Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

New methods of measurements in superfluid helium

M. T. Noble

Published Jan 1, 2019• 0 citations
Publisher

Abstract

In this thesis we use quartz tuning fork resonators to probe properties of normal and superfluid 4He and 3He. Our main goal is to study both quantum turbulence and acoustic emission of tuning forks in liquid helium. By employing a multi-frequency lock-in amplifier we contrast single and multi- frequency methods of measuring tuning forks in the linear regime. In the non-linear response of tuning forks during turbulence we create multi-frequency excitations called intermodulation products which are used to find the non-linear forces that created them. We apply this technique to quantum turbulence in superfluid 4He-II and find that the retarding in-phase force on the fork increases at a critical velocity for turbulence nucleation. We also observe that the out-of-phase non-linear force increases, which we attribute to energy loss via vortex ring emission by the fork. Superfluid 3He is a fermionic condensate of Cooper pairs of 3He atoms. At ultra-low temperatures of 120 μK thermally excited unpaired quasiparticles travel ballistically through the condensate. We beam quasiparticles from a black body source towards a 5 × 5-pixel camera and observe that the excitations follow photonic-like trajectories. We apply the source-camera configuration to non-invasively detect and even image quantum vortices, that are topological defects in the superfluid. Lastly, we explore the frequency dependent damping of quartz tuning forks in liquid 3He. We find that at high frequencies the fork damping is governed by acoustic emission. Furthermore, we show that existing models developed for sound emission in 4He can be used to predict observed acoustic damping in 3He. The results also suggest that devices for 3He experiments should be placed in cavities or designed to operate at low frequencies.

DOI
10.17635/lancaster/thesis/945

Related papers

Quasiparticle beam profile measurements in superfluid helium 3 - B

S. L. Ahlstrom

This thesis details experiments in the ballistic regime of superfluid 3He-B at temperatures around 100 ➭K. In this thesis, the quasiparticle beam profile from a Black-Body radiator and a vibrating wire resonator is measured using a quasiparticle camera which consists of 25 tuning forks. The vibrating wire resonator is found to have a very thinly spread beam at velocities slightly higher than the pair-breaking critical velocity which spreads out at higher velocities. At 21 mm/s the vibrating resonator is found to have a more focused beam than the Black-Body radiator where both beam profiles are found to be focused around the centre of the quasiparticle camera. A theoretical model is created in order to model the spread and intensity of the experimental beam profile from the Black-Body radiator. In this thesis, the response of some of the probes to thermal damping is measured in the form of the geometrical constants γ and λ. The geometrical constant λ is related to the velocity dependence of the probe to thermal damping and is found for two wires of varying diameter, a tuning fork and its overtone mode in which all the values of λ were close to unity. The geometrical constant γ is related to the sensitivity of a probe to thermal damping. This is found for a Black-Body radiator and then used to derive the sensitivity for other wires in the cell in thermal equilibrium with it. Two resonant modes of a small tuning fork are used to do a Black-Body radiator calibration on the area around the tuning fork which is used to find the sensitivity of 25 tuning forks (pixels) in the quasiparticle camera.

•Nov 18, 2016•0 citations

Frequency-dependent drag from quantum turbulence produced by quartz tuning forks in superfluid He4

S. L. Ahlstrom, D. I. Bradley, Marcel Človečko +10 more

We have measured the drag force from quantum turbulence on a series of quartz tuning forks in superfluid helium. The tuning forks were custom made from a 75-$\ensuremath{\mu}$m-thick wafer. They have identical prong widths and prong spacings, but different lengths to give different resonant frequencies. We have used both the fundamental and overtone flexure modes to probe the turbulent drag over a broad range of frequencies $f=\ensuremath{\omega}/2\ensuremath{\pi}$ from 6.5 to 300 kHz. Optical measurements show that the velocity profiles of the flexure modes are well described by a cantilever beam model. The critical velocity for the onset of quantum turbulence at low temperatures is measured to be ${v}_{c}\ensuremath{\approx}\sqrt{0.7\ensuremath{\kappa}\phantom{\rule{0.16em}{0ex}}\ensuremath{\omega}}$ where $\ensuremath{\kappa}$ is the circulation quantum. The drag from quantum turbulence shows a small frequency dependence when plotted against the scaled velocity $v/{v}_{c}$.

