Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Information and Computation

Efficient reversible quantum design of sig-magnitude to two's complement converters

Francisco José Orts, Gloria Ortega, Ester Martín Garzón

Published Aug 1, 2020• 2 citations
Publisher

Abstract

Despite the great interest that the scientific community has in quantum computing, the scarcity and high cost of resources prevent to advance in this field. Specifically, qubits are very expensive to build, causing the few available quantum computers are tremendously limited in their number of qubits and delaying their progress. This work presents new reversible circuits that optimize the necessary resources for the conversion of a sign binary number into two's complement of N digits. The benefits of our work are two: on the one hand, the proposed two's complement converters are fault tolerant circuits and also are more efficient in terms of resources (essentially, quantum cost, number of qubits, and T-count) than the described in the literature. On the other hand, valuable information about available converters and, what is more, quantum adders, is summarized in tables for interested researchers. The converters have been measured using robust metrics and have been compared with the state-of-the-art circuits. The code to build them in a real quantum computer is given.

DOI
10.26421/qic20.9-10-3

Related papers

Efficient design of a quantum absolute-value circuit using Clifford+T gates

Francisco José Orts, Gloria Ortega, Elías F. Combarro +3 more

Abstract Current quantum computers have a limited number of resources and are heavily affected by internal and external noise. Therefore, small, noise-tolerant circuits are of great interest. With regard to circuit size, it is especially important to reduce the number of required qubits. Concerning to fault-tolerance, circuits entirely built with Clifford+T gates allow the use of error correction codes. However, the T-gate has an excessive cost, so circuits with a high number of T-gates should be avoided. This work focuses on optimising in such terms an operation that is widely used in larger circuits and algorithms: the calculation of the absolute-value of two’s complement encoded integers. The proposed circuit halves the number of required T gates with respect to the best circuit currently available in the literature. Moreover, our circuit requires at least 2 qubits less than the other circuits for such an operation.

The Journal of Supercomputing•Mar 18, 2023•6 citations

A Resource-Efficient Design for a Reversible Floating Point Adder in Quantum Computing

Trung Duc Nguyen, Rodney Van Meter

Reversible logic has applications in low-power computing and quantum computing. However, there are few existing designs for reversible floating-point adders and none suitable for quantum computation. In this article, we propose a resource-efficient reversible floating-point adder, suitable for binary quantum computation, improving the design of Nachtigal et al. [2011]. Our work focuses on improving the reversible designs of the alignment unit and the normalization unit, which are the most expensive parts. By changing a few elements of the existing algorithm, including the circuit designs of the RLZC (reversible leading zero counter) and converter, we have reduced the cost by about 68%. We also propose quantum designs adapted to use gates from fault-tolerant libraries. The KQ for our fault-tolerant design is almost 60 times as expensive as for a 32-bit fixed-point addition. We note that the floating-point representation makes in-place, truly reversible arithmetic impossible, requiring us to retain both inputs, which limits the sustainability of its use for quantum computation.

ACM Journal on Emerging Technologies in Computing Systems•Nov 18, 2014•22 citations

A Low Quantum Cost Implementation of Reversible Binary-Coded-Decimal Adder

Sheba Diamond Thabah, Prabir Saha

The prediction and forthcoming of a quantum computer into the real-world is the much gained research area over the last decades, which initiated the usefulness and profit of reversible computation because of its potentiality to reduce power consumption in designing arithmetic circuits. In this paper, two design approaches are proposed for the design of a reversible Binary-Coded-Decimal adder. The first approach is implemented and realized from reversible gates proposed by researchers in the technical literature capable of breaking down into primitive quantum gates, whereas the second approach is realized from the existing synthesizable reversible gates only. Parallel implementations of such circuits have been carried out through the proper selection and arrangements of the gates to improve the reversible performance parameters. The proposed design approaches offer a low quantum cost along-with lower delay and hardware complexity for any n-digit addition. Analysis results of proposed design 1 show appreciable improvements over gate count, quantum cost, and delay by at least 9 %, 17 %, and 26 % respectively, whereas, the proposed design 2 show that the results significantly improve the parameters (gate count, quantum cost, and delay) by at least 45 %, 33 %, and 50 % respectively compared to existing counterparts found in the literature.

Periodica Polytechnica Electrical Engineering and Computer Science•Sep 14, 2020•2 citations

A Space-Efficient Design for Reversible Floating Point Adder in Quantum Computing

Nguyen, Trung Duc, Rodney Van Meter

Reversible logic has applications in low-power computing and quantum computing. However, there are few existing designs for reversible floating-point adders and none suitable for quantum computation. In this paper we propose a space-efficient reversible floating-point adder, suitable for binary quantum computation, improving the design of Nachtigal et al. Our work focuses on improving the reversible designs of the alignment unit and the normalization unit, which are the most expensive parts. By changing a few elements of the existing algorithm, including the circuit designs of the RLZC (reversible leading zero counter) and converter, we have reduced the cost about 68%. We also propose fault-tolerant designs for the circuits. The KQ for our fault-tolerant design is almost sixty times as expensive as for a 32-bit fixed-point addition. We note that the floating-point representation makes in-place, truly reversible arithmetic impossible, requiring us to retain both inputs, which limits the sustainability of its use for quantum computation.

arXiv:1306.3760•Jun 17, 2013•8 citations

Design of efficient reversible logic-based binary and BCD adder circuits

Himanshu Thapliyal, Nagarajan Ranganathan

Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.

arXiv:1712.02630•ACM Journal on Emerging Technologies in Computing Systems•Sep 1, 2013•111 citations

Novel Quaternary Quantum Reversible Half Adder and Full Adder Circuits

Abdollah Norouzi Doshanlou, Majid Haghparast, Mehdi Hosseinzadeh

One of the major problems in designing highly compact digital systems is the rate of power consumption and internal heat generated by the loss of information during the computation. The tendency of current circuit design technologies is towards Nanoscale. Quaternary reversible logic is an emerging technology for the future designing of the quantum systems since quantum reversible circuits can be realized in Nanoscales. The adder building block is an essential part of any computer system. This block must be designed efficiently. We proposed a new quaternary quantum reversible half adder with the quantum cost of 17 and a quaternary quantum reversible full adder with a quantum cost of 23. For the first time in the literature, we report that we proposed quaternary quantum reversible half adder as well as full adder with an optimum number of constant inputs. As the circuit lines in the domain of quantum computation are considered to be a very limited resource, the achievements in this paper are promising. The proposed circuits are efficient in terms of all figures of merits in comparison to the existing counterparts. To design these adder circuits, we used 1-qudit and 2-qudit quaternary gates.

