This paper presents an efficient algorithm for the time evolution of open quantum many-body systems using matrix-product states (MPS) proposing a convenient structure of the MPS-architecture, which exploits the initial state of system and reservoir. By doing so, numerically expensive re-ordering protocols are circumvented. It is applicable to systems with a Markovian type of interaction, where only the present state of the reservoir needs to be taken into account. Its adaption to a non-Markovian type of interaction between the many-body system and the reservoir is demonstrated, where the information backflow from the reservoir needs to be included in the computation. Also, the derivation of the basis in the quantum stochastic Schrödinger picture is shown. As a paradigmatic model, the Heisenberg spin chain with nearest-neighbor interaction is used. It is demonstrated that the algorithm allows for the access of large systems sizes. As an example for a non-Markovian type of interaction, the generation of highly unusual steady states in the many-body system with coherent feedback control is demonstrated for a chain length of N=30.
This paper presents an efficient algorithm for the time evolution of open quantum many-body systems using matrix-product states (MPS) proposing a convenient structure of the MPS-architecture, which exploits the initial state of system and reservoir. By doing so, numerically expensive re-ordering protocols are circumvented. It is applicable to systems with a Markovian type of interaction, where only the present state of the reservoir needs to be taken into account. Its adaption to a non-Markovian type of interaction between the many-body system and the reservoir is demonstrated, where the information backflow from the reservoir needs to be included in the computation. Also, the derivation of the basis in the quantum stochastic Schrödinger picture is shown. As a paradigmatic model, the Heisenberg spin chain with nearest-neighbor interaction is used. It is demonstrated that the algorithm allows for the access of large systems sizes. As an example for a non-Markovian type of interaction, the generation of highly unusual steady states in the many-body system with coherent feedback control is demonstrated for a chain length of N=30.
The study of open quantum systems forms one of the main problems of modern physics. This thesis aims at contributing to this field, and focuses on the investigation of non-Markovian dynamics of open quantum systems. Here, as a special case, quantum many-body systems provide for a rich field of research. With the ability to control them being of essential importance for the development of quantum technologies, the characterization of their dynamical properties has also drawn a lot of interest lately. One of the main methodological tasks in the study of open quantum systems is to reduce the infinite degrees of freedom of the total system. In order to achieve this, the thesis makes use of the tensor network method matrix product states and combines it with the picture of the quantum stochastic Schrödinger equation. However, when computing the dynamics of many-body systems of system size N, even the reduced system dynamics scale with 2N, making larger system sizes difficult to access. Therefore, especially when computing non-Markovian time-dynamics where the information backflow from the reservoir has to be taken into account, efficiently constructed algorithms are required. This thesis proposes these type of algorithms and demonstrates their application. They enable an access to larger system sizes, thus making it possible to investigate non-equilibrium steady-states of quantum many-body systems in a non-Markovian interaction for system sizes up to N=30. This thesis consists of three parts. The first part provides an introduction to the theory of open quantum systems and to the methodology for modeling them. The second part examines many-body system-reservoir interaction in the non-Markovian regime by investigating the case of fully coherent self-feedback. It uses the one-dimensional Heisenberg spin-1/2 chain as a paradigmatic and recently intensely studied many-body system. It is demonstrated that this gives rise to new conditions for the feedback phase and to highly non-trivial states within the system as well as to the possibility of partially characterizing the system non-invasively and storing excitation within it. Next, a novel approach to the boundary-driven Heisenberg chain is presented, where the chain is exposed to a coherent driving field, thus enabling a comparison to the well-studied incoherently driven model. The third part demonstrates the use of an external pump to control the feedback phase of a Lambda-type three-level system, where the external pump pulse is shown to be a new control parameter. The thesis concludes with the proposition to enhance the indistinguishability of two photons by feedback control.
We derive a hierarchy of matrix product states (HOMPS) method which is numerically exact and efficient for general non-Markovian dynamics in open quantum system. This HOMPS is trying to attack the exponential wall issue in the recently developed hierarchy of pure states (HOPS) scheme with two steps: a. finding an effective time-dependent Schrodinger equation which is equivalent to HOPS, b. propagating this equation within matrix product states/operators (MPS/MPO) representation. HOMPS works in linear form and takes into account finite temperature effect straightforwardly from the initial pure state. Applications of HOMPS to spin-boson model covering both high and low temperatures are provided, demonstrating the validity and efficiency of the new approach.
