Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cybersecurity Education Science Technique

MATHEMATICAL MODEL FOR TRANSITIONAL PROCESSES IN JOSEPHSON MEMORY ELEMENTS

М. В. Тиханський, Andrii Partyka

Published Jan 1, 2020• 0 citations
Publisher

Abstract

The goal of this work is to find ways of enhancing the speed of computer memory cells by using structures that employ operating principles other than those of traditional semiconductors’ schemes. One of the applications of the unique properties of Josephson structures is their usage in novel superfast computer memory cells. Thanks to their high working characteristic frequencies close to 1 THz, the Josephson structures are most promising candidates to be used in petaflop computers. Moreover, both Josephson cryotrons and Josephson SQUIDs can be used in qubits, which are basic units in quantum computers, and also for describing a macroscopic quantum behavior, for example, during read-out processes in quantum computations. In the present work, we have created a mathematical model of transition processes in Josephson cryotrons during direct, “1” → ”0”, as well as inverse, “0” → “1”, logical transitions. We have considered controlling the logical state of Josephson memory cells based on Josephson tunneling junctions of the S-I-S type via external current pulses. By means of mathematical modelling, we have studied transition processes in cryotrons during the change of their logical state and calculated their transition characteristics for working temperatures T1 = 11.6 K and T2 = 81.2 K, which ale close to the boiling temperatures of helium and nitrogen, respectively. It has been shown that such memory cells can effectively operate at the working temperature T2 = 81.2 K. We have determined commutation times for both the direct “0” → “1” and inverse “0” → “1” transitions. We have also identified peculiar behaviors of the Josephson cryotrons based memory cells and studied the stability of their operation.

DOI
10.28925/2663-4023.2020.8.7384

Related papers

INCREASING THE SWITCHING RATE OF THE AND AND OR LOGICAL OPERATIONS BASED ON JOSEPHSON JUNCTIONS

М. В. Тиханський, Andrii Partyka, Р. Р. Крисько

Using of traditional logic elements in digital electronics has ensured the development of a wide range of electronic devices for many years. In parallel, research and development of logical elements are carried out on the basis of other non-traditional physical phenomena or effects, in particular logic elements based on the phenomenon of superconductivity, the prospect of which is the use of very small energy consumption and ultrahigh performance. For superconducting logic elements, using various Josephson cryoelectronic structures, known as Josephson cryotrons, based on the stationary and non-stationary effects of Josephson. On the basis of the Josephson cryotrons, one can create Josephson elements of computer memory, and Josephson elements of digital logic. The main requirements for the Josephson cryotrons are a stable operating mode and high speed or short switching time. Information about the mode of operation and the speed give us the transition characteristics of the cryotrons - the time dependence of the voltage on the cryotron while changing its logical state, which can be obtained either experimentally, or theoretically. This work aims at a search for new ways of increasing the switching rate of digital logical operators by employing physical structures other than the traditional semiconductor-based schemes. We propose the principles of designing digital logical operators based on Josephson cryotrons, whose operation utilizes the stationary and dynamical Josephson effects, and describe the operational principles of the logical elements “AND” and “OR” bases on tunneling Josephson junctions “superconductor-insulator-superconductor”. Our proposed mathematical models for the commutation processes in such logical elements allowed us to calculate their transition characteristics during the switching and to determine the main parameters in such models. It was shown that the logical elements “AND” and “OR” can be implemented on individual cryotrons and that their logical state can be controlled by input signals in a form of current pulses. Such logical elements meet all the requirements for digital logical elements and have switching time of about 2-3 ps, which indicates their significantly increased switching rate.

Cybersecurity Education Science Technique•Jan 1, 2019•1 citation

A MATHEMATICAL MODEL OF TRANSITIONAL PROCESSES IN CRYOTRONS BASED SQUIDS

М. В. Тиханський, Andrii Partyka

Using an equivalent circuit and the operational principle of a two-terminal Superconducting Quantum Interference Device (SQUID) as a computer memory cell, a mathematical model of transitional processes in such quantum cryotrons has been created. The magnetic flux regulated logicstate transitional characteristics of quantum cryotrons are calculated for logic transitions “0”→“1” and “1”→“0”. We show that stable functioning of these cryotrons is possible only for logic transitions “0”→“1”. The influence of the amplitude of the regulating magnetic flux impulses and the average duration of an impulse on the transitional characteristics of cryotrons is investigated.

