Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Opto-Electronics Review

Phase coding of information in the optical fibre sensor

M. Życzkowski, M. Karol, Norbert Pałka

Published Feb 27, 2020• 0 citations
Publisher

Abstract

Determining the dependence of phase difference modulations between light pulses in a modified Mach-Zehnder interferometer was used to develop an optical system coding the information and working as an eavesdropping sensor for an optical fibre information exchange system. The basic challenge in the system development is to maintain stable operation in changing environmental conditions, as well as to ensure optimal parameters of the phase modulator. The system was tested for various many-kilometer long transmission lines of single-mode fibres. The research was focused on achieving the normative Bit Error Rate for the system in the 100 Mbit/s range (STM-1). Such a system can be used in commercial applications for the code key secure transmission in the physical layer of the link.

DOI
10.24425/opelre.2020.132496

Related papers

Safety of data exchange in pulse interferometer

Mateusz Karol, M. Życzkowski, M. Szustakowski

Current solutions used for protection of information transmitted in fibre optic networks are based on direct detection of fibre optic cable eavesdropping and encryption of transmitted information. Protection of fibre optic cables from physical intrusion in to the transmission channel is realized on dark optical fibres, not used in the transmission of information. Security of encrypted information is based on the assumption of limited computing power used for cryptanalysis, what with the introduction of operating quantum computers will cease to apply. So ideal solution for information protection is physical it coding that makes eavesdropping near to impossible, in the same time allows of constant monitoring of fibre physical integrity. The article describes the construction and principle of operation used in fibre optic pulse interferometer, that allows to detect mechanical disorders of fibre optic transmission line with simultaneous transmission of information. Operation of the system relies on encoding information in phase of optical radiation pulses and for monitoring the status of the transmission line by analysis polarization of radiation in interferometer. System configuration provides stabilized work of pulse interferometer over several kilometres, under varying environmental conditions. Unique capabilities of detection system enable the use of two independent criteria for alarm signal excitation. The aim of the study was to determine the security degree provided by system to protection of transmitted information in proposed arrangement.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2017•1 citation

Quantum key distribution over 1 0 1 km of telecom fibre

C. Gobby, Zhiliang L. Yuan, Andrew J. Shields

Our system is based upon a Mach-Zender interferometer using phase modulation. Photons are generated by a 1.55 pm DFB pulsed laser diode operating with a repetition rate of 2 MHz. The pulses are strongly attenuated so that on average 0. I photons/clock cycle leaves the senders apparatus. Phase modulators. controlled by custom electronics, in the two interfering arms were used to encode the bit information. The signal is multiplexed with pulses from a 1.3 pm clock laser which serves as a timing reference. Cooled InGaAs avalanche photodiodes operating in Geiger mode are used to detect the single photons. It is imperative for operation over long fibres that the dark count rate in the single photon detector is as low as possible. Our detectors typically have a dark count probability of 3.2~10.~ er gate, along with a detection efficiency of 12% at 1.55 pm. This yields a Noise Equivalent Power of I .OXIO-'~ WHz- , whcch IS one of the lowest reported to date. R ' . The interferometer displayed a single photon interference fringe visibility between 99.1% and 99.7% for fibre lengths up to 65km. For longer fibre lengths the visibility falls, but remