Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

A method of determining microwave dissipation of Josephson junctions with non-linear frequency response

Heng-Jie Chen, Hang Xue, Shaoxiong Li, Zhen Wang

Published Jan 1, 2019• 1 citation
Publisher

Abstract

Based on Josephson junction (JJ), superconducting quantum bit (qubit) is operated at frequencies of several GHz. Dissipation of JJs in this frequency range can cause energy relaxation in qubits, and limit coherence time, therefore it is highly concerned and needs to be determined quantitatively. The dissipation of JJs can be quantified by microwave quality factor. It is usually done at very low temperature (~mK) to determine whether a JJ is suitable for qubit devices by measuring the quality factor. In this paper, a method based on nonlinear frequency response of JJs is proposed to determine the quality factor. This method can be used in thermal activation regime, which may bring great conveniences to experiments. To analyze high frequency properties of JJs, the dynamic equation of a current-biased JJ, which describes high frequency oscillation of the JJ, is introduced. A fourth-order potential approximation is used to obtain the analytical equation of non-linear response. The dependence on quality factor, as well as on amplitude, of difference between JJ’s plasma frequency and resonant frequency, is derived from the equation. The approximate treatment is quantitatively validated by our numerical simulations with practical JJ parameters including different environment influences. Thus, based on nonlinear frequency response of JJs, a reliable and simple method to determine quality factor of JJ is proposed, which is desirable for exploring JJ based microwave devices such as parametric amplifier, superconducting qubit. Being driven well into the nonlinear microwave response regime, due to frequency-amplitude interaction, the resonant frequency of a current bias JJ deviates from the JJ’s plasma frequency. The deviation is directly related to the microwave quality factor. Hence, the quality factor can be deducted from the experimental measurement of the resonant frequency deviation, with different microwave power values applied. In comparison with linear resonance experiment, the nonlinear resonance used by the proposed method produces stronger signal. Therefore it is more robust against external noise. When being conducted at high temperature, the proposed method is more reliable. The accuracy of the measured quality factor primarily depends on those of the JJ’s parameters such as critical current and capacitance, while those parameters can be experimentally determined with high precision.

DOI
10.7498/aps.68.20190167

Related papers

Determination of the dissipation in superconducting Josephson junctions

Daniela Mugnai, Anedio Ranfagni, Ilaria Cacciari

The results relative to macroscopic quantum tunneling rate, out of the metastable state of Josephson junctions, are examined in view of determining the effect of dissipation. We adopt a simple criterion in accordance to which the effect of dissipation can be evaluated by analyzing the shortening of the semiclassical traversal time of the barrier. In almost all the considered cases, especially those with relatively large capacitance values, the relative time shortening turns out to be about 20% and with a corresponding quality factor Q ≃ 5.5. However, beyond the specific cases here considered, still in the regime of moderate dissipation, the method is applicable also to different situations with different values of the quality factor. The method allows, within the error limits, for a reliable determination of the load resistance RL, the less accessible quantity in the framework of the resistively and capacitively shunted junction model, provided that the characteristics of the junction (intrinsic capacitance, critical current, and the ratio of the bias current to the critical one) are known with sufficient accuracy.

Journal of Applied Physics•Feb 2, 2015•1 citation

Spectroscopic resonance broadening in a Josephson junction qubit due to current noise

Haitan Xu, A. J. Berkley, Roberto Ramos +7 more

We analyze the effect of dissipation and low-frequency current noise on quantum coherence in a current-biased Josephson junction that has low damping. Developing a stochastic Bloch equation for the reduced density matrix of the system, we determine the resonance response of the system to a weak external microwave current drive. We characterize the response by finding the spectroscopic coherence time ${T}_{2}^{*}$ as a function of the energy relaxation time ${T}_{1}$ and the current noise power spectral density. For current noise with a constant spectral density up to a frequency ${f}_{c}⪢{(2\ensuremath{\pi}{T}_{1})}^{\ensuremath{-}1}$, we find that the resonance broadening is proportional to the noise spectral density, while for ${f}_{c}⪡{(2\ensuremath{\pi}{T}_{1})}^{\ensuremath{-}1}$, the broadening is proportional to the rms current noise. We compare our results to microwave spectroscopy data on $100\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{2}$ Nb and Al tunnel junctions at milli-Kelvin temperatures and find good agreement between the measured response spectra and our model simulations.

