Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Site-controlled generation of tin-vacancy centers in diamond via shallow ion implantation and diamond overgrowth

Alison E. Rugar, Haiyu Lu, Constantin Dory, Shuo Sun, Patrick J. McQuade, Zhi‐Xun Shen, Nicholas A. Melosh, Jelena Vučković

Published Jan 1, 2020• 0 citations
Publisher

Abstract

We generate tin-vacancy (SnV-) centers in patterned arrays by shallowly implanting Sn ions into diamond through an implantation mask and subsequently growing diamond. This method eliminates extraneous emission lines present in vacuum-annealed SnV- samples.
DOI
10.1364/cleo_qels.2020.ftu3d.3

Related papers

Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth

Alison E. Rugar, Haiyu Lu, Constantin Dory +5 more

Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.

arXiv:1910.14165•Nano Letters•Feb 7, 2020•71 citations

Quantum Photonics with SnV Centers in Diamond

Shahriar Aghaeimeibodi, Jelena Vučković

In this presentation, we will discuss our recent efforts on realizing a quantum photonic platform for diamond color centers. In particular, we demonstrate integration of tin-vacancy (SnV) spin qubits in diamond to optical waveguides, cavities, and nanopillars. We show that SnV centers created using our recent technique based on shallow ion implantation and overgrowth maintain their quality when placed in nanostructures.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 11, 2021•2 citations

Fabrication of Tin vacancy centers in nanodiamonds

Hideaki Takashima, Konosuke Shimazaki, Abe Hiroshi +2 more

Nanodiamonds with color centers have recently become a focus of photonic quantum information technologies. Among the various vacancies in diamonds, Tin vacancy (SnV) centers have promising properties[3], such as high brightness, high emission efficiency (60%) from a zero-phonon line (ZPL) at about 620 nm, lifetime-limited linewidths, and a long coherence time of the electronic spin. A reported method for fabricating nanodiamonds, including SnV centers, is the synthesis by microwave plasma chemical vapor deposition[4]. In this method, inorganic compounds were used to introduce a layer of oxides and chlorides that serve Sn ions. However, this method would be difficult to precisely control both the size of the nanodiamonds and the number of defect centers. Here, we report an alternative approach for creating SnV centers in nanodiamonds using ion implantation. We use type-Ib diamond monocrystalline suspension (MSY 0.05, purchased from Microdiamant). Small amounts of the suspension are spin-coated several times on substrates. Sn ions are implanted into the samples with an energy of 800 KeV and ion fluence of 1014 ions/cm2. We then anneal the implanted samples in a high vacuum for about 20 hours at 1200oC. After annealing, the samples are heated at about 500 degrees to remove the sp2 carbon layer on the surface. Finally, the nanodiamonds are transferred to silica substrates. We use a confocal microscope system for the optical measurement. A continuous-wave laser (λ=520 nm) is used to excite the SnV centers in the nanodiamonds. The laser's excitation power is about 10 mW. The laser beam is focused on the nanodiamonds with an objective lens with a numerical aperture of 0.95. The samples are scanned at a step size of 200 nm using a three-axis piezo actuator. The fluorescence is collected with the same objective lens and measured by a single-photon counting module and a spectrometer.

•Nov 19, 2024•0 citations

Multiple Tin-Vacancy Centers in Diamond with Nearly Identical Photon Frequency and Linewidth

Yasuyuki Narita, Peng Wang, Keita Ikeda +6 more

Tin-vacancy (Sn-$V$) centers in diamond, which possess good optical and spin properties, are a promising system for constructing quantum network nodes. Tin atoms are heavy, though, and generating photons with identical wavelength and linewidth from multiple Sn-$V$ emitters is challenging, due to the strain in the diamond host material. This study shows that multiple Sn-$V$ centers, formed deep within bulk diamond by ion implantation and high-temperature annealing, emit nearly identical photons. This leads to two-photon interference from distant centers, an important step toward building quantum network nodes.

Physical Review Applied•Feb 23, 2023•24 citations

Tin-Vacancy Quantum Emitters in Diamond

Takayuki Iwasaki, Yoshiyuki Miyamoto, Takashi Taniguchi +4 more

Tin-vacancy ($\mathrm{Sn}\text{\ensuremath{-}}V$) color centers were created in diamond via ion implantation and subsequent high-temperature annealing up to $2100\text{ }\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ at 7.7 GPa. The first-principles calculation suggested that a large atom of tin can be incorporated into a diamond lattice with a split-vacancy configuration, in which a tin atom sits on an interstitial site with two neighboring vacancies. The $\mathrm{Sn}\text{\ensuremath{-}}V$ center showed a sharp zero phonon line at 619 nm at room temperature. This line split into four peaks at cryogenic temperatures, with a larger ground state splitting ($\ensuremath{\sim}850\text{ }\text{ }\mathrm{GHz}$) than that of color centers based on other group-IV elements, i.e., silicon-vacancy ($\mathrm{Si}\text{\ensuremath{-}}V$) and germanium-vacancy ($\mathrm{Ge}\text{\ensuremath{-}}V$) centers. The excited state lifetime was estimated, via Hanbury Brown--Twiss interferometry measurements on single $\mathrm{Sn}\text{\ensuremath{-}}V$ quantum emitters, to be $\ensuremath{\sim}5\text{ }\text{ }\mathrm{ns}$. The order of the experimentally obtained optical transition energies, compared with those of $\mathrm{Si}\text{\ensuremath{-}}V$ and $\mathrm{Ge}\text{\ensuremath{-}}V$ centers, was in good agreement with the theoretical calculations.

