This thesis covers experimental work conducted within two distinct fields of cold-atom physics. The first part describes an experiment capable of spatially-selective dispersive measurements of a cold-atomic system in part or in whole, by virtue of a digital micromirror device (DMD). Atom clouds are trapped in optical tweezers made and controlled by an acousto-optical deflector. Two types of high-precision magnetometers are realised. One is vectorial and reaches a single-shot precision of dB = (100, 200) µG for the field components parallel and transversal to the probe light, exceeding a previous realisation by two orders of magnitude. The other is a scalar magnetometer based on Larmor precession and reaches dB = 30 µG, putting it on equal footing with other state-of-the-art cold-atom magnetometers. The second part is devoted to the characterisation and the first results of a new quantum gas microscope experiment. It features a 0.69 NA microscope objective for high-resolution fluorescence imaging of individual atoms trapped in deep optical lattices. The imaging system is shown to perform near the diffraction limit. By means of DMD-generated off-resonant tight optical tweezers, projected through the high-resolution optics, we can load only a few planes of a co-propagating 1D lattice. In a single realisation of the experiment we acquire multiple fluorescence images, where the objective is translated between images, bringing different planes of the optical lattices in focus. In this way we can tomographically reconstruct the atom distribution in 3D.
This thesis covers experimental work conducted within two distinct fields of cold-atom physics. The first part describes an experiment capable of spatially-selective dispersive measurements of a cold-atomic system in part or in whole, by virtue of a digital micromirror device (DMD). Atom clouds are trapped in optical tweezers made and controlled by an acousto-optical deflector. Two types of high-precision magnetometers are realised. One is vectorial and reaches a single-shot precision of dB = (100, 200) µG for the field components parallel and transversal to the probe light, exceeding a previous realisation by two orders of magnitude. The other is a scalar magnetometer based on Larmor precession and reaches dB = 30 µG, putting it on equal footing with other state-of-the-art cold-atom magnetometers. The second part is devoted to the characterisation and the first results of a new quantum gas microscope experiment. It features a 0.69 NA microscope objective for high-resolution fluorescence imaging of individual atoms trapped in deep optical lattices. The imaging system is shown to perform near the diffraction limit. By means of DMD-generated off-resonant tight optical tweezers, projected through the high-resolution optics, we can load only a few planes of a co-propagating 1D lattice. In a single realisation of the experiment we acquire multiple fluorescence images, where the objective is translated between images, bringing different planes of the optical lattices in focus. In this way we can tomographically reconstruct the atom distribution in 3D.
Abstract We demonstrate novel implementations of high-precision optical magnetometers which allow for spatially-selective and spatially-resolved in situ measurements using cold atomic clouds. These are realised by using shaped dispersive probe beams combined with spatially-resolved balanced homodyne detection. Two magnetometer sequences are discussed: a vectorial magnetometer, which yields sensitivities two orders of magnitude better compared to a previous realisation and a Larmor magnetometer capable of measuring absolute magnetic fields. We characterise the dependence of single-shot precision on the size of the analysed region for the vectorial magnetometer and provide a lower bound for the measurement precision of magnetic field gradients for the Larmor magnetometer. Finally, we give an outlook on how dynamic trapping potentials combined with selective probing can be used to realise enhanced quantum simulations in quantum gas microscopes.
The development of an experimental apparatus to produce Bose-Einstein condensates (BECs) of ⁸⁷Rb atoms and their application to magnetometry are discussed. Optical detection of atomic Larmor precession is a widely explored method for high-sensitivity measurements of magnetic fields. In this context, short laser/atom interaction time, atomic thermal diffusion and decoherence effects are among the main limitations. In this thesis, we overcome such problems by using spin-polarised ⁸⁷Rb ultra-cold atoms as the sensing element. After the atoms are polarised, a resonant pulse of radio-frequency excites Larmor precession, which is sensitive to external magnetic fields. By measuring the perturbations of the radio-frequency induced spin precession, information on the magnetic fields of interest. This is achieved by monitoring the polarisation plane’s rotation of a linearly polarised resonant laser probe. In the first part of this thesis, the building and optimisation of a laser-cooling set up to obtain a BEC in a hybrid trap is reported. In order to achieve the Phase Space Density (PSD) required for BEC, several different stages of trapping and cooling are necessary. Each phase has been implemented and optimised. The first step consists in the magneto-optical trap (MOT). Here a velocity dependent damping force and a spatially dependent confining force give the largest changes in PSD. Then atoms are loaded into a hybrid trap obtained by overlapping a quadrupole magnetic potential and a far detuned optical crossed dipole trap. The final stage for the condensation consists of forced evaporative cooling, both via magnetic and optical evaporation. In the second part of the thesis, a general overview of the principles of optical atomic magnetometry is provided and the advantages of using ultra-cold atoms with respect to conventional thermal vapours are discussed. The implementation, operation and a preliminary characterisation of the ultra-cold atom magnetometer are described along with the preliminary results collected. Finally, a plan for future improvements of its sensitivity is presented.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