Physical Review B•Feb 23, 2005•25 citations

Generalized Langevin theory for Josephson parametric amplification

Waldemar Kaiser, Michael Haider, Johannes A. Russer +2 more

Superconducting quantum circuits exhibit an extraordinary potential for future electronic applications. The most important element in superconducting quantum circuits is the Josephson junction, built by nanofabricated superconducting electrodes separated by a thin insulating layer. Superconducting devices allow mixing and parametric amplification up to the terahertz range under low energy consumption and ultra-low noise. High frequency signals at low temperatures exhibit a photon energy exceeding the thermal energy, resulting in the need of a quantum mechanical treatment of the electromagnetic field at millimeter-wave frequencies. In this work, we investigate the dynamic behaviour of a negative-resistance, dissipative DC biased Josephson parametric amplifier. The Langevin theory is used for modeling of the dissipation in the resonant circuits. We investigate Markovian dynamics for modeling the dissipative Josephson parametric amplifier in a correct manner, neglecting memory effects. We derive the equations of motions of the resonator operators and numerically evaluate the time evolution of the signal and noise energies. Applying a phenomenological multi-photon coupling approach, a correction of the Markovian assumption is achieved providing an expected saturation in the dynamical behaviour of the circuit.

IEEE MTT-S International Microwave Symposium digest•Jun 1, 2017•2 citations

Resonant readout of a superconducting persistent current qubit

Janice C. Lee

Superconducting Josephson junction devices rank among the best candidates for realizing a quantum computer. While the coherent control of quantum dynamics has been demonstrated in these solid-state, macroscopic quantum systems, a major challenge has been to increase the coherence times for these qubits. With an objective to reduce the level of readout-induced decoherence, this thesis work focuses on a resonant readout scheme developed for a niobium persistent-current (PC) qubit. This non-dissipative readout approach detects the flux state of the qubit by sensing a change in the Josephson inductance of a SQUID magnetometer. By incorporating the SQUID inductor in a high-Q resonant circuit, we distinguished the flux states of the qubit as a shift in the resonant frequency at 300 mK. The nonlinearity due to the Josephson inductance has characteristic effects on the resonant behavior of the readout circuit. We observed novel manifestation of this nonlinearity given the high quality factor of the resonance. The readout circuit was characterized in the linear as well as the nonlinear regime for its potential use as a bifurcation amplifier. Numerical simulations based on Josephson-junction circuits were also performed to understand the observed nonlinearity in the resonant behavior.

•Jan 1, 2006•0 citations

Long Josephson junction embedded into a planar resonator at microwave frequencies: Numerical simulation of fluxon dynamics

E. Goldobin, Alexander M. Klushin, M. Siegel +1 more

We have investigated numerically a system consisting of a long Josephson junction embedded into a microstrip resonator. For such a configuration the Josephson vortex dynamics in the junction is driven by the oscillating currents in the resonator. We have calculated the complex impedance of the junction at the resonant frequency. The Q factor of the resonator and the change of the resonant frequency of the whole system can then be easily calculated knowing the parameters of the resonator without Josephson junction. The fluxon dynamics and the complex impedance of the junction are simulated for different values of the junction length, damping, dc bias current, and dc magnetic field. This allows us to explain the behavior of the impedance of the junction and different loss mechanisms. In particular, we predict a nonmonotonic dependence of the both real and imaginary parts of the impedance on the amplitude of the oscillating current in the resonator for some range of parameters. Our results show that such a combination of active and passive superconducting elements forms a rather interesting nonlinear physical system which might be useful for development of tunable/switchable superconducting resonators and suggests an experimental technique for detecting trapped vortices in long junctions.

