Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Characterization of quantum states and detectors

Rajveer Nehra, Miller Eaton, Kevin Valson Jacob, Carlos González-Arciniegas, M. S. Kim, Adriana E. Lita, Thomas Gerrits, Sae Woo Nam, Olivier Pfister

Published Aug 25, 2020• 0 citations
Publisher

Abstract

Characterization of quantum states and detectors is a key task in rapidly emerging optical quantum science and technology. First, we introduce and experimentally demonstrate a noise-robust quantum state characterization protocol using photon-number-resolving (PNR) measurements. Unlike conventional continuous variable state tomography methods, our method utilizes computationally efficient semi-definite programming (SDP) and can be used to accurately reconstruct the state even after loss a known loss. The protocol is demonstrated for a weak coherent state as well as a single-photon Fock state. Next, we propose a method for characterizing a photodetector by directly reconstructing the Wigner functions of the detector’s Positive-Operator-Value-Measure (POVM) elements via weak-field homodyne technique. We also report our experimental progress on characterizing a superconducting transition-edge sensor for PNR measurements.

DOI
10.1117/12.2568143

Related papers

Quantum state engineering and state tomography using photon-number-resolving measurements (Conference Presentation)

Rajveer Nehra, Aye Win, Miller Eaton +6 more

Quantum state engineering and state characterization is a key task in quantum information processing in both discrete and continuous variable systems in the optical domain. In particular, quantum states with non-Gaussian (i.e., non-positive) Wigner quasiprobability distribution functions are crucial to universal, fault-tolerant quantum computing with continuous variables. In this talk, we present our recent results on single-photon Fock state tomography using Photon-Number-Resolving (PNR) measurements. We generated a highly pure narrow-band single-photon Fock state by heralding cavity-enhanced spontaneous-parametric-downconversion from a PPKTP optical parametric oscillator. The Wigner function was reconstructed with photon statistics obtained using superconducting transition-edge sensors with an overall system efficiency of 58(2)%. We then discuss quantum state engineering for pure displaced single-photon Fock states, optical cat states, and approximate GKP states using coherent states and single-photon states along with linear optics and PNR measurements. We report our experimental progress for the same.

Quantum Communications and Quantum Imaging•Sep 10, 2019•0 citations

Experimental techniques for continuous variable photonic quantum information

Hendrik B. Coldenstrodt-Ronge

Quantum optics is central to emerging quantum technologies such as quantum metrology and quantum information. The continuous variable (CV) approach to encoding information in a physical system, for example the electromagnetic field quadratures has significant advantages over discrete variables (DV) encoding. CV offers higher density encoding in a single optical state and on-demand state preparation for example. However, techniques for CV preparation, manipulation and measurement are not as well developed as the corresponding DV approach. In this thesis we present methods to characterize quantum detectors that operate in the CV regime, and discuss their application to CV state preparation. A quantum detector is described by its positive operator valued measure (POVM) set, with one operator for each measurement outcome. We present an experimental scheme for detector tomography, that is reconstruction of the POVM set of an unknown detector by means of measurement outcomes for a set of tomographically complete input states. We use this scheme to experimentally determine the POVM set of an avalanche photodiode (APD) and a time-multiplexed-detector (TMD) and compare the results to models of the detectors. We introduce a weak-homodyne photon-number-resolving detector (PNRD) , which uses a weak local oscillator beam to set a phase reference for the detection process. We develop a theoretical description of the sensitivity regimes for this detector using the Wigner phase space picture. We also present experimental detector tomography for a weak-homodyne detector based on two APDs. In many cases it is sufficient to calibrate the efficiencies of previously characterized PNRDs. We experimentally demonstrate a scheme using correlated photons produced by spontaneous parametric downconversion (SPDC) to determine the efficiencies of PNRDs, based on the photon number statistics of the source. The same SPDC source is also used to demonstrate preparation of photonic states in the photon number basis and for a first proof-of-principle experiment with a weak-homodyne PNRD based on a TMD.

•Jan 1, 2011•0 citations

Preparing and characterizing quantum states of light using photon-number-resolving detectors

Guillaume Thekkadath

A longstanding goal in quantum optics has been to realize a photon-number-resolving detector that efficiently counts the number of photons in an optical field. This goal has been largely met with the development of transition edge sensors which can count up to roughly 20 photons with efficiencies over 95%. This thesis presents three experiments that employ these detectors to characterize and prepare quantum states of light. Firstly, we develop a weak-field homodyne detector. By replacing the photodiodes conventionally used in homodyne detection with transition edge sensors, we experimentally implement a versatile measurement device that can tune between photon counting and quadrature measurements. We study the transition between these complementary measurement regimes and determine the minimum local oscillator strength needed to perform quadrature measurements. Secondly, we use the weak-field homodyne detector as a quantum state engineering tool. We propose a scheme to prepare a wide range of definite parity states, including two- and four-component Schrödinger cat states of arbitrary size with nearly perfect fidelity. Thirdly, we perform optical interferometry using quantum states of light with the aim of surpassing the maximal precision achievable with classical light, i.e. the shot-noise limit. We propose and experimentally implement a scheme that uses high-gain squeezed vacuum sources and transition edge sensors to prepare loss-tolerant entangled states containing up to 8 photons. While our achieved precision does not unconditionally (i.e. without post-selecting on certain measurement trials) surpass the shot-noise limit, our results do demonstrate the robustness of these entangled states to loss despite their size.