Physical Review B•Jan 30, 2014•26 citations

Visualisation of quantum turbulence in superfluid 3He-B using a novel 2D quasiparticle detector

Andrew Woods

Quantum turbulence is a conceptually simple form of turbulence, consisting of a tangle of quantised vortex lines. It provides a model system, through which it may be possible to understand features of the complex and not yet fully understood classical turbulence. A novel detector made from arrays of custom-designed tuning forks was developed and used to investigate properties of excitation beams and quantum turbulence in superfluid 3He-B at temperatures below 200 µK. The detector was constructed from 5 arrays of 5 tuning forks mounted in a copper block to create a 25 pixel square detector of excitation flux. The detector was situated in a cell such that it could be illuminated with a beam of thermal excitations, and that turbulence could be generated in the path of the beam, which will cast a shadow on the face. Characterisation of the detector response to beams generated by the black-body radiator and source wire were performed. We observe that the beam generated by a black-body radiator appears approximately symmetric, consistent with being emitted from a point-source of excitations. In addition to this we find that the profile of the beam generated by the black-body radiator was independent of the power applied to it, an important assumption of the properties of the black-body radiator that had not been previously observed. The beam emitted from a vibrating wire was found to be much narrower and has a angular profile that changes as the velocity of the wire is increased. Probing a turbulent tangle generated by a vibrating wire with this beam showed that the turbulence appears to fill all of the volume in between the radiator and detector. The vortex line density of the tangle appeared the be greatest in the vicinity of the wire, consistent with previous measurements of the vortex tangle generated by vibrating wires. In addition, we find that there are reproducible features in the development of the shadow as a function of the wire velocity, indicating that there is some structure in the development. The shadow is independent of the power of the beam used to probe the tangle. Measurements of fluctuations in the shadow cast by the vortex tangle show that the turbulence has a spectrum reminiscent of the Kolmogorov spectrum. In addition to this the resolution of the detector is such that it is possible in principle to measure the shadow cast by a single vortex line, and we examine candidate events for such a measurement. This represents the first such measurement of the motion of vortex lines in 3He-B.

•Jan 1, 2015•0 citations

Quantum fluid dynamics and quantum turbulence probed using micro- and nano-resonators

Šimon Midlik

In this Thesis, we present an excessive study of the dynamics of quantum fluids em- ploying the detectors in the form of mechanical resonating structures with characteristic dimensions below 1 mm. We operate the devices in normal and superfluid liquid phases of both helium isotopes scanning the wide range of temperatures between 2.17 K and ≈ 150 µK. We show, that the detectors in the form of quartz tuning forks and supercon- ducting vibrating wires are suitable probes in both hydrodynamic and ballistic regimes of superfluids, described by two-fluid model. These devices can be used to initiate and observe turbulent transition in quantum fluids leading to the generation of quantum tur- bulence. The same devices can work as detectors of externally driven turbulent flows. The phenomenon of quantum turbulence, representing any turbulent flow of quantum fluids, is discussed in more detail. We further report observation of turbulent onset in mechanically and thermally driven oscillatory flows. This transition can have origin in both of the components of superfluid 4 He, leading to either classical-like instability or "quantum" instability connected with the generation of quantized vortices. Finally, we discuss the properties and potential of the MEMS and NEMS devices, advancing from much smaller dimensions,...

•Jan 1, 2023•0 citations

Experiments on quantum turbulence within superfluid 3He-B

Michael Robert Lowe

This thesis describes experiments conducted on B phase 3He in the μK temperature regime to investigate the turbulent properties of quantised vortices created by driving a vibrating wire resonator above its superfluid pair breaking critical velocity. By operating several resonators as highly sensitive vortex detectors the localised effects of vortex lines have been measured. The results have shown the vortices being of greater density in the directions of the generating wire motion and the rate of production being dependent upon the generator wire velocity. The rate at which the vortices decay spatially has been shown to approximate to a simple exponential and the decay length of this exponential has been measured. Using a thermal quasiparticle beam emitted by a black body radiator, the temperature dependence of the vorticity has been investigated for several quasiparticle beam temperatures between 177μK and 275μK and several bulk superfluid temperatures between 171μK and 236μK. The vortex line density of the turbulence has been calculated using a mathematical model developed here at Lancaster and shows some dependence on the temperature of the superfluid. The method of using a quasiparticle beam emitted from a black body radiator may be developed to allow a higher resolution of investigation of vortex creation and decay.

•Jan 1, 2003•0 citations

Dilute helium mixtures at low temperatures : properties and cooling methods

Elias Pentti

This thesis describes experimental work on dilute mixtures of ³He in 4He, mainly at millikelvin temperatures. The isotopic helium mixture has the unique property of remaining a miscible liquid down to the absolute zero temperature. In the mK regime, it consists of two very different components: perfectly superfluid 4He, and a weakly interacting degenerate Fermi liquid of ³He, predicted by theory to undergo transition to the superfluid state at an extremely low temperature. To discover that transition, new ways of cooling helium mixtures need to be developed, as it is not likely that the conventional method of nuclear demagnetization of copper can be improved to reach helium temperatures notably below the temperatures of order 0.1 mK attained so far. Adiabatic melting of 4He in the presence of liquid ³He is probably the most promising method of cooling helium mixtures to microkelvin temperatures. It produces helium mixture colder than the initial temperature as a direct consequence of the mixing of the isotopes. The starting configuration is attainable by pressurizing liquid helium mixture to its solidification pressure at a temperature below some tens of mK, as only 4He then enters the solid phase. This thesis describes an experiment in which the method of adiabatic melting was, for the first time, realized at sub-millikelvin temperatures, where the superfluidity of the pure ³He phase enables, in principle, a drastic decrease of temperature. In the experiments, cooling from initial temperatures between 0.3 and 0.9 mK was detected, temperature reduction remaining below a factor of two for recognized reasons of a technical rather than fundamental nature. A capacitive differential pressure transducer, constructed for the experiment, was used for high accuracy measurements of the temperature dependence of the melting pressure of helium mixtures with several ³He concentrations. The melting pressure is suitable for thermometry and carries information on the interactions of ³He particles in the mixture. Also, the response of a quartz tuning fork immersed in helium was studied. Its sensitivity to the properties of the surrounding fluid was utilized to determine the saturation concentration of dilute ³He across the entire accessible pressure range. The tuning fork was found to exhibit a complex pattern of anomalies attributed to resonant modes of second sound, or concentration waves, inside its cylindrical container.