arXiv:1708.03576•Physical Review Letters•Dec 22, 2017•337 citations

Array of bright silicon-vacancy centers in diamond fabricated by low-energy focused ion beam implantation

Syuto Tamura, Godai Koike, Akira Komatsubara +12 more

Among promising color centers for single-photon sources in diamond, the negatively charged silicon-vacancy (SiV − ) has 70% of its emission to the zero-phonon line (ZPL), in contrast to the negatively charged nitrogen vacancy (NV − ), which has a broad spectrum. Fabricating single centers of useful defect complexes with high yield and excellent grown-in defect properties by ion implantation has proven to be challenging. We have fabricated bright single SiV − centers by 60-keV focused ion beam implantation and subsequent annealing at 1000 °C with high positioning accuracy and a high yield of 15%.

Applied Physics Express•Oct 15, 2014•89 citations
Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.
Nanodiamonds with color centers have recently become a focus of photonic quantum information technologies. Among the various vacancies in diamonds, Tin vacancy (SnV) centers have promising properties[3], such as high brightness, high emission efficiency (60%) from a zero-phonon line (ZPL) at about 620 nm, lifetime-limited linewidths, and a long coherence time of the electronic spin. A reported method for fabricating nanodiamonds, including SnV centers, is the synthesis by microwave plasma chemical vapor deposition[4]. In this method, inorganic compounds were used to introduce a layer of oxides and chlorides that serve Sn ions. However, this method would be difficult to precisely control both the size of the nanodiamonds and the number of defect centers. Here, we report an alternative approach for creating SnV centers in nanodiamonds using ion implantation. We use type-Ib diamond monocrystalline suspension (MSY 0.05, purchased from Microdiamant). Small amounts of the suspension are spin-coated several times on substrates. Sn ions are implanted into the samples with an energy of 800 KeV and ion fluence of 1014 ions/cm2. We then anneal the implanted samples in a high vacuum for about 20 hours at 1200oC. After annealing, the samples are heated at about 500 degrees to remove the sp2 carbon layer on the surface. Finally, the nanodiamonds are transferred to silica substrates. We use a confocal microscope system for the optical measurement. A continuous-wave laser (λ=520 nm) is used to excite the SnV centers in the nanodiamonds. The laser's excitation power is about 10 mW. The laser beam is focused on the nanodiamonds with an objective lens with a numerical aperture of 0.95. The samples are scanned at a step size of 200 nm using a three-axis piezo actuator. The fluorescence is collected with the same objective lens and measured by a single-photon counting module and a spectrometer.
Tin-vacancy (Sn-VVV) centers in diamond, which possess good optical and spin properties, are a promising system for constructing quantum network nodes. Tin atoms are heavy, though, and generating photons with identical wavelength and linewidth from multiple Sn-VVV emitters is challenging, due to the strain in the diamond host material. This study shows that multiple Sn-VVV centers, formed deep within bulk diamond by ion implantation and high-temperature annealing, emit nearly identical photons. This leads to two-photon interference from distant centers, an important step toward building quantum network nodes.
Tin-vacancy ($\mathrm{Sn}\text{\ensuremath{-}}V$) color centers were created in diamond via ion implantation and subsequent high-temperature annealing up to $2100\text{ }\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ at 7.7 GPa. The first-principles calculation suggested that a large atom of tin can be incorporated into a diamond lattice with a split-vacancy configuration, in which a tin atom sits on an interstitial site with two neighboring vacancies. The $\mathrm{Sn}\text{\ensuremath{-}}V$ center showed a sharp zero phonon line at 619 nm at room temperature. This line split into four peaks at cryogenic temperatures, with a larger ground state splitting ($\ensuremath{\sim}850\text{ }\text{ }\mathrm{GHz}$) than that of color centers based on other group-IV elements, i.e., silicon-vacancy ($\mathrm{Si}\text{\ensuremath{-}}V$) and germanium-vacancy ($\mathrm{Ge}\text{\ensuremath{-}}V$) centers. The excited state lifetime was estimated, via Hanbury Brown--Twiss interferometry measurements on single $\mathrm{Sn}\text{\ensuremath{-}}V$ quantum emitters, to be $\ensuremath{\sim}5\text{ }\text{ }\mathrm{ns}$. The order of the experimentally obtained optical transition energies, compared with those of $\mathrm{Si}\text{\ensuremath{-}}V$ and $\mathrm{Ge}\text{\ensuremath{-}}V$ centers, was in good agreement with the theoretical calculations.
Among promising color centers for single-photon sources in diamond, the negatively charged silicon-vacancy (SiV − ) has 70% of its emission to the zero-phonon line (ZPL), in contrast to the negatively charged nitrogen vacancy (NV − ), which has a broad spectrum. Fabricating single centers of useful defect complexes with high yield and excellent grown-in defect properties by ion implantation has proven to be challenging. We have fabricated bright single SiV − centers by 60-keV focused ion beam implantation and subsequent annealing at 1000 °C with high positioning accuracy and a high yield of 15%.