Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Russian Automation Conference (RusAutoCon)

Method of Modeling Quantum Computations Using a Hardware Accelerator

Sergey M. Gushanskiy, Viktor Potapov, Пуховский Валерий Николаевич

Published Sep 1, 2020• 1 citation
Publisher

Abstract

During the study, software techniques for optimizing the quantum computer model were considered. The main goal of techniques that increase the efficiency of modeling is to reduce the amount of data that must be processed when modeling quantum gates. The most suitable algorithm for implementing a hardware accelerator was considered and modeled in the experimental part. Algorithms of graph theory or decision diagrams are not very suitable for this task, since their implementation will require the implementation of tensor matrix products, which is more convenient to do on a software simulator. It is also worth noting the increasingly growing interest in modeling quantum computing on special hardware, such as video cards or supercomputers. Therefore, the technique presented in the work is relevant, because it combines software solutions in the field of optimization over the past few years and recently studied methods for modeling quantum computing.

DOI
10.1109/rusautocon49822.2020.9208110

Related papers

Developing a Hardware Approach to Simulating Quantum Computing Using an Optimization Algorithm

Пуховский Валерий Николаевич, Sergey M. Gushanskiy, Viktor Potapov

In the past few decades, there has been an acute problem of creating a quantum computer that uses quantum mechanical effects such as quantum parallelism and quantum entanglement for computations. Using these mechanisms, the quantum computer is able to solve some of the NP-class problems in polynomial time. A hardware approach to modeling quantum computing is considered, and a general mathematical model of the operation of a quantum computer is described, and a technique for mathematical modeling of quantum computing is presented. At the stage of consideration of the method of mathematical modeling, the most resource-intensive parts of the model are indicated. Also, issues related to data parallelization on a hardware accelerator, which are planned to be used to simulate quantum computing, were considered, and algorithms for the operation of this type of accelerator were given. A more compact data format is proposed, which is recommended to be used when implementing the accelerator. Using the proposed format, it is possible to reduce the resources spent on elementary arithmetic operations. The possibility of introducing an optimization algorithm to minimize the time spent in computations, as well as to speed up the execution of quantum algorithms in simulators of a quantum computer at the stage of the effect of quantum gates on the quantum register model, is proposed. The results of the optimization algorithm and its comparison with the classical mathematical approach using a software model are presented.

Panhellenic Conference on Informatics•Nov 26, 2021•1 citation

DEVELOPMENT OF METHODS OF OPTIMIZATION AND PARALLELIZATION OF COMPUTATIONAL PROCESSES IN QUANTUM ACCELERATORS

S. M. Gushanskiy, Viktor Potapov, Божич Владимир Иванович

Recently, there has been a rapid increase in interest in quantum computers. Their work isbased on the use of quantum-mechanical phenomena such as superposition and entanglement forcomputing to transform input data into outputs that can actually provide effective performance3–4 orders of magnitude higher than any modern computing devices, which will allow solving theabove and others. tasks in real- and accelerated-time scale. This article is devoted to solving theproblem of research and development of methods for optimizing quantum computing within theframework of the application of quantum accelerators. A block diagram of a hardware acceleratoris proposed to increase the performance of simulated quantum computing. The development of thestructural diagram of the communication module of the hardware accelerator and the softwaremodel was carried out. The relevance of these studies lies in mathematical and software modelingand implementation of correction codes for correcting several types of quantum errors in the developmentand implementation of quantum algorithms for solving classes of problems of a classicalnature. The scientific novelty of this direction is expressed in the elimination of one of the disadvantagesof the quantum computational process. The scientific novelty of this area is primarilyexpressed in the constant updating and supplementation of the field of quantum research in anumber of areas, and the computer simulation of quantum physical phenomena and features ispoorly covered in the world.

Известия Южного федерального университета. Технические науки•Aug 8, 2021•0 citations

Development and Research of a Quantum Control System for the Computational Process and the Execution of Algorithms

Sergey M. Gushanskiy, Viktor Potapov, Н М Коробейникова

Currently, the theory of quantum computing is actively developing. Despite the fact that a quantum computer has some features, any algorithm designed for a classical computer can be implemented for a quantum one. The relevance of the topic of quantum computers is confirmed by the fact that even now banking systems, cryptography and encryption of information require enormous resources of computing systems, these are just some examples, but the most important and vivid ones that relate to the everyday life of a huge part of the world's population. A hardware computing core has been developed and simulated, which is the main part of an accelerator based on field-programmable gate array with computer aided design Altera Quartus. Considering the obtained time dependence of the number of cycles required for the impact of a single-qubit quantum gate on a quantum register on the number of qubits and parallel arithmetic logic units in the hardware computing core, when simulating quantum computing, a method was developed to determine the increase in hardware performance and ways to improve the performance of an accelerator based on a hardware computing core were developed. based on field-programmable gate array.