•Jan 1, 2009•0 citations
In this thesis we use quartz tuning fork resonators to probe properties of normal and superfluid 4He and 3He. Our main goal is to study both quantum turbulence and acoustic emission of tuning forks in liquid helium. By employing a multi-frequency lock-in amplifier we contrast single and multi- frequency methods of measuring tuning forks in the linear regime. In the non-linear response of tuning forks during turbulence we create multi-frequency excitations called intermodulation products which are used to find the non-linear forces that created them. We apply this technique to quantum turbulence in superfluid 4He-II and find that the retarding in-phase force on the fork increases at a critical velocity for turbulence nucleation. We also observe that the out-of-phase non-linear force increases, which we attribute to energy loss via vortex ring emission by the fork. Superfluid 3He is a fermionic condensate of Cooper pairs of 3He atoms. At ultra-low temperatures of 120 μK thermally excited unpaired quasiparticles travel ballistically through the condensate. We beam quasiparticles from a black body source towards a 5 × 5-pixel camera and observe that the excitations follow photonic-like trajectories. We apply the source-camera configuration to non-invasively detect and even image quantum vortices, that are topological defects in the superfluid. Lastly, we explore the frequency dependent damping of quartz tuning forks in liquid 3He. We find that at high frequencies the fork damping is governed by acoustic emission. Furthermore, we show that existing models developed for sound emission in 4He can be used to predict observed acoustic damping in 3He. The results also suggest that devices for 3He experiments should be placed in cavities or designed to operate at low frequencies.
This thesis details experiments in the ballistic regime of superfluid 3He-B at temperatures around 100 ➭K. In this thesis, the quasiparticle beam profile from a Black-Body radiator and a vibrating wire resonator is measured using a quasiparticle camera which consists of 25 tuning forks. The vibrating wire resonator is found to have a very thinly spread beam at velocities slightly higher than the pair-breaking critical velocity which spreads out at higher velocities. At 21 mm/s the vibrating resonator is found to have a more focused beam than the Black-Body radiator where both beam profiles are found to be focused around the centre of the quasiparticle camera. A theoretical model is created in order to model the spread and intensity of the experimental beam profile from the Black-Body radiator. In this thesis, the response of some of the probes to thermal damping is measured in the form of the geometrical constants γ and λ. The geometrical constant λ is related to the velocity dependence of the probe to thermal damping and is found for two wires of varying diameter, a tuning fork and its overtone mode in which all the values of λ were close to unity. The geometrical constant γ is related to the sensitivity of a probe to thermal damping. This is found for a Black-Body radiator and then used to derive the sensitivity for other wires in the cell in thermal equilibrium with it. Two resonant modes of a small tuning fork are used to do a Black-Body radiator calibration on the area around the tuning fork which is used to find the sensitivity of 25 tuning forks (pixels) in the quasiparticle camera.
We have measured the drag force from quantum turbulence on a series of quartz tuning forks in superfluid helium. The tuning forks were custom made from a 75-$\ensuremath{\mu}$m-thick wafer. They have identical prong widths and prong spacings, but different lengths to give different resonant frequencies. We have used both the fundamental and overtone flexure modes to probe the turbulent drag over a broad range of frequencies $f=\ensuremath{\omega}/2\ensuremath{\pi}$ from 6.5 to 300 kHz. Optical measurements show that the velocity profiles of the flexure modes are well described by a cantilever beam model. The critical velocity for the onset of quantum turbulence at low temperatures is measured to be ${v}_{c}\ensuremath{\approx}\sqrt{0.7\ensuremath{\kappa}\phantom{\rule{0.16em}{0ex}}\ensuremath{\omega}}$ where $\ensuremath{\kappa}$ is the circulation quantum. The drag from quantum turbulence shows a small frequency dependence when plotted against the scaled velocity v/vcv/{v}_{c}v/vc​.
Quantum turbulence is a conceptually simple form of turbulence, consisting of a tangle of quantised vortex lines. It provides a model system, through which it may be possible to understand features of the complex and not yet fully understood classical turbulence. A novel detector made from arrays of custom-designed tuning forks was developed and used to investigate properties of excitation beams and quantum turbulence in superfluid 3He-B at temperatures below 200 µK. The detector was constructed from 5 arrays of 5 tuning forks mounted in a copper block to create a 25 pixel square detector of excitation flux. The detector was situated in a cell such that it could be illuminated with a beam of thermal excitations, and that turbulence could be generated in the path of the beam, which will cast a shadow on the face. Characterisation of the detector response to beams generated by the black-body radiator and source wire were performed. We observe that the beam generated by a black-body radiator appears approximately symmetric, consistent with being emitted from a point-source of excitations. In addition to this we find that the profile of the beam generated by the black-body radiator was independent of the power applied to it, an important assumption of the properties of the black-body radiator that had not been previously observed. The beam emitted from a vibrating wire was found to be much narrower and has a angular profile that changes as the velocity of the wire is increased. Probing a turbulent tangle generated by a vibrating wire with this beam showed that the turbulence appears to fill