Sensor Electronics and Microsystem Technologies•Nov 13, 2007•3 citations

THE COMBINED METHOD OF LOGICAL STATE CONTROLLING OF CRIOTRONS BASED ON SQUIDS

М. В. Тиханський, Andrii Partyka

In the present work, we have improved the mathematical model of transition processes in Josephson memory cells (cryotrons), which can be created on the base of semiconductor quantum interferometers (SQUIDs). We employed two-contact SQUIDs to construct the cryotrons and investigated the possibilities to control the cryotrons’ logical state by means of mathematical modeling. A combined method of logical state controlling of such cryotrons has been proposed since the simpler controlling method, where only impulses of magnetic flux are used, fails to provide stable operation of cryotrons during the inverse logical transitions “1” → “0”. We show that the direct logical transitions “0” → “1” are effectively realized via controlling magnetic flux impulses whereas the transitions “1” → “0” are realized via controlling current impulses. Transition characteristics of the cryotrons during direct and inverse logical transitions are calculated.

Sensor Electronics and Microsystem Technologies•Feb 10, 2009•0 citations

Modeling the switching processes in the Josephson AND and OR logic gates

М. В. Тиханський, Р. Р. Крисько

We propose a design principle of digital logic gates based on Josephson cryotrons. The operation mode of digital logic gates AND and OR based on tunnel junctions “superconductor–insulator–superconductor” was described. Mathematical models of the switching processes in the logic elements were developed, the transient characteristics during the logic state change were calculated, and the basic parameters of these models were determined. It was shown that digital logic gates “AND” and “OR” can be realized based on individual Josephson cryotrons and their logic state can be controlled by using current pulses as control inputs. Such logic gates satisfy all the requirements for digital logic elements and have switching time of about 2–3 ps.

Low Temperature Physics•Feb 1, 2013•0 citations

Control of Cryogenic Memory State Transitions in a Josephson Junction Array

Roland Harvey, Zhihua Qu

Energy efficient cryogenic memory and Josephson junction arrays have the potential of revolutionizing high-performance computing systems based on single flux quantum logic. In this paper, a pulse control is designed to switch among stable equilibrium states of a Josephson junction array. Josephson junction arrays have the ability to store state information at low temperatures and energies, which naturally is useful for cryogenic memory applications. Although typical memory applications involve binary states, as a memory cell, the Josephson junction array has the ability to occupy nonbinary states given the nonlinear nature of the dynamics, which can lead to a reduced number of cells required in practical applications among other advantages. Transitions between states can be achieved through experimental testing for specific transitions, however, there are no known closed-form solutions to arbitrarily transition from one stable state to another. The system dynamics are similar to an array of coupled nonlinear oscillators, for which there is no known analytical solution. By providing an energy-based analysis for the junction array, a lower bound is determined and system trajectories are closely approximated such that the array is capable of transitioning between any desired stable equilibrium states under a Gaussian pulse input.

Proceedings of the ... American Control Conference/Proceedings of the American Control Conference•Jun 1, 2018•6 citations

Computer Elements

Antonio Barone, Gianfranco Paternò

This chapter contains sections titled: Cryotrons Matisoo's experiments Tunneling cryotron Flip-flop circuit Operation times Different switching modes Interference switching devices Memory Cells Flip-flop memory configuration Single flux quantum storage devices Examples of Josephson logic and memory circuits Systems performance and requirements Conclusions and perspectives

