Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Europhysics Letters (EPL)

Microwave photon detection scheme based on hybrid cavity system

Junwen Luo, Dewei Wu, Qiang Miao, Tianli Wei

Published Jul 28, 2020• 2 citations
Publisher

Abstract

We present a microwave photon detection scheme based on wavelength conversion in hybrid cavity system (electro-opto-mechanical converter). By converting microwave pulse into optical pulse efficiently, tough microwave photon detection can be switched to convenient optical photon detection. We demonstrate that a theoretical detection efficiency analogous to optical detection efficiency can be reached by selecting proper parameters. Pulse shapes of both wavelengths match well. Furthermore, we enhance the scheme by applying the Josephson parametric amplifier (JPA) and optical parametric amplifier (OPA) in the respective cavity, and we obtain a maximum detection efficiency enhancement of near 41% compared to the non-amplification case.

DOI
10.1209/0295-5075/131/14001

Related papers

Microwave Photodetection with Electro-Opto-Mechanical Systems

Shabir Barzanjeh, M. C. de Oliveira, Stefano Pirandola

While detection of optical photons is today achieved with very high efficiencies, the detection of microwave fields at the photon level still poses non-trivial experimental challenges. In this Letter we propose a model of microwave photodetector which is based on the use of an electro-opto-mechanical system. Using state of the art technology, we show how single microwave photons can efficiently be converted into optical photons which are then measured by standard optics. The overall quantum efficiency of our microwave detector tends to one for achievable values of the optical and microwave cooperativity parameters. Our scheme could be used for sensing and scanning very faint microwave fields, as they may occur in radio astronomy, satellite and deep space communications.

arXiv:1410.4024•Oct 15, 2014•10 citations

Squeezing and entanglement features in parametrically enhanced cavity electro-opto-mechanical converter

Junwen Luo, Dewei Wu, Qiang Miao +1 more

A scheme of parametrically enhanced cavity electro-opto-mechanical converter is proposed in this paper, which utilizes Josephson parametric amplifier and optical parametric amplifier. Basic principles of typical cavity electro-opto-mechanical converter and parametrically enhanced version are introduced briefly. We have probed the squeezing and microwave-optical entanglement performance of the scheme with one or both of the amplifiers. The Wigner distribution of the optical output is obtained to analyze the squeezing effect. Meanwhile, quadrature variances and time domain waveforms of output signals are compared and discussed. The results show that microwave-optical entanglement has been enhanced via nonlinear parametric effects no matter when there is one or two amplifiers. However, single mode squeezing only occurs in the cavity which the amplifier is placed in, and this squeezing effect would not transmit to another cavity which hasn’t been amplified. When both amplifiers are introduced simultaneously, each output of cavity electro-opto-mechanical converter is squeezed independently. Our research provides another way to prepare squeezed microwave or optical signal and proves that microwave-optical entanglement can be well enhanced by introducing parametric amplifiers.

Results in Physics•May 25, 2020•3 citations

The microwave quantum frequency conversion via mechanical mode

Jihwan Kim, Sangwoo Jeon, Zaeill Kim +3 more

The quantum frequency conversion plays important roles in quantum technologies. Various systems can be implemented to transfer frequency of the photon into another frequencies. We investigate the microwave bandwidth frequency conversion by utilizing mechanical mode. The system of the device to be investigated is cavity electromechanical system. We theoretically analyze the system to obtain the optimal parameters. To realize this system, we fabricate the superconducting cavity electromechanical device. Also, microwave photon to be converted is squeezed vacuum state generated by Josephson parametric amplifier.

Quantum Communications and Quantum Imaging•Aug 8, 2023•0 citations

Enhanced Microwave-Optical Conversion Via Ancillary Electro-Mechanical Coupling

Tianli Wei, Dewei Wu, Qiang Miao +1 more

Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.

Results in Physics•Jan 1, 2021•1 citation

Photon conversion integrated

Christiana Varnava

Efficient conversion between microwave and optical photons is important for the development of hybrid quantum platforms in which quantum information is processed by superconducting circuits and transmitted with optical photons. A promising approach is to use electro-optic modulation with a microwave cavity coupled to an optical cavity, where microwave photons are up-converted to optical photons through sum frequency generation, and optical photons are converted to microwave photons through difference frequency generation. However, the frequency matching conditions in such set-ups usually require the size of the device to be large enough so that the optical frequencies of the pump and signal photons are supported. Hong Tang and colleagues have now fabricated a hybrid superconducting–photonic device that overcomes this limitation by using an integrated planar geometry to coherently convert between microwave and optical photons. adapted under a Creative Commons license CC BY-NC 4.0 ; AAAS

Nature Electronics•Sep 7, 2018•0 citations

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Optica•Jan 20, 2026•1 citation
We present a microwave photon detection scheme based on wavelength conversion in hybrid cavity system (electro-opto-mechanical converter). By converting microwave pulse into optical pulse efficiently, tough microwave photon detection can be switched to convenient optical photon detection. We demonstrate that a theoretical detection efficiency analogous to optical detection efficiency can be reached by selecting proper parameters. Pulse shapes of both wavelengths match well. Furthermore, we enhance the scheme by applying the Josephson parametric amplifier (JPA) and optical parametric amplifier (OPA) in the respective cavity, and we obtain a maximum detection efficiency enhancement of near 41% compared to the non-amplification case.
While detection of optical photons is today achieved with very high efficiencies, the detection of microwave fields at the photon level still poses non-trivial experimental challenges. In this Letter we propose a model of microwave photodetector which is based on the use of an electro-opto-mechanical system. Using state of the art technology, we show how single microwave photons can efficiently be converted into optical photons which are then measured by standard optics. The overall quantum efficiency of our microwave detector tends to one for achievable values of the optical and microwave cooperativity parameters. Our scheme could be used for sensing and scanning very faint microwave fields, as they may occur in radio astronomy, satellite and deep space communications.
A scheme of parametrically enhanced cavity electro-opto-mechanical converter is proposed in this paper, which utilizes Josephson parametric amplifier and optical parametric amplifier. Basic principles of typical cavity electro-opto-mechanical converter and parametrically enhanced version are introduced briefly. We have probed the squeezing and microwave-optical entanglement performance of the scheme with one or both of the amplifiers. The Wigner distribution of the optical output is obtained to analyze the squeezing effect. Meanwhile, quadrature variances and time domain waveforms of output signals are compared and discussed. The results show that microwave-optical entanglement has been enhanced via nonlinear parametric effects no matter when there is one or two amplifiers. However, single mode squeezing only occurs in the cavity which the amplifier is placed in, and this squeezing effect would not transmit to another cavity which hasn’t been amplified. When both amplifiers are introduced simultaneously, each output of cavity electro-opto-mechanical converter is squeezed independently. Our research provides another way to prepare squeezed microwave or optical signal and proves that microwave-optical entanglement can be well enhanced by introducing parametric amplifiers.
The quantum frequency conversion plays important roles in quantum technologies. Various systems can be implemented to transfer frequency of the photon into another frequencies. We investigate the microwave bandwidth frequency conversion by utilizing mechanical mode. The system of the device to be investigated is cavity electromechanical system. We theoretically analyze the system to obtain the optimal parameters. To realize this system, we fabricate the superconducting cavity electromechanical device. Also, microwave photon to be converted is squeezed vacuum state generated by Josephson parametric amplifier.
Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.
Efficient conversion between microwave and optical photons is important for the development of hybrid quantum platforms in which quantum information is processed by superconducting circuits and transmitted with optical photons. A promising approach is to use electro-optic modulation with a microwave cavity coupled to an optical cavity, where microwave photons are up-converted to optical photons through sum frequency generation, and optical photons are converted to microwave photons through difference frequency generation. However, the frequency matching conditions in such set-ups usually require the size of the device to be large enough so that the optical frequencies of the pump and signal photons are supported. Hong Tang and colleagues have now fabricated a hybrid superconducting–photonic device that overcomes this limitation by using an integrated planar geometry to coherently convert between microwave and optical photons. adapted under a Creative Commons license CC BY-NC 4.0 ; AAAS
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.