have gained significant attention due to their excellent error correction performance.This study evaluates on different algorithms and scheduling techniques used for LDPC decoders.The analysis highlights that Min-Sum-based approaches can reduce the computational complexity compared to the basic sum-product algorithm, while the normalized and extended Min-Sum algorithms provide a better trade-off owing to their accurate value assumptions.Furthermore, different scheduling methods are implied for MS to improve speed and reduce latency.This study provides a comparative analysis of the algorithms and architectures that yield high throughputs without compromising performance efficiency.The LNMS algorithm with a data-level rescheduling technique resolves data dependency issues.This resolves the complexity of CN and VN and improves the throughput, making it suitable for 5G NR applications.The decoded throughput achieved with this scheduling is 7.0 Gbps.This throughput is achieved by maintaining the standard parameters and worst case parameters, such as four/eight iterations, BG1, and a code rate of 0.8/0.5.The evaluated architectures are implemented on Field Programmable Gate Array (FPGA) devices.This study aids in selecting the optimal architecture and scheduling techniques for LDPC decoders by considering various performance standards to deploy wireless networks in 5G and beyond.
Modern communication standards, such as 5G new radio (5G NR), require a high speed decoder for highly irregular quasi-cyclic low density parity check (QC-LDPC) codes. A widely used approach in QC-LDPC decoders is a layered decoding schedule which processes the parity check matrix in parts, thus providing faster convergence. However, pipelined layered decoding architecture suffers from data hazards that reduce the throughput. This paper presents a novel architecture, which can facilitate any QC-LDPC decoding without stall cycles caused by pipeline hazards. The decoder conveniently incorporates both the layered and the flooding schedules in cases when hazards occur. The paper also presents the genetic algorithm based optimization of the decoding schedule for better signal-to-noise ratio (SNR) performance. The proposed architecture enables insertion of a large number of pipeline stages, thus providing high operating frequency. As a case study, the FPGA implementation for WiMAX, DVB-S2X, and 5G NR provided coded throughput of up to 1.77 Gbps, 4.32 Gbps, and 4.92 Gbps at 10 iterations, respectively. The results show a strong throughput increase of 30%-109% compared with the conventional layered decoder for 5G NR for the same SNR performance. The decoder provides highly efficient utilization of resources when compared with the state-of-the-art solutions.
This research investigates the simulation performance of a layered Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoder intended for Ultra-Reliable Low-Latency Communication (URLLC) applications in 5G New-Radio (NR) standards. The proposed work focuses on short block-length QC-LDPC codes (280,176) to meet the dual challenge of achieving ultra-low latency (<1ms) while maintaining high reliability. LDPC codes have traditionally excelled at longer code lengths; this study demonstrates the effectiveness of LDPC codes in short-length contexts through architectural optimization utilizing a layered decoding approach, which provides improved convergence speed and reduced latency compared to traditional flooding techniques. The baseline QC-LDPC decoder performs better in terms of Bit Error Rate (BER) and Block Error Rate (BLER) with only 7 iterations. For a target BLER of 10−2, the decoder outperforms reference shorter codes (K40, K64) with an Eb/No gain of up to 0.9 dB.