Wiley eBooks•Jul 14, 1982•0 citations
The goal of this work is to find ways of enhancing the speed of computer memory cells by using structures that employ operating principles other than those of traditional semiconductors’ schemes. One of the applications of the unique properties of Josephson structures is their usage in novel superfast computer memory cells. Thanks to their high working characteristic frequencies close to 1 THz, the Josephson structures are most promising candidates to be used in petaflop computers. Moreover, both Josephson cryotrons and Josephson SQUIDs can be used in qubits, which are basic units in quantum computers, and also for describing a macroscopic quantum behavior, for example, during read-out processes in quantum computations. In the present work, we have created a mathematical model of transition processes in Josephson cryotrons during direct, “1” → ”0”, as well as inverse, “0” → “1”, logical transitions. We have considered controlling the logical state of Josephson memory cells based on Josephson tunneling junctions of the S-I-S type via external current pulses. By means of mathematical modelling, we have studied transition processes in cryotrons during the change of their logical state and calculated their transition characteristics for working temperatures T1 = 11.6 K and T2 = 81.2 K, which ale close to the boiling temperatures of helium and nitrogen, respectively. It has been shown that such memory cells can effectively operate at the working temperature T2 = 81.2 K. We have determined commutation times for both the direct “0” → “1” and inverse “0” → “1” transitions. We have also identified peculiar behaviors of the Josephson cryotrons based memory cells and studied the stability of their operation.
Using of traditional logic elements in digital electronics has ensured the development of a wide range of electronic devices for many years. In parallel, research and development of logical elements are carried out on the basis of other non-traditional physical phenomena or effects, in particular logic elements based on the phenomenon of superconductivity, the prospect of which is the use of very small energy consumption and ultrahigh performance. For superconducting logic elements, using various Josephson cryoelectronic structures, known as Josephson cryotrons, based on the stationary and non-stationary effects of Josephson. On the basis of the Josephson cryotrons, one can create Josephson elements of computer memory, and Josephson elements of digital logic. The main requirements for the Josephson cryotrons are a stable operating mode and high speed or short switching time. Information about the mode of operation and the speed give us the transition characteristics of the cryotrons - the time dependence of the voltage on the cryotron while changing its logical state, which can be obtained either experimentally, or theoretically. This work aims at a search for new ways of increasing the switching rate of digital logical operators by employing physical structures other than the traditional semiconductor-based schemes. We propose the principles of designing digital logical operators based on Josephson cryotrons, whose operation utilizes the stationary and dynamical Josephson effects, and describe the operational principles of the logical elements “AND” and “OR” bases on tunneling Josephson junctions “superconductor-insulator-superconductor”. Our proposed mathematical models for the commutation processes in such logical elements allowed us to calculate their transition characteristics during the switching and to determine the main parameters in such models. It was shown that the logical elements “AND” and “OR” can be implemented on individual cryotrons and that their logical state can be controlled by input signals in a form of current pulses. Such logical elements meet all the requirements for digital logical elements and have switching time of about 2-3 ps, which indicates their significantly increased switching rate.
Using an equivalent circuit and the operational principle of a two-terminal Superconducting Quantum Interference Device (SQUID) as a computer memory cell, a mathematical model of transitional processes in such quantum cryotrons has been created. The magnetic flux regulated logicstate transitional characteristics of quantum cryotrons are calculated for logic transitions “0”→“1” and “1”→“0”. We show that stable functioning of these cryotrons is possible only for logic transitions “0”→“1”. The influence of the amplitude of the regulating magnetic flux impulses and the average duration of an impulse on the transitional characteristics of cryotrons is investigated.
In the present work, we have improved the mathematical model of transition processes in Josephson memory cells (cryotrons), which can be created on the base of semiconductor quantum interferometers (SQUIDs). We employed two-contact SQUIDs to construct the cryotrons and investigated the possibilities to control the cryotrons’ logical state by means of mathematical modeling. A combined method of logical state controlling of such cryotrons has been proposed since the simpler controlling method, where only impulses of magnetic flux are used, fails to provide stable operation of cryotrons during the inverse logical transitions “1” → “0”. We show that the direct logical transitions “0” → “1” are effectively realized via controlling magnetic flux impulses whereas the transitions “1” → “0” are realized via controlling current impulses. Transition characteristics of the cryotrons during direct and inverse logical transitions are calculated.
We propose a design principle of digital logic gates based on Josephson cryotrons. The operation mode of digital logic gates AND and OR based on tunnel junctions “superconductor–insulator–superconductor” was described. Mathematical models of the switching processes in the logic elements were developed, the transient characteristics during the logic state change were calculated, and the basic parameters of these models were determined. It was shown that digital logic gates “AND” and “OR” can be realized based on individual Josephson cryotrons and their logic state can be controlled by using current pulses as control inputs. Such logic gates satisfy all the requirements for digital logic elements and have switching time of about 2–3 ps.
Energy efficient cryogenic memory and Josephson junction arrays have the potential of revolutionizing high-performance computing systems based on single flux quantum logic. In this paper, a pulse control is designed to switch among stable equilibrium states of a Josephson junction array. Josephson junction arrays have the ability to store state information at low temperatures and energies, which naturally is useful for cryogenic memory applications. Although typical memory applications involve binary states, as a memory cell, the Josephson junction array has the ability to occupy nonbinary states given the nonlinear nature of the dynamics, which can lead to a reduced number of cells required in practical applications among other advantages. Transitions between states can be achieved through experimental testing for specific transitions, however, there are no known closed-form solutions to arbitrarily transition from one stable state to another. The system dynamics are similar to an array of coupled nonlinear oscillators, for which there is no known analytical solution. By providing an energy-based analysis for the junction array, a lower bound is determined and system trajectories are closely approximated such that the array is capable of transitioning between any desired stable equilibrium states under a Gaussian pulse input.