Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Quantum Information on Nonlinearly Coupled Optical Modes

Stefan Krastanov, Mikkel Heuck, Kurt A. Jacobs, Prineha Narang, Dirk Robert Englund

Published Jan 1, 2020• 0 citations
Publisher

Abstract

Pursuing room-temperature quantum hardware, we discuss multi-mode optical cavities with nonlinear couplings and focus on material and fabrication requirements for such devices. We demonstrate their use for a number of quantum communication and computation tasks.
DOI
10.1364/cleo_at.2020.jtu2c.1

Related papers

Correlating Photons Using the Collective Nonlinear Response of Atoms Weakly Coupled to an Optical Mode

Jürgen Volz, Adarsh S. Prasad, Jakob Hinney +7 more

The generation of correlated photons typically requires a highly nonlinear medium that is strongly coupled to an optical mode. Recently, significant advances have been made in this direction by strongly coupling photons to quantum emitters and exploiting the inherently nonlinear response of the latter. A number of methods have been pursued for this purpose, employing, e.g., high finesse optical cavities or strongly interacting Rydberg atoms. However, the implementation of strong and low-loss photon-photon interactions remains a challenging goal.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•3 citations

Nonlinear Optics via Hybrid Quantum Systems

Xunnong Xu, Haitan Xu, Michael J. Gullans +4 more

Realization of a quantum optical nonlinearity at the single-photon level remains an outstanding challenge. Here we consider optomechanical and microwave-domain approaches for such nonlinearities, and develop applications in quantum sensing and simulation.

Conference on Lasers and Electro-Optics•Jan 1, 2015•0 citations

Microwave-to-Optical Transduction with Gallium Phosphide Electro-Optomechanical Devices

Simon Hönl

Quantum computing is one of the great scientific challenges of the 21st century. Small-scale systems today promise to surpass classical computers in the coming years and to enable the solution of classically intractable computational tasks in the fields of quantum chemistry, optimization, cryptography and more. In contrast to classical computers, quantum computers based on superconducting quantum bits (qubits) can to date not be linked over long distance in a network to improve their computing capacity, since devices, which preserve the quantumstate when it is transferred from one machine to another, are not available. Several approaches are being pursued to realize such a component, one of themost promising to date makes use of an intermediary, micromechanical element that enables quantum coherent conversion between the information present in the quantum computer and an optical fiber, without compromising the quantum nature of the information, via optomechanical interaction. This approach could allow fiber-optic quantum networks between separate quantum computers based on superconducting qubits in the future. In this work a platformfor such a microwave-to-optic link was developed based on the piezoelectric material gallium phosphide. This III-V semiconductor offers not only a piezoelectric coupling between the electric field of a microwave circuit and a mechanicalmode, but also a wide optical bandgap E_g = 2.26eV which reduces nonlinear optical absorption in the device and a large refractive index n(1550nm) = 3.01 which allows strong optical confinement at near-infrared wavelengths. Importantly and in contrast to other approaches with gallium phosphide, an epitaxially grown, single crystal thin film of the material is integrated directly on a silicon wafer with pre-structured niobium electrodes by direct wafer-bonding. This opens up the possibility of integrating the device design presented here directly with superconducting qubits fabricated with this material system. A microwave-to-optical transducer design was simulated and fabricated in the galliumphosphideon- silicon platform. The device was found to exhibit large vacuum optomechanical coupling rates g0/2 pi ~ 290kHz and a high intrinsic optical quality factor Q >10^5 while at the same time permitting electromechanical coupling to a microwave electrode. Coherent microwave-tooptical transductionwas shown at room temperature for this device and the electromechanical coupling rate could be extracted from a model derived by input-output theory. The electromechanical coupling between the electro-optomechanical device and a superconducting qubit was estimated to be g/2 pi = O(200kHz) which indicates that strong coupling between the here presented device and a superconducting transmon qubit is achievable. In addition, superconducting microwave cavities with high quality factor at single photon energy Q ~ 5x10^5 were fabricated and measured to verify that fabrication process of the microwave-to-optical transducer is compatible with high-quality superconducting microwave circuits.