Journal of Applied Physics•Aug 30, 2002•6 citations

Power-dependent internal loss in Josephson bifurcation amplifiers

道生 渡部, K. Inomata, Tsuyoshi Yamamoto +1 more

We have studied nonlinear superconducting resonators: $\ensuremath{\lambda}/2$ coplanar-waveguide (CPW) resonators with Josephson junctions (JJs) placed in the middle and $\ensuremath{\lambda}/4$ CPW resonators terminated by JJs, which can be used for the qubit readout as ``bifurcation amplifiers.'' The nonlinearity of the resonators arises from the Josephson junctions, and because of the nonlinearity, the resonators with appropriate parameters are expected to show a hysteretic response to the frequency sweep, or ``bifurcation,'' when they are driven with a sufficiently large power. We designed and fabricated resonators whose resonant frequencies were around 10 GHz. We characterized the resonators at low temperatures, $T<0.05\text{ }\text{K}$, and confirmed that they indeed exhibited hysteresis. The sizes of the hysteresis, however, are sometimes considerably smaller than the predictions based on the loaded quality factor in the weak drive regime. When the discrepancy appears, it is mostly explained by taking into account the internal loss, which often increases in our resonators with increasing drive power in the relevant power range. As a possible origin of the power-dependent loss, the quasiparticle channel of conductance of the JJs is discussed.