This thesis reports the construction of a novel apparatus for experiments with ultracold atoms in optical lattices: the Fermi gas microscope.Improving upon similar designs for bosonic atoms, our Fermi gas microscope has the novel feature of being able to achieve single-site resolved imaging of fermionic atoms in an optical lattice; specifically, we use fermionic potassium-40, sympathetically cooled by bosonic sodium-23.In this thesis, several milestones on the way to achieving single-site resolution are described and documented.First, we have tested and mounted in place the imaging optics necessary for achieving single-site resolution.We set up separate 3D magnetooptical traps for capturing and cooling both 2 3 Na and 40 K.These species are then trapped simultaneously in a plugged quadrupole magnetic trap and evaporated to degeneracy; we obtain a sodium Bose-Einstein condensate with about a million atoms and a degenerate potassium cloud cooled to colder than 1 puK.Using magnetic transport over a distance of 1 cm, we move the cold cloud of atoms into place under the high-resolution imaging system and capture it in a hybrid magnetic and optical-dipole trap.Further evaporation in this hybrid trap performed by lowering the optical trap depth, and the cooled atoms are immersed in an optical lattice, the setup and calibration of which is also described here.Finally, we cool the atoms with optical molasses beams while in the lattice, with the imaging optics collecting the fluoresence light for high-resolution imaging.With molasses cooling set up, single-site fluoresence imaging of bosons and fermions in the same experimental apparatus is within reach.
This thesis describes the methods used to achieve single-atom and single-site resolved fluorescence imaging of a quantum gas of fermionic atoms held in an optical lattice. This kind of quantum gas microscopy has been previously applied to bosonic atoms in two experiments, and has allowed for extensive studies of many-body quantum systems. Here we detail methods to extend the techniques of quantum gas microscopy to fermionic species of atoms, opening the door to quantum simulation of electronic models of condensed matter physics. We prepare quantum degenerate gases of fermionic 40K through sympathetic cooling with a gas of \Rb. The gas prepared is trapped less than 1 mm away from a thin vacuum window, an experimental geometry which permits interrogation with a large Numerical Aperture microscope objective. The cloud is loaded into a 527 nm-period cubic optical lattice, ideal for quantum simulation of many-body models of fermionic particles such as the Hubbard model. The optical lattice is designed to allow for potential depths up to V/kB = 250 microKelvin, sufficient to strongly confine 40K atoms into individual lattice sites. EIT cooling --- a technique previously demonstrated in ion-trapping experiments --- is used to cool the fermionic atoms deeply towards the ground motional state of the lattice wells. We collect the photons scattered during continuous application of EIT cooling, while atoms are kept pinned in the lattice for many seconds. We strongly suppress all other sources of light with the use of a modulated cooling scheme and a spinning chopper wheel. Collecting the scattered light produced during 2 s of EIT cooling allows us to resolve single atoms in a fluorescence image. We demonstrate that the high resolution of our imaging apparatus also permits atom positions to be precisely identified on the length scale of the optical lattice. Thus we demonstrate the realisation of a quantum gas microscope for fermionic atoms, allowing for precise investigation of the ground states and dynamics of correlated quantum states of fermionic particles.
Ultra-cold atoms have small kinetic energy and are therefore very sensitive to external fields that act on the atoms. By having fine control over the positioning of the ultra-cold atom cloud we can use the atom cloud as a sensor for magnetic fields. By imaging these atom clouds we can infer a spatial map of the magnetic field. This spatial map will have a resolution proportional to the distance between the source of the magnetic field and the atom cloud which can be on the order of 0:1 µm. In the first half of the thesis, we investigate the two colour magneto-optical trap. This is a simple technique that can lead to a multiplicative increase in the number of atoms in a magneto-optical trap with a simple change to the optical setup. Using the two colour magneto-optical trap we have observed an increase of 5 times in the number of trapped atoms. An increase in the number of atoms in a magneto-optical helps with later cooling processes that are not lossless such as evaporative cooling which in turn helps the realisation of the ultra-cold atom microscope. In the second half of the thesis, we demonstrate how a 2d current density can be recovered from a 2d magnetic field map generated by the ultra-cold atom microscope. We then go on to show the sensitivity and responsivity of a cold atom cloud and a Bose-Einstein condensate. We then use the results of the previous section to simulate the measurement of currents in a silver nanowire network. Properties of the silver nanowire network can be simulated and aid in showing the abilities and limitations of the ultra-cold atom microscope. We found that the ultra-cold atom microscope can directly measure currents in low-density silver nanowire networks. In a high-density silver nanowire network, the average distance between the wires becomes too small to resolve. Hot-spots, areas of high current density can still be identified using the ultra-cold atom microscope. The ultracold atom microscope could then be used as a tool to aid the research look to use silver nanowires in many industrial applications such as touch screens.