International Russian Automation Conference (RusAutoCon)•Sep 10, 2023•0 citations

Numerical characteristics of quantum computer simulation

Andrey Yu. Chernyavskiy, Kamil Khamitov, Alexey Teplov +2 more

The simulation of quantum circuits is significantly important for the implementation of quantum information technologies. The main difficulty of such modeling is the exponential growth of dimensionality, thus the usage of modern high-performance parallel computations is relevant. As it is well known, arbitrary quantum computation in circuit model can be done by only single- and two-qubit gates, and we analyze the computational structure and properties of the simulation of such gates. We investigate the fact that the unique properties of quantum nature lead to the computational properties of the considered algorithms: the quantum parallelism make the simulation of quantum gates highly parallel, and on the other hand, quantum entanglement leads to the problem of computational locality during simulation. We use the methodology of the AlgoWiki project (algowiki-project.org) to analyze the algorithm. This methodology consists of theoretical (sequential and parallel complexity, macro structure, and visual informational graph) and experimental (locality and memory access, scalability and more specific dynamic characteristics) parts. Experimental part was made by using the petascale Lomonosov supercomputer (Moscow State University, Russia). We show that the simulation of quantum gates is a good base for the research and testing of the development methods for data intense parallel software, and considered methodology of the analysis can be successfully used for the improvement of the algorithms in quantum information science.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 30, 2016•0 citations

Development and simulation of the quantum microarchitecture operation using an optimization algorithm for a quantum calculation process

Viktor Potapov, S.M. Gushansky

The theory of quantum computing is being actively developed. Despite the fact that quantum computing device has some peculiarities, any task designed for a classical computer can be reproduced on a quantum system. The aim of the research is to develop a methodology for constructing models of quantum systems simulators using hardware simulators. The subject of this research is methods for constructing quantum computing devices and systems. In the course of the research, the system analysis methods and computer modeling, methods of object-oriented design were used. Modern high-level languages were used to solve the problems of constructing a modular quantum system with an open architecture. The work of a quantum microarchitecture using an algorithm for optimizing a quantum computational process has been developed and modeled. A universal methodology for modeling algorithms of a quantum nature using the hardware core and requirements for the mutual operation of software and hardware components for the efficient operation of a quantum system is derived.

The Herald of the Siberian State University of Telecommunications and Information Science•Dec 18, 2021•0 citations

Quantum Computers and Their Simulation.

Thomas Lippert

Quantum computing is based on the exploitation of quantum effects to perform some important computations more efficiently than ever possible on classical computers. Well known quantum algorithms are Shors polynomial time factoring algorithm and Grovers data base search scheme. Their potential is due to the parallelism of a quantum computation increasing exponentially with the size of the computing device. IBM has succeeded in building a first working quantum computing device with up to 7 qubits based on NMR technology, however, the construction of large multi-qubit systems appears to become extremely difficult due to the loss of coherence of the quantum states. Like the design process of modern microprocessors which is carried out by means of sophisticated software, modelling and simulation of the entire QC device is even more relevant. Simulation is required in order to understand the functioning of quantum algorithms, to construct novel quantum algorithms, to write quantum programs, to teach quantum computing, to construct real quantum computers, to understand and fight de-coherence and to understand and control the influence of the environment. Since quantum parallelism increases exponentially with the size of the quantum computer, parallel supercomputers are required for realistic simulations. I intend to give an introduction into the simulation of quantum computers using conventional computers. The simulation is based on a generic physical model of quantum computer hardware. Issues like parallel gate level simulators, modelling of QCs, simulators for physical quantum computers are addressed.