•Jan 1, 2021•1 citation

AlGaAs photonic devices: from quantum state generation to quantum communications

Claire Autebert

One of the main issues in the domain of quantum information and communication is the generation, manipulation and detection of several qubits on a single chip. Several approaches are currently investigated for the implementation of qubits on different types of physical supports and a variety of quantum information technologies are under development: for quantum memories, spectacular advances have been done on trapped atoms and ions, while to transmit information, photons are the ideal support thanks to their high speed of propagation and their almost immunity against decoherence. My thesis work has been focused on the conception, fabrication and characterization of a miniaturized semiconductor source of entangled photons, working at room temperature and telecom wavelengths. First the theoretical concepts relevant to understand the work are described (chapter 1). Then the conception and fabrication procedures are given (chapter 2). Chapter 3 presents the optoelectronics characterization of the device under electrical pumping, and chapter 4 the results on the optical losses measurements and the nonlinear optical characterization (second harmonic generation, spontaneous parametric down conversion and joint spectral intensity reconstruction). Chapters 5 and 6 focus on the characterization of the quantum state generated by a passive sample (demonstration of indistinguishability and energy-time entanglement) and its utilization in a multi- user quantum key distribution protocol (polarization entanglement). Finally the work on the first electrically driven photon pairs source emitting in the telecom range and working at room temperature is presented (chapter 7).

•Nov 14, 2016•0 citations

Quantum photonics for computation and simulation

Jacob M. Taylor

I will discuss recent advances towards implementation of nonlinear photonic devices for quantum information processing and quantum simulation of topological phases of matter, using approaches from circuit QED and silicon-on-insulator technologies.

Frontiers in Optics•Jan 1, 2012•0 citations

Piezoelectric resonators in thin-film barium titanate from room temperature to millikelvin

Hao Tian, Shu-Yuan Chang, Nuha Akhtar +2 more

Ferroelectric materials, with their strong nonlinearities, underpin key technologies across radio-frequency (RF) signal processing, optical communications, and emerging quantum systems. Barium titanate (BTO) is a notable example, combining strong piezoelectric and electro-optic responses. While bulk BTO has been studied for decades, the piezoelectric properties of its recently available thin films, and their behavior at the millikelvin temperatures relevant to quantum hardware, remain largely unexplored. Here, we fabricate and characterize surface acoustic wave (SAW) resonators on thin-film BTO. The measured devices exhibit high electromechanical coupling (k2eff 0.14 at 5.2 GHz) and operate up to 7.8 GHz. From these measurements, combined with finite-element modeling of the multi-domain microstructure, we extract an effective piezoelectric coefficient d33eff of 53 pC/N, comparable to bulk BTO. Exploiting the intrinsic ferroelectricity, we further demonstrate low-voltage switching with a fast (100 ns) response, attractive for reconfigurable RF front-ends and parametric amplifiers. Extending these measurements to millikelvin temperatures, we find that the piezoelectric response persists, with d33eff 19 pC/N, pointing to the potential of BTO for piezoelectric coupling in superconducting quantum circuits. These results position thin-film BTO as a promising piezoelectric platform for both classical and quantum information technologies.