Simulating quantum many-body systems (QMBS) is one of the long-standing, highly non-trivial challenges in condensed matter physics and quantum information due to the exponentially growing size of the system's Hilbert space. To date, tensor networks have been an essential tool for studying such quantum systems, owing to their ability to efficiently capture the entanglement properties of the systems they represent. One of the well-known tensor network architectures, namely matrix product states (MPS), is the standard method for simulating one-dimensional QMBS. Here, we propose a simple, yet efficient, method to augment the already available MPS algorithms to simulate the dynamics of time-dependent Hamiltonians with better accuracy and a faster convergence rate, giving a second-order convergence compared to the first-order convergence of the standard method. We apply our proposed method to simulate the dynamics of a chain of single spins associated with nitrogen-vacancy color centers in diamonds, which has potential applications for practical and scalable quantum technologies, and find that our method improves the average error for a system of few NV centers by a factor of about 1000 for moderate step sizes. Our work paves the way for efficient simulation of QMBS under the influence of time-dependent Hamiltonians.
We derive a stochastic hierarchy of matrix product states (HOMPS) for non-Markovian dynamics in an open quantum system at finite temperature, which is numerically exact and efficient. HOMPS is obtained from the recently developed stochastic hierarchy of pure states (HOPS) by expressing HOPS in terms of formal creation and annihilation operators. The resulting stochastic first-order differential equation is then formulated in terms of matrix product states and matrix product operators. In this way the exponential complexity of HOPS can be reduced to scale polynomial with the number of particles. The validity and efficiency of HOMPS is demonstrated for the spin-boson model and long chains where each site is coupled to a structured, strongly non-Markovian environment.
In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Compared to classical systems, quantum many-body systems possess an exponentially enlarged number of degrees of freedom, significantly complicating a simulation on a classical computer. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). Based upon this connection, deeper understanding of the density matrix renormalization group can be obtained. After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. It is possible to extend the Matrix-Product-States approach to be able to represent arbitrary operators, the so-called Matrix-Product-Operators, which allows a fast and flexible calculation of arbitrary expectation values. To obtain algorithms to efficiently calculate groundstates, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotopic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases will be shown numerically by using Matrix-Product-States-based algorithms. A key effect of interacting one-dimensional quantum-mechanical many-body systems is the spin-charge separation. However, up to now only signs of the spin-charge separation have been observed in experiments. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of different hyperfine states of the ultracold atoms) with current state of the art experimental techniques. Ultracold atoms in optical lattices are well described by (Bose)-Hubbard models. In order to support this proposal, we present numerical results for realistic system parameters. Matrix-Product-States are an excellent tool for the simulation of one-dimensional quantum systems, however, they are not well suited for the simulation of higher dimensional systems. For strongly-correlated systems, for instance cuprates-based high-temperature superconductors, quantum fluctuations play an essential role. Classical mean-field theories neglect any kind of fluctuations, thus they are not suitable to describe strongly-correlated systems. The dynamical mean-field theory (DMFT) fully takes local quantum fluctuations into account but neglects any kind of spatial fluctuations. The many-body problem on the lattice is mapped onto an impurity problem, which needs to be solved self-consistently. In the last chapter of this thesis, Matrix-Product-States-based algorithms are used to solve the impurity problem of the dynamical mean-field theory. We present results for a Hubbard model on a one-dimensional lattice and on a Bethe lattice obtained by the dynamical mean-field and compare them with exact results.
Modeling open quantum systems---quantum systems coupled to a bath---is of value in condensed-matter theory, cavity quantum electrodynamics, nanosciences, and biophysics. The real-time simulation of open quantum systems was advanced significantly by the recent development of chain mapping techniques and the use of matrix product states that exploit the intrinsic entanglement structure in open quantum systems. The computational cost of simulating open quantum systems, however, remains high when the bath is excited to high-lying quantum states. We develop an approach to reduce the computational costs in such cases. The interaction representation for the open quantum system is used to distribute excitations among the bath degrees of freedom so that the occupation of each bath oscillator is ensured to be low. The interaction picture also causes the matrix dimensions to be much smaller in a matrix product state of a chain-mapped open quantum system than in the Schr\"odinger picture. Using the interaction representation accelerates the calculations by one to two orders of magnitude over the existing matrix-product-state method. In the regime of strong system-bath coupling and high temperatures, the speedup can be as large as three orders of magnitude. The approach developed here is especially promising to simulate the dynamics of open quantum systems in high-temperature and strong-coupling regimes.