•Jan 1, 2020•0 citations

Characterizing Quantum Detectors by Wigner Functions

Rajveer Nehra, Kevin Valson Jacob, Miller Eaton +1 more

We propose a scheme for characterizing a photodetector by directly reconstructing the Wigner functions of the detector’s Positive-Operator-Valued Measure (POVM) elements, using displaced thermal mixtures as probes. We report our experimental progress on characterizing a superconducting transition-edge sensor.

arXiv:1909.10628•OSA Quantum 2.0 Conference•Jan 1, 2020•4 citations

Some recent progresses in quantum tomography realised at INRIM

Fabrizio Piacentini, Elizabeth A. Goldschmidt, M. G. Mingolla +13 more

We present some Quantum Tomography related results recently obtained in the Quantum Optics labs of the National Institute of Metrological Research (INRIM). Initially we describe the first experimental implementation of a new protocol for the reconstruction of a photon-number-resolving (PNR) detector’s POVM (Positive Operator-Valued Measure): such a protocol, exploiting the strong quantum correlations of an ancillary state, results more robust and efficient than its classical counterparts. The second part of the paper focuses on the quantum characterization of a transition-edge sensor (TES) based PNR detector, i.e. the experimental tomography of the POVM of a TES, with a method based on a quorum of coherent probes: we show the reconstruction of the POVM elements up to 11 detected photons and 100 incoming photons, demonstrating the linearity of such a device. Finally, we present a method for the experimental reconstruction of the modal structure of multimode optical fields exploiting a single measurement of higher-order photon number autocorrelation functions. We show our reconstructions of up to three different modes per optical state, demonstrating the excellent agreement with the theoretical predictions and the robustness of our method itself.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 26, 2013•1 citation

Quantum Characterization of Single Photon Detectors

M. G. Mingolla

The research activities described in this thesis have basically an experimental profile, and were realized in the Quantum Optics Laboratories of the Optic Division in the Istituto Nazionale di Ricerca Metrologica (I.N.Ri.M.). The experiments presented here are oriented to the characterization of single- and few-photon detectors calibration, exploiting quantum properties. The first chapter has an introductory character, oriented to the study of nonlinear optics phenomena and focused in the spontaneous parametric down conversion (PDC) process. After the quantization of the free electromagnetic field, we recall the quantum theory of PDC. In the second chapter the Klyshko's two-photon calibration technique is presented and applied to an Avalanche Photo Diode (APD) based single photon counting module. Chapter three is an introduction to quantum measurements and quantum operation theories where the concept of positive-operator valued measurement (POVM) is presented. In chapter four, the quantum characterization of a true photon-number resolving detector (PNRD) based on a transition edge sensor (TES) is presented. In this experiment, the POVM of the TES is reconstructed by realizing a tomography of the detection process's quantum operation, using as a probe a set of known coherent states. In the fifth and last chapter, the POVM of a tree type PNRD is reconstructed exploiting strong quantum correlations of PDC twin beams

•Jan 1, 2014•0 citations
Characterization of quantum states and detectors is a key task in rapidly emerging optical quantum science and technology. First, we introduce and experimentally demonstrate a noise-robust quantum state characterization protocol using photon-number-resolving (PNR) measurements. Unlike conventional continuous variable state tomography methods, our method utilizes computationally efficient semi-definite programming (SDP) and can be used to accurately reconstruct the state even after loss a known loss. The protocol is demonstrated for a weak coherent state as well as a single-photon Fock state.
Next, we propose a method for characterizing a photodetector by directly reconstructing the Wigner functions of the detector’s Positive-Operator-Value-Measure (POVM) elements via weak-field homodyne technique. We also report our experimental progress on characterizing a superconducting transition-edge sensor for PNR measurements.
Quantum state engineering and state characterization is a key task in quantum information processing in both discrete and continuous variable systems in the optical domain. In particular, quantum states with non-Gaussian (i.e., non-positive) Wigner quasiprobability distribution functions are crucial to universal, fault-tolerant quantum computing with continuous variables. In this talk, we present our recent results on single-photon Fock state tomography using Photon-Number-Resolving (PNR) measurements. We generated a highly pure narrow-band single-photon Fock state by heralding cavity-enhanced spontaneous-parametric-downconversion from a PPKTP optical parametric oscillator. The Wigner function was reconstructed with photon statistics obtained using superconducting transition-edge sensors with an overall system efficiency of 58(2)%. We then discuss quantum state engineering for pure displaced single-photon Fock states, optical cat states, and approximate GKP states using coherent states and single-photon states along with linear optics and PNR measurements. We report our experimental progress for the same.
Quantum optics is central to emerging quantum technologies such as quantum metrology and quantum information. The continuous variable (CV) approach to encoding information in a physical system, for example the electromagnetic field quadratures has significant advantages over discrete variables (DV) encoding. CV offers higher density encoding in a single optical state and on-demand state preparation for example. However, techniques for CV preparation, manipulation and measurement are not as well developed as the corresponding DV approach. In this thesis we present methods to characterize quantum detectors that operate in the CV regime, and discuss their application to CV state preparation. A quantum detector is described by its positive operator valued measure (POVM) set, with one operator for each measurement outcome. We present an experimental scheme for detector tomography, that is reconstruction of the POVM set of an unknown detector by means of measurement outcomes for a set of tomographically complete input states. We use this scheme to experimentally determine the POVM set of an avalanche photodiode (APD) and a time-multiplexed-detector (TMD) and compare the results to models of the detectors. We introduce a weak-homodyne photon-number-resolving detector (PNRD) , which uses a weak local oscillator beam to set a phase reference for the detection process. We develop a theoretical description of the sensitivity regimes for this detector using the Wigner phase space picture. We also present experimental detector tomography for a weak-homodyne detector based on two APDs. In many cases it is sufficient to calibrate the efficiencies of previously characterized PNRDs. We experimentally demonstrate a scheme using correlated photons produced by spontaneous parametric downconversion (SPDC) to determine the efficiencies of PNRDs, based on the photon number statistics of the source. The same SPDC source is also used to demonstrate preparation of photonic states in the photon number basis and for a first proof-of-principle experiment with a weak-homodyne PNRD based on a TMD.
A longstanding goal in quantum optics has been to realize a photon-number-resolving detector that efficiently counts the number of photons in an optical field. This goal has been largely met with the development of transition edge sensors which can count up to roughly 20 photons with efficiencies over 95%. This thesis presents three experiments that employ these detectors to characterize and prepare quantum states of light. Firstly, we develop a weak-field homodyne detector. By replacing the photodiodes conventionally used in homodyne detection with transition edge sensors, we experimentally implement a versatile measurement device that can tune between photon counting and quadrature measurements. We study the transition between these complementary measurement regimes and determine the minimum local oscillator strength needed to perform quadrature measurements. Secondly, we use the weak-field homodyne detector as a quantum state engineering tool. We propose a scheme to prepare a wide range of definite parity states, including two- and four-component Schrödinger cat states of arbitrary size with nearly perfect fidelity. Thirdly, we perform optical interferometry using quantum states of light with the aim of surpassing the maximal precision achievable with classical light, i.e. the shot-noise limit. We propose and experimentally implement a scheme that uses high-gain squeezed vacuum sources and transition edge sensors to prepare loss-tolerant entangled states containing up to 8 photons. While our achieved precision does not unconditionally (i.e. without post-selecting on certain measurement trials) surpass the shot-noise limit, our results do demonstrate the robustness of these entangled states to loss despite their size.
We present some Quantum Tomography related results recently obtained in the Quantum Optics labs of the National Institute of Metrological Research (INRIM). Initially we describe the first experimental implementation of a new protocol for the reconstruction of a photon-number-resolving (PNR) detector’s POVM (Positive Operator-Valued Measure): such a protocol, exploiting the strong quantum correlations of an ancillary state, results more robust and efficient than its classical counterparts. The second part of the paper focuses on the quantum characterization of a transition-edge sensor (TES) based PNR detector, i.e. the experimental tomography of the POVM of a TES, with a method based on a quorum of coherent probes: we show the reconstruction of the POVM elements up to 11 detected photons and 100 incoming photons, demonstrating the linearity of such a device. Finally, we present a method for the experimental reconstruction of the modal structure of multimode optical fields exploiting a single measurement of higher-order photon number autocorrelation functions. We show our reconstructions of up to three different modes per optical state, demonstrating the excellent agreement with the theoretical predictions and the robustness of our method itself.
The research activities described in this thesis have basically an experimental profile, and were realized in the Quantum Optics Laboratories of the Optic Division in the Istituto Nazionale di Ricerca Metrologica (I.N.Ri.M.). The experiments presented here are oriented to the characterization of single- and few-photon detectors calibration, exploiting quantum properties. The first chapter has an introductory character, oriented to the study of nonlinear optics phenomena and focused in the spontaneous parametric down conversion (PDC) process. After the quantization of the free electromagnetic field, we recall the quantum theory of PDC. In the second chapter the Klyshko's two-photon calibration technique is presented and applied to an Avalanche Photo Diode (APD) based single photon counting module. Chapter three is an introduction to quantum measurements and quantum operation theories where the concept of positive-operator valued measurement (POVM) is presented. In chapter four, the quantum characterization of a true photon-number resolving detector (PNRD) based on a transition edge sensor (TES) is presented. In this experiment, the POVM of the TES is reconstructed by realizing a tomography of the detection process's quantum operation, using as a probe a set of known coherent states. In the fifth and last chapter, the POVM of a tree type PNRD is reconstructed exploiting strong quantum correlations of PDC twin beams