physics.app-phCross-listedarXiv:2606.18522•Jun 18, 2026
The generation of correlated photons typically requires a highly nonlinear medium that is strongly coupled to an optical mode. Recently, significant advances have been made in this direction by strongly coupling photons to quantum emitters and exploiting the inherently nonlinear response of the latter. A number of methods have been pursued for this purpose, employing, e.g., high finesse optical cavities or strongly interacting Rydberg atoms. However, the implementation of strong and low-loss photon-photon interactions remains a challenging goal.
Quantum computing is one of the great scientific challenges of the 21st century. Small-scale systems today promise to surpass classical computers in the coming years and to enable the solution of classically intractable computational tasks in the fields of quantum chemistry, optimization, cryptography and more. In contrast to classical computers, quantum computers based on superconducting quantum bits (qubits) can to date not be linked over long distance in a network to improve their computing capacity, since devices, which preserve the quantumstate when it is transferred from one machine to another, are not available. Several approaches are being pursued to realize such a component, one of themost promising to date makes use of an intermediary, micromechanical element that enables quantum coherent conversion between the information present in the quantum computer and an optical fiber, without compromising the quantum nature of the information, via optomechanical interaction. This approach could allow fiber-optic quantum networks between separate quantum computers based on superconducting qubits in the future. In this work a platformfor such a microwave-to-optic link was developed based on the piezoelectric material gallium phosphide. This III-V semiconductor offers not only a piezoelectric coupling between the electric field of a microwave circuit and a mechanicalmode, but also a wide optical bandgap E_g = 2.26eV which reduces nonlinear optical absorption in the device and a large refractive index n(1550nm) = 3.01 which allows strong optical confinement at near-infrared wavelengths. Importantly and in contrast to other approaches with gallium phosphide, an epitaxially grown, single crystal thin film of the material is integrated directly on a silicon wafer with pre-structured niobium electrodes by direct wafer-bonding. This opens up the possibility of integrating the device design presented here directly with superconducting qubits fabricated with this material system. A microwave-to-optical transducer design was simulated and fabricated in the galliumphosphideon- silicon platform. The device was found to exhibit large vacuum optomechanical coupling rates g0/2 pi ~ 290kHz and a high intrinsic optical quality factor Q >10^5 while at the same time permitting electromechanical coupling to a microwave electrode. Coherent microwave-tooptical transductionwas shown at room temperature for this device and the electromechanical coupling rate could be extracted from a model derived by input-output theory. The electromechanical coupling between the electro-optomechanical device and a superconducting qubit was estimated to be g/2 pi = O(200kHz) which indicates that strong coupling between the here presented device and a superconducting transmon qubit is achievable. In addition, superconducting microwave cavities with high quality factor at single photon energy Q ~ 5x10^5 were fabricated and measured to verify that fabrication process of the microwave-to-optical transducer is compatible with high-quality superconducting microwave circuits.
One of the main issues in the domain of quantum information and communication is the generation, manipulation and detection of several qubits on a single chip. Several approaches are currently investigated for the implementation of qubits on different types of physical supports and a variety of quantum information technologies are under development: for quantum memories, spectacular advances have been done on trapped atoms and ions, while to transmit information, photons are the ideal support thanks to their high speed of propagation and their almost immunity against decoherence. My thesis work has been focused on the conception, fabrication and characterization of a miniaturized semiconductor source of entangled photons, working at room temperature and telecom wavelengths. First the theoretical concepts relevant to understand the work are described (chapter 1). Then the conception and fabrication procedures are given (chapter 2). Chapter 3 presents the optoelectronics characterization of the device under electrical pumping, and chapter 4 the results on the optical losses measurements and the nonlinear optical characterization (second harmonic generation, spontaneous parametric down conversion and joint spectral intensity reconstruction). Chapters 5 and 6 focus on the characterization of the quantum state generated by a passive sample (demonstration of indistinguishability and energy-time entanglement) and its utilization in a multi- user quantum key distribution protocol (polarization entanglement). Finally the work on the first electrically driven photon pairs source emitting in the telecom range and working at room temperature is presented (chapter 7).
Ferroelectric materials, with their strong nonlinearities, underpin key technologies across radio-frequency (RF) signal processing, optical communications, and emerging quantum systems. Barium titanate (BTO) is a notable example, combining strong piezoelectric and electro-optic responses. While bulk BTO has been studied for decades, the piezoelectric properties of its recently available thin films, and their behavior at the millikelvin temperatures relevant to quantum hardware, remain largely unexplored. Here, we fabricate and characterize surface acoustic wave (SAW) resonators on thin-film BTO. The measured devices exhibit high electromechanical coupling (k2eff 0.14 at 5.2 GHz) and operate up to 7.8 GHz. From these measurements, combined with finite-element modeling of the multi-domain microstructure, we extract an effective piezoelectric coefficient d33eff of 53 pC/N, comparable to bulk BTO. Exploiting the intrinsic ferroelectricity, we further demonstrate low-voltage switching with a fast (100 ns) response, attractive for reconfigurable RF front-ends and parametric amplifiers. Extending these measurements to millikelvin temperatures, we find that the piezoelectric response persists, with d33eff 19 pC/N, pointing to the potential of BTO for piezoelectric coupling in superconducting quantum circuits. These results position thin-film BTO as a promising piezoelectric platform for both classical and quantum information technologies.