all of the volume in between the radiator and detector. The vortex line density of the tangle appeared the be greatest in the vicinity of the wire, consistent with previous measurements of the vortex tangle generated by vibrating wires. In addition, we find that there are reproducible features in the development of the shadow as a function of the wire velocity, indicating that there is some structure in the development. The shadow is independent of the power of the beam used to probe the tangle. Measurements of fluctuations in the shadow cast by the vortex tangle show that the turbulence has a spectrum reminiscent of the Kolmogorov spectrum. In addition to this the resolution of the detector is such that it is possible in principle to measure the shadow cast by a single vortex line, and we examine candidate events for such a measurement. This represents the first such measurement of the motion of vortex lines in 3He-B.
In this Thesis, we present an excessive study of the dynamics of quantum fluids em- ploying the detectors in the form of mechanical resonating structures with characteristic dimensions below 1 mm. We operate the devices in normal and superfluid liquid phases of both helium isotopes scanning the wide range of temperatures between 2.17 K and ≈ 150 µK. We show, that the detectors in the form of quartz tuning forks and supercon- ducting vibrating wires are suitable probes in both hydrodynamic and ballistic regimes of superfluids, described by two-fluid model. These devices can be used to initiate and observe turbulent transition in quantum fluids leading to the generation of quantum tur- bulence. The same devices can work as detectors of externally driven turbulent flows. The phenomenon of quantum turbulence, representing any turbulent flow of quantum fluids, is discussed in more detail. We further report observation of turbulent onset in mechanically and thermally driven oscillatory flows. This transition can have origin in both of the components of superfluid 4 He, leading to either classical-like instability or "quantum" instability connected with the generation of quantized vortices. Finally, we discuss the properties and potential of the MEMS and NEMS devices, advancing from much smaller dimensions,...
This thesis describes experiments conducted on B phase 3He in the μK temperature regime to investigate the turbulent properties of quantised vortices created by driving a vibrating wire resonator above its superfluid pair breaking critical velocity. By operating several resonators as highly sensitive vortex detectors the localised effects of vortex lines have been measured. The results have shown the vortices being of greater density in the directions of the generating wire motion and the rate of production being dependent upon the generator wire velocity. The rate at which the vortices decay spatially has been shown to approximate to a simple exponential and the decay length of this exponential has been measured. Using a thermal quasiparticle beam emitted by a black body radiator, the temperature dependence of the vorticity has been investigated for several quasiparticle beam temperatures between 177μK and 275μK and several bulk superfluid temperatures between 171μK and 236μK. The vortex line density of the turbulence has been calculated using a mathematical model developed here at Lancaster and shows some dependence on the temperature of the superfluid. The method of using a quasiparticle beam emitted from a black body radiator may be developed to allow a higher resolution of investigation of vortex creation and decay.
This thesis describes experimental work on dilute mixtures of ³He in 4He, mainly at millikelvin temperatures. The isotopic helium mixture has the unique property of remaining a miscible liquid down to the absolute zero temperature. In the mK regime, it consists of two very different components: perfectly superfluid 4He, and a weakly interacting degenerate Fermi liquid of ³He, predicted by theory to undergo transition to the superfluid state at an extremely low temperature. To discover that transition, new ways of cooling helium mixtures need to be developed, as it is not likely that the conventional method of nuclear demagnetization of copper can be improved to reach helium temperatures notably below the temperatures of order 0.1 mK attained so far. Adiabatic melting of 4He in the presence of liquid ³He is probably the most promising method of cooling helium mixtures to microkelvin temperatures. It produces helium mixture colder than the initial temperature as a direct consequence of the mixing of the isotopes. The starting configuration is attainable by pressurizing liquid helium mixture to its solidification pressure at a temperature below some tens of mK, as only 4He then enters the solid phase. This thesis describes an experiment in which the method of adiabatic melting was, for the first time, realized at sub-millikelvin temperatures, where the superfluidity of the pure ³He phase enables, in principle, a drastic decrease of temperature. In the experiments, cooling from initial temperatures between 0.3 and 0.9 mK was detected, temperature reduction remaining below a factor of two for recognized reasons of a technical rather than fundamental nature. A capacitive differential pressure transducer, constructed for the experiment, was used for high accuracy measurements of the temperature dependence of the melting pressure of helium mixtures with several ³He concentrations. The melting pressure is suitable for thermometry and carries information on the interactions of ³He particles in the mixture. Also, the response of a quartz tuning fork immersed in helium was studied. Its sensitivity to the properties of the surrounding fluid was utilized to determine the saturation concentration of dilute ³He across the entire accessible pressure range. The tuning fork was found to exhibit a complex pattern of anomalies attributed to resonant modes of second sound, or concentration waves, inside its cylindrical container.