Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Selected Topics in Quantum Electronics

Theoretical Demonstration of 250 Gb/s Ultrafast All-Optical Memory Using Mach-Zehnder Interferometers With Quantum-Dot Semiconductor Optical Amplifiers

Amer Kotb, Chunlei Guo

Published Oct 21, 2019• 10 citations
Publisher

Abstract

Ultrafast all-optical memory at 250 Gb/s using Mach-Zehnder interferometers (MZIs) with symmetrical quantum-dot semiconductor optical amplifiers (QDSOAs), acting as all-optical AND gate and regenerator in a loop configuration, is theoretically demonstrated for 500 loop circulations using a return-to-zero modulated format. The memory operation is examined and evaluated by the quality factor (QF), which is a more sensitive method of measuring memory quality. The obtained numerical results show that the proposed memory can be operated up to 250 Gb/s for 500 circulations with high QF.

DOI
10.1109/jstqe.2019.2948051

Related papers

Ultra-Fast All-Optical Memory based on Quantum Dot Semiconductor Optical Amplifiers (QD-SOA)

Yossef Ben Ezra, Boris I. Lembrikov

All-optical signal processing is characterized by high bit-rate, power efficiency, high bandwidth, and transparency. All-optical logic gates are basic logic units for the all-optical signal processing implementation. Typically, all-optical gates are based on strong optical nonlinearities related in particular to semiconductor optical amplifiers (SOA). We briefly review the state of art in the field of all-optical logic gates and all-optical memory. In the original part, we discuss the ultrafast all-optical memory loop based on the Mach-Zehnder interferometer (MZI) with quantum dot (QD) semiconductor optical amplifier (SOA) in each arm.

InTech eBooks•Jun 21, 2017•3 citations

Ultrafast all-optical memory operation using a polarization bistable VCSEL

Hitoshi Kawaguchi

The fastest operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 26-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations had optical gain.

International Conference on Transparent Optical Networks•Jun 1, 2010•2 citations

All-optical memory operation of 980-nm polarization bistable VCSEL for 20-Gb/s PRBS RZ and 40-Gb/s NRZ data signals

Jun Sakaguchi, Takeo Katayama, Hitoshi Kawaguchi

The fastest known operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 2(6)-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations required 250-microW data signal power and had optical gain. The high potential of all-optical flip-flop memories based on polarization bistable VCSELs for use in ultrafast all-optical future networks was demonstrated.

Optics Express•May 26, 2010•53 citations

Fast Light in Quantum Dot and Well Semiconductor Optical Amplifiers

Connie J. Chang-Hasnain, P. Bhattacharya, S. L. Chuang

Abstract : Slow and fast light schemes are attractive for many applications including optical signal processing and RF phased array antennas. Semiconductor based schemes offer electrical control of velocity at very high bandwidths in an extremely compact device. Further they operate at room temperature and can be easily integrated into various optical systems. In this program, we used ultrafast nonlinearities in semiconductor optical amplifiers (SOAs) to achieve tunable time shifts at THz frequencies. In particular, we leveraged the spectral hole burning phenomena and demonstrated fast light in quantum well (QW) and quantum dot (QD) SOAs. The research included both theoretical and experimental efforts. Theoretical work was developed to understand and simulate experimental results and to optimize device designs. We introduced a novel pulse compression technique to reduce the pulse width to 100 fs to efficiently use ultra-fast nonlinearities in SOAs to achieve a large and cascadable delay. We implemented a novel chirped pulse scheme and obtained the largest advance-pulse-product of 10.7 with THz bandwidth. We demonstrated slow and fast light with GHz RF signal in QW/QD SOAs using coherent population oscillation and four-wave mixing. We also demonstrated cascaded SOAs in a loop to scale up the delay/advance.

•Oct 31, 2010•0 citations

High speed all-optical encryption and decryption using quantum dot semiconductor optical amplifiers

Wenbo Li, Hongyu Hu, NILOY KUMAR DUTTA

A scheme to realize high speed all-optical encryption and decryption using key-stream generators and an XOR gate based on quantum dot semiconductor optical amplifiers (QD-SOAs) was studied. The key used for encryption and decryption is a high speed all-optical pseudorandom bit sequence (PRBS) which is generated by a linear feedback shift register (LFSR) composed of QD-SOA-based logic XOR and AND gates. Two other kinds of more secure key-stream generators, i.e. cascaded design and parallel design, were also designed and investigated. Nonlinear dynamics including carrier heating and spectral hole-burning in the QD-SOA are taken into account together with the rate equations in order to realize all-optical logic operations. Results show that this scheme can realize all-optical encryption and decryption by using key-stream generators at high speed (~250 Gb/s).

Journal of Modern Optics•Nov 1, 2013•28 citations

Mach-Zehnder interferometer based design of all optical reversible binary adder

Saurabh Kotiyal, Himanshu Thapliyal, Nagarajan Ranganathan

In recent years reversible logic has emerged as a promising computing model for applications in dissipation less optical computing, low power CMOS, quantum computing, etc. In reversible circuits there exist a one-to-one mapping between the inputs and the outputs resulting in no loss of information. Researchers have implemented reversible logic gates in optical computing domain as it can provide high speed and low energy requirement along with easy fabrication at the chip level [1]. The all optical implementation of reversible gates are based on semiconductor optical amplifier (SOA) based Mach-Zehnder interferometer (MZI) due to its significant advantages such as high speed, low power, fast switching time and ease in fabrication. In this work we present the all optical implementation of an n bit reversible ripple carry adder for the first time in literature. The all optical reversible adder design is based on two new optical reversible gates referred as optical reversible gate I (ORG-I) and optical reversible gate II (ORG-II) and the existing all optical Feynman gate. The two new reversible gates ORG-I and ORGI-I are proposed as they can implement a reversible adder with reduced optical cost which is the measure of number of MZIs switches and the propagation delay, and with zero overhead in terms of number of ancilla inputs and the garbage outputs. The proposed all optical reversible adder design based on the ORG-I and ORG-II reversible gates are compared and shown to be better than the other existing designs of reversible adder proposed in non-optical domain in terms of number of MZIs, delay, number of ancilla inputs and the garbage outputs. The proposed all optical reversible ripple carry adder will be a key component of an all optical reversible ALU that can be applied in a wide variety of optical signal processing applications.