ARCS Workshops•Jan 1, 2004•0 citations
During the study, software techniques for optimizing the quantum computer model were considered. The main goal of techniques that increase the efficiency of modeling is to reduce the amount of data that must be processed when modeling quantum gates. The most suitable algorithm for implementing a hardware accelerator was considered and modeled in the experimental part. Algorithms of graph theory or decision diagrams are not very suitable for this task, since their implementation will require the implementation of tensor matrix products, which is more convenient to do on a software simulator. It is also worth noting the increasingly growing interest in modeling quantum computing on special hardware, such as video cards or supercomputers. Therefore, the technique presented in the work is relevant, because it combines software solutions in the field of optimization over the past few years and recently studied methods for modeling quantum computing.
In the past few decades, there has been an acute problem of creating a quantum computer that uses quantum mechanical effects such as quantum parallelism and quantum entanglement for computations. Using these mechanisms, the quantum computer is able to solve some of the NP-class problems in polynomial time. A hardware approach to modeling quantum computing is considered, and a general mathematical model of the operation of a quantum computer is described, and a technique for mathematical modeling of quantum computing is presented. At the stage of consideration of the method of mathematical modeling, the most resource-intensive parts of the model are indicated. Also, issues related to data parallelization on a hardware accelerator, which are planned to be used to simulate quantum computing, were considered, and algorithms for the operation of this type of accelerator were given. A more compact data format is proposed, which is recommended to be used when implementing the accelerator. Using the proposed format, it is possible to reduce the resources spent on elementary arithmetic operations. The possibility of introducing an optimization algorithm to minimize the time spent in computations, as well as to speed up the execution of quantum algorithms in simulators of a quantum computer at the stage of the effect of quantum gates on the quantum register model, is proposed. The results of the optimization algorithm and its comparison with the classical mathematical approach using a software model are presented.
Recently, there has been a rapid increase in interest in quantum computers. Their work isbased on the use of quantum-mechanical phenomena such as superposition and entanglement forcomputing to transform input data into outputs that can actually provide effective performance3–4 orders of magnitude higher than any modern computing devices, which will allow solving theabove and others. tasks in real- and accelerated-time scale. This article is devoted to solving theproblem of research and development of methods for optimizing quantum computing within theframework of the application of quantum accelerators. A block diagram of a hardware acceleratoris proposed to increase the performance of simulated quantum computing. The development of thestructural diagram of the communication module of the hardware accelerator and the softwaremodel was carried out. The relevance of these studies lies in mathematical and software modelingand implementation of correction codes for correcting several types of quantum errors in the developmentand implementation of quantum algorithms for solving classes of problems of a classicalnature. The scientific novelty of this direction is expressed in the elimination of one of the disadvantagesof the quantum computational process. The scientific novelty of this area is primarilyexpressed in the constant updating and supplementation of the field of quantum research in anumber of areas, and the computer simulation of quantum physical phenomena and features ispoorly covered in the world.
Currently, the theory of quantum computing is actively developing. Despite the fact that a quantum computer has some features, any algorithm designed for a classical computer can be implemented for a quantum one. The relevance of the topic of quantum computers is confirmed by the fact that even now banking systems, cryptography and encryption of information require enormous resources of computing systems, these are just some examples, but the most important and vivid ones that relate to the everyday life of a huge part of the world's population. A hardware computing core has been developed and simulated, which is the main part of an accelerator based on field-programmable gate array with computer aided design Altera Quartus. Considering the obtained time dependence of the number of cycles required for the impact of a single-qubit quantum gate on a quantum register on the number of qubits and parallel arithmetic logic units in the hardware computing core, when simulating quantum computing, a method was developed to determine the increase in hardware performance and ways to improve the performance of an accelerator based on a hardware computing core were developed. based on field-programmable gate array.
The simulation of quantum circuits is significantly important for the implementation of quantum information technologies. The main difficulty of such modeling is the exponential growth of dimensionality, thus the usage of modern high-performance parallel computations is relevant. As it is well known, arbitrary quantum computation in circuit model can be done by only single- and two-qubit gates, and we analyze the computational structure and properties of the simulation of such gates. We investigate the fact that the unique properties of quantum nature lead to the computational properties of the considered algorithms: the quantum parallelism make the simulation of quantum gates highly parallel, and on the other hand, quantum entanglement leads to the problem of computational locality during simulation. We use the methodology of the AlgoWiki project (algowiki-project.org) to analyze the algorithm. This methodology consists of theoretical (sequential and parallel complexity, macro structure, and visual informational graph) and experimental (locality and memory access, scalability and more specific dynamic characteristics) parts. Experimental part was made by using the petascale Lomonosov supercomputer (Moscow State University, Russia). We show that the simulation of quantum gates is a good base for the research and testing of the development methods for data intense parallel software, and considered methodology of the analysis can be successfully used for the improvement of the algorithms in quantum information science.
The theory of quantum computing is being actively developed. Despite the fact that quantum computing device has some peculiarities, any task designed for a classical computer can be reproduced on a quantum system. The aim of the research is to develop a methodology for constructing models of quantum systems simulators using hardware simulators. The subject of this research is methods for constructing quantum computing devices and systems. In the course of the research, the system analysis methods and computer modeling, methods of object-oriented design were used. Modern high-level languages were used to solve the problems of constructing a modular quantum system with an open architecture. The work of a quantum microarchitecture using an algorithm for optimizing a quantum computational process has been developed and modeled. A universal methodology for modeling algorithms of a quantum nature using the hardware core and requirements for the mutual operation of software and hardware components for the efficient operation of a quantum system is derived.
Quantum computing is based on the exploitation of quantum effects to perform some important computations more efficiently than ever possible on classical computers. Well known quantum algorithms are Shors polynomial time factoring algorithm and Grovers data base search scheme. Their potential is due to the parallelism of a quantum computation increasing exponentially with the size of the computing device. IBM has succeeded in building a first working quantum computing device with up to 7 qubits based on NMR technology, however, the construction of large multi-qubit systems appears to become extremely difficult due to the loss of coherence of the quantum states. Like the design process of modern microprocessors which is carried out by means of sophisticated software, modelling and simulation of the entire QC device is even more relevant. Simulation is required in order to understand the functioning of quantum algorithms, to construct novel quantum algorithms, to write quantum programs, to teach quantum computing, to construct real quantum computers, to understand and fight de-coherence and to understand and control the influence of the environment. Since quantum parallelism increases exponentially with the size of the quantum computer, parallel supercomputers are required for realistic simulations. I intend to give an introduction into the simulation of quantum computers using conventional computers. The simulation is based on a generic physical model of quantum computer hardware. Issues like parallel gate level simulators, modelling of QCs, simulators for physical quantum computers are addressed.