arXiv:0911.4221•Physical Review B•Nov 3, 2009•7 citations
Based on Josephson junction (JJ), superconducting quantum bit (qubit) is operated at frequencies of several GHz. Dissipation of JJs in this frequency range can cause energy relaxation in qubits, and limit coherence time, therefore it is highly concerned and needs to be determined quantitatively. The dissipation of JJs can be quantified by microwave quality factor. It is usually done at very low temperature (~mK) to determine whether a JJ is suitable for qubit devices by measuring the quality factor. In this paper, a method based on nonlinear frequency response of JJs is proposed to determine the quality factor. This method can be used in thermal activation regime, which may bring great conveniences to experiments. To analyze high frequency properties of JJs, the dynamic equation of a current-biased JJ, which describes high frequency oscillation of the JJ, is introduced. A fourth-order potential approximation is used to obtain the analytical equation of non-linear response. The dependence on quality factor, as well as on amplitude, of difference between JJ’s plasma frequency and resonant frequency, is derived from the equation. The approximate treatment is quantitatively validated by our numerical simulations with practical JJ parameters including different environment influences. Thus, based on nonlinear frequency response of JJs, a reliable and simple method to determine quality factor of JJ is proposed, which is desirable for exploring JJ based microwave devices such as parametric amplifier, superconducting qubit. Being driven well into the nonlinear microwave response regime, due to frequency-amplitude interaction, the resonant frequency of a current bias JJ deviates from the JJ’s plasma frequency. The deviation is directly related to the microwave quality factor. Hence, the quality factor can be deducted from the experimental measurement of the resonant frequency deviation, with different microwave power values applied. In comparison with linear resonance experiment, the nonlinear resonance used by the proposed method produces stronger signal. Therefore it is more robust against external noise. When being conducted at high temperature, the proposed method is more reliable. The accuracy of the measured quality factor primarily depends on those of the JJ’s parameters such as critical current and capacitance, while those parameters can be experimentally determined with high precision.
The results relative to macroscopic quantum tunneling rate, out of the metastable state of Josephson junctions, are examined in view of determining the effect of dissipation. We adopt a simple criterion in accordance to which the effect of dissipation can be evaluated by analyzing the shortening of the semiclassical traversal time of the barrier. In almost all the considered cases, especially those with relatively large capacitance values, the relative time shortening turns out to be about 20% and with a corresponding quality factor Q ≃ 5.5. However, beyond the specific cases here considered, still in the regime of moderate dissipation, the method is applicable also to different situations with different values of the quality factor. The method allows, within the error limits, for a reliable determination of the load resistance RL, the less accessible quantity in the framework of the resistively and capacitively shunted junction model, provided that the characteristics of the junction (intrinsic capacitance, critical current, and the ratio of the bias current to the critical one) are known with sufficient accuracy.
We analyze the effect of dissipation and low-frequency current noise on quantum coherence in a current-biased Josephson junction that has low damping. Developing a stochastic Bloch equation for the reduced density matrix of the system, we determine the resonance response of the system to a weak external microwave current drive. We characterize the response by finding the spectroscopic coherence time T2∗{T}_{2}^{*}T2∗​ as a function of the energy relaxation time T1{T}_{1}T1​ and the current noise power spectral density. For current noise with a constant spectral density up to a frequency ${f}_{c}⪢{(2\ensuremath{\pi}{T}_{1})}^{\ensuremath{-}1}$, we find that the resonance broadening is proportional to the noise spectral density, while for ${f}_{c}⪡{(2\ensuremath{\pi}{T}_{1})}^{\ensuremath{-}1}$, the broadening is proportional to the rms current noise. We compare our results to microwave spectroscopy data on $100\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{2}$ Nb and Al tunnel junctions at milli-Kelvin temperatures and find good agreement between the measured response spectra and our model simulations.
Superconducting quantum circuits exhibit an extraordinary potential for future electronic applications. The most important element in superconducting quantum circuits is the Josephson junction, built by nanofabricated superconducting electrodes separated by a thin insulating layer. Superconducting devices allow mixing and parametric amplification up to the terahertz range under low energy consumption and ultra-low noise. High frequency signals at low temperatures exhibit a photon energy exceeding the thermal energy, resulting in the need of a quantum mechanical treatment of the electromagnetic field at millimeter-wave frequencies. In this work, we investigate the dynamic behaviour of a negative-resistance, dissipative DC biased Josephson parametric amplifier. The Langevin theory is used for modeling of the dissipation in the resonant circuits. We investigate Markovian dynamics for modeling the dissipative Josephson parametric amplifier in a correct manner, neglecting memory effects. We derive the equations of motions of the resonator operators and numerically evaluate the time evolution of the signal and noise energies. Applying a phenomenological multi-photon coupling approach, a correction of the Markovian assumption is achieved providing an expected saturation in the dynamical behaviour of the circuit.
Superconducting Josephson junction devices rank among the best candidates for realizing a quantum computer. While the coherent control of quantum dynamics has been demonstrated in these solid-state, macroscopic quantum systems, a major challenge has been to increase the coherence times for these qubits. With an objective to reduce the level of readout-induced decoherence, this thesis work focuses on a resonant readout scheme developed for a niobium persistent-current (PC) qubit. This non-dissipative readout approach detects the flux state of the qubit by sensing a change in the Josephson inductance of a SQUID magnetometer. By incorporating the SQUID inductor in a high-Q resonant circuit, we distinguished the flux states of the qubit as a shift in the resonant frequency at 300 mK. The nonlinearity due to the Josephson inductance has characteristic effects on the resonant behavior of the readout circuit. We observed novel manifestation of this nonlinearity given the high quality factor of the resonance. The readout circuit was characterized in the linear as well as the nonlinear regime for its potential use as a bifurcation amplifier. Numerical simulations based on Josephson-junction circuits were also performed to understand the observed nonlinearity in the resonant behavior.
We have investigated numerically a system consisting of a long Josephson junction embedded into a microstrip resonator. For such a configuration the Josephson vortex dynamics in the junction is driven by the oscillating currents in the resonator. We have calculated the complex impedance of the junction at the resonant frequency. The Q factor of the resonator and the change of the resonant frequency of the whole system can then be easily calculated knowing the parameters of the resonator without Josephson junction. The fluxon dynamics and the complex impedance of the junction are simulated for different values of the junction length, damping, dc bias current, and dc magnetic field. This allows us to explain the behavior of the impedance of the junction and different loss mechanisms. In particular, we predict a nonmonotonic dependence of the both real and imaginary parts of the impedance on the amplitude of the oscillating current in the resonator for some range of parameters. Our results show that such a combination of active and passive superconducting elements forms a rather interesting nonlinear physical system which might be useful for development of tunable/switchable superconducting resonators and suggests an experimental technique for detecting trapped vortices in long junctions.
We have studied nonlinear superconducting resonators: $\ensuremath{\lambda}/2$ coplanar-waveguide (CPW) resonators with Josephson junctions (JJs) placed in the middle and $\ensuremath{\lambda}/4$ CPW resonators terminated by JJs, which can be used for the qubit readout as ``bifurcation amplifiers.'' The nonlinearity of the resonators arises from the Josephson junctions, and because of the nonlinearity, the resonators with appropriate parameters are expected to show a hysteretic response to the frequency sweep, or ``bifurcation,'' when they are driven with a sufficiently large power. We designed and fabricated resonators whose resonant frequencies were around 10 GHz. We characterized the resonators at low temperatures, T<0.05 KT<0.05\text{ }\text{K}T<0.05 K, and confirmed that they indeed exhibited hysteresis. The sizes of the hysteresis, however, are sometimes considerably smaller than the predictions based on the loaded quality factor in the weak drive regime. When the discrepancy appears, it is mostly explained by taking into account the internal loss, which often increases in our resonators with increasing drive power in the relevant power range. As a possible origin of the power-dependent loss, the quasiparticle channel of conductance of the JJs is discussed.