IETE Journal of Research•Aug 29, 2019•12 citations
Despite the great interest that the scientific community has in quantum computing, the scarcity and high cost of resources prevent to advance in this field. Specifically, qubits are very expensive to build, causing the few available quantum computers are tremendously limited in their number of qubits and delaying their progress. This work presents new reversible circuits that optimize the necessary resources for the conversion of a sign binary number into two's complement of N digits. The benefits of our work are two: on the one hand, the proposed two's complement converters are fault tolerant circuits and also are more efficient in terms of resources (essentially, quantum cost, number of qubits, and T-count) than the described in the literature. On the other hand, valuable information about available converters and, what is more, quantum adders, is summarized in tables for interested researchers. The converters have been measured using robust metrics and have been compared with the state-of-the-art circuits. The code to build them in a real quantum computer is given.
Abstract Current quantum computers have a limited number of resources and are heavily affected by internal and external noise. Therefore, small, noise-tolerant circuits are of great interest. With regard to circuit size, it is especially important to reduce the number of required qubits. Concerning to fault-tolerance, circuits entirely built with Clifford+T gates allow the use of error correction codes. However, the T-gate has an excessive cost, so circuits with a high number of T-gates should be avoided. This work focuses on optimising in such terms an operation that is widely used in larger circuits and algorithms: the calculation of the absolute-value of two’s complement encoded integers. The proposed circuit halves the number of required T gates with respect to the best circuit currently available in the literature. Moreover, our circuit requires at least 2 qubits less than the other circuits for such an operation.
Reversible logic has applications in low-power computing and quantum computing. However, there are few existing designs for reversible floating-point adders and none suitable for quantum computation. In this article, we propose a resource-efficient reversible floating-point adder, suitable for binary quantum computation, improving the design of Nachtigal et al. [2011]. Our work focuses on improving the reversible designs of the alignment unit and the normalization unit, which are the most expensive parts. By changing a few elements of the existing algorithm, including the circuit designs of the RLZC (reversible leading zero counter) and converter, we have reduced the cost by about 68%. We also propose quantum designs adapted to use gates from fault-tolerant libraries. The KQ for our fault-tolerant design is almost 60 times as expensive as for a 32-bit fixed-point addition. We note that the floating-point representation makes in-place, truly reversible arithmetic impossible, requiring us to retain both inputs, which limits the sustainability of its use for quantum computation.
The prediction and forthcoming of a quantum computer into the real-world is the much gained research area over the last decades, which initiated the usefulness and profit of reversible computation because of its potentiality to reduce power consumption in designing arithmetic circuits. In this paper, two design approaches are proposed for the design of a reversible Binary-Coded-Decimal adder. The first approach is implemented and realized from reversible gates proposed by researchers in the technical literature capable of breaking down into primitive quantum gates, whereas the second approach is realized from the existing synthesizable reversible gates only. Parallel implementations of such circuits have been carried out through the proper selection and arrangements of the gates to improve the reversible performance parameters. The proposed design approaches offer a low quantum cost along-with lower delay and hardware complexity for any n-digit addition. Analysis results of proposed design 1 show appreciable improvements over gate count, quantum cost, and delay by at least 9 %, 17 %, and 26 % respectively, whereas, the proposed design 2 show that the results significantly improve the parameters (gate count, quantum cost, and delay) by at least 45 %, 33 %, and 50 % respectively compared to existing counterparts found in the literature.
Reversible logic has applications in low-power computing and quantum computing. However, there are few existing designs for reversible floating-point adders and none suitable for quantum computation. In this paper we propose a space-efficient reversible floating-point adder, suitable for binary quantum computation, improving the design of Nachtigal et al. Our work focuses on improving the reversible designs of the alignment unit and the normalization unit, which are the most expensive parts. By changing a few elements of the existing algorithm, including the circuit designs of the RLZC (reversible leading zero counter) and converter, we have reduced the cost about 68%. We also propose fault-tolerant designs for the circuits. The KQ for our fault-tolerant design is almost sixty times as expensive as for a 32-bit fixed-point addition. We note that the floating-point representation makes in-place, truly reversible arithmetic impossible, requiring us to retain both inputs, which limits the sustainability of its use for quantum computation.
Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.
One of the major problems in designing highly compact digital systems is the rate of power consumption and internal heat generated by the loss of information during the computation. The tendency of current circuit design technologies is towards Nanoscale. Quaternary reversible logic is an emerging technology for the future designing of the quantum systems since quantum reversible circuits can be realized in Nanoscales. The adder building block is an essential part of any computer system. This block must be designed efficiently. We proposed a new quaternary quantum reversible half adder with the quantum cost of 17 and a quaternary quantum reversible full adder with a quantum cost of 23. For the first time in the literature, we report that we proposed quaternary quantum reversible half adder as well as full adder with an optimum number of constant inputs. As the circuit lines in the domain of quantum computation are considered to be a very limited resource, the achievements in this paper are promising. The proposed circuits are efficient in terms of all figures of merits in comparison to the existing counterparts. To design these adder circuits, we used 1-qudit and 2-qudit quaternary gates.