Design, Automation, and Test in Europe•Mar 1, 2012•47 citations
Ultrafast all-optical memory at 250 Gb/s using Mach-Zehnder interferometers (MZIs) with symmetrical quantum-dot semiconductor optical amplifiers (QDSOAs), acting as all-optical AND gate and regenerator in a loop configuration, is theoretically demonstrated for 500 loop circulations using a return-to-zero modulated format. The memory operation is examined and evaluated by the quality factor (QF), which is a more sensitive method of measuring memory quality. The obtained numerical results show that the proposed memory can be operated up to 250 Gb/s for 500 circulations with high QF.
All-optical signal processing is characterized by high bit-rate, power efficiency, high bandwidth, and transparency. All-optical logic gates are basic logic units for the all-optical signal processing implementation. Typically, all-optical gates are based on strong optical nonlinearities related in particular to semiconductor optical amplifiers (SOA). We briefly review the state of art in the field of all-optical logic gates and all-optical memory. In the original part, we discuss the ultrafast all-optical memory loop based on the Mach-Zehnder interferometer (MZI) with quantum dot (QD) semiconductor optical amplifier (SOA) in each arm.
The fastest operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 26-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations had optical gain.
The fastest known operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 2(6)-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations required 250-microW data signal power and had optical gain. The high potential of all-optical flip-flop memories based on polarization bistable VCSELs for use in ultrafast all-optical future networks was demonstrated.
Abstract : Slow and fast light schemes are attractive for many applications including optical signal processing and RF phased array antennas. Semiconductor based schemes offer electrical control of velocity at very high bandwidths in an extremely compact device. Further they operate at room temperature and can be easily integrated into various optical systems. In this program, we used ultrafast nonlinearities in semiconductor optical amplifiers (SOAs) to achieve tunable time shifts at THz frequencies. In particular, we leveraged the spectral hole burning phenomena and demonstrated fast light in quantum well (QW) and quantum dot (QD) SOAs. The research included both theoretical and experimental efforts. Theoretical work was developed to understand and simulate experimental results and to optimize device designs. We introduced a novel pulse compression technique to reduce the pulse width to 100 fs to efficiently use ultra-fast nonlinearities in SOAs to achieve a large and cascadable delay. We implemented a novel chirped pulse scheme and obtained the largest advance-pulse-product of 10.7 with THz bandwidth. We demonstrated slow and fast light with GHz RF signal in QW/QD SOAs using coherent population oscillation and four-wave mixing. We also demonstrated cascaded SOAs in a loop to scale up the delay/advance.
A scheme to realize high speed all-optical encryption and decryption using key-stream generators and an XOR gate based on quantum dot semiconductor optical amplifiers (QD-SOAs) was studied. The key used for encryption and decryption is a high speed all-optical pseudorandom bit sequence (PRBS) which is generated by a linear feedback shift register (LFSR) composed of QD-SOA-based logic XOR and AND gates. Two other kinds of more secure key-stream generators, i.e. cascaded design and parallel design, were also designed and investigated. Nonlinear dynamics including carrier heating and spectral hole-burning in the QD-SOA are taken into account together with the rate equations in order to realize all-optical logic operations. Results show that this scheme can realize all-optical encryption and decryption by using key-stream generators at high speed (~250 Gb/s).
In recent years reversible logic has emerged as a promising computing model for applications in dissipation less optical computing, low power CMOS, quantum computing, etc. In reversible circuits there exist a one-to-one mapping between the inputs and the outputs resulting in no loss of information. Researchers have implemented reversible logic gates in optical computing domain as it can provide high speed and low energy requirement along with easy fabrication at the chip level [1]. The all optical implementation of reversible gates are based on semiconductor optical amplifier (SOA) based Mach-Zehnder interferometer (MZI) due to its significant advantages such as high speed, low power, fast switching time and ease in fabrication. In this work we present the all optical implementation of an n bit reversible ripple carry adder for the first time in literature. The all optical reversible adder design is based on two new optical reversible gates referred as optical reversible gate I (ORG-I) and optical reversible gate II (ORG-II) and the existing all optical Feynman gate. The two new reversible gates ORG-I and ORGI-I are proposed as they can implement a reversible adder with reduced optical cost which is the measure of number of MZIs switches and the propagation delay, and with zero overhead in terms of number of ancilla inputs and the garbage outputs. The proposed all optical reversible adder design based on the ORG-I and ORG-II reversible gates are compared and shown to be better than the other existing designs of reversible adder proposed in non-optical domain in terms of number of MZIs, delay, number of ancilla inputs and the garbage outputs. The proposed all optical reversible ripple carry adder will be a key component of an all optical reversible ALU that can be applied in a wide variety of optical signal processing applications.