Andreev et al.1 have shown that Brillouin-enhanced four-wave mixing can be used to achieve phase conjugation with high reflectivities (~106). In this paper we develop a theoretical model which effectively describes the four-wave mixing process and compare the results of this model with the experimental results we have obtained.
This thesis provides an in-depth study of the Brillouin interaction and how it can be exploited to enhance other nonlinear optical processes. The work begins with a detailed derivation of the equations of motion describing the stimulated Brillouin scattering (SBS) process. The derivation applies the principles of conservation of momentum and energy to a fluid particle in the medium, and evolves into a complete mathematical description of the SBS process including optical absorption and thermal effects. Predictions of the important parameters for this process, such as the SBS gain and reflectivity are given for the cases of a single and multimode laser. When using a multimode laser it is shown under what conditions the SBS gain and reflectivity are unaffected by the number of modes in the pump laser. Experiments carried out in this limit confirm the theoretical predictions. A novel scheme for combining SBS and conventional four-wave mixing into what is called Brillouin-enhanced four-wave mixing is discussed both theoretically and experimentally. This new geometry for producing a phase-conjugate signal is capable of combining the good features of both the SBS and four-wave mixing processes, while eliminating the undesirable features of these processes. This Brillouin-enhanced four-wave mixing process produces a phase-conjugate mirror with reflectivities greater than 100%, with no frequency shift on reflection, and produces a high-fidelity phase-conjugate signal even when using aberrated pump waves. Experimental verification of all these features is demonstrated. A phase-conjugate oscillator consisting of a conventional mirror and a phase-conjugate mirror based on Brillouin-enhanced four-wave mixing has been constructed. The beam divergence and near-field spot size of this oscillator has been measured for various cavity lengths and radii of curvature of the conventional mirror. A theoretical analysis of the mode structure of this oscillator has been performed assuming a Gaussian reflectivity profile for the phase-conjugate mirror. The beam-parameter measurements made on the experimental phase-conjugate oscillators are in good agreement with our theoretical analysis
We report on an investigation of Brillouin-enhanced four-wave mixing which provides phase conjugate reflectivities greater than 104. Theoretical modeling shows that the phase conjugate intensity grows with time until limited by pump depletion, and the main effect of varying the signal power is to increase the time delay before the conjugate beam reaches peak intensity. This is confirmed experimentally, and the maximum peak reflectivity is limited by the length of the laser pulses used in the experiment.
It has previously been shown that Brillouin enhanced four-wave mixing can lead to large phase conjugate reflectivities for moderate laser powers.1,2 However, in the geometry considered by previous workers the pumps have equal frequency and hence the conjugate signal is shifted in frequency with respect to the probe. We have conducted an experimental and theoretical study of Brillouin-enhanced four-wave mixing for the different case in which the two pump waves differ in frequency by twice the Brillouin frequency of the four-wave mixing medium, and in which the probe wave frequency is halfway between those of the pump waves. In this case, the phase conjugate wave has the same frequency as the probe. Reflectivities > 100 % have been measured. Experimental results are compared to those of a theory that includes the effects of phase mismatch, pump depletion, and the finite response time of the medium.
We report on a theoretical and modeling study of self-pumped four-wave mixing in a Brillouin medium. A theoretical analysis gives expressions for the threshold intensity and for the steady-state reflectivity at small input intensities. Operation over a range of input intensities is also investigated by using a computer model that predicts that, for high input intensities, the conjugate can become unstable and oscillate chaotically in time. Experimentally we observe phase conjugation with an input threshold 25 times less than that required for phase conjugation by stimulated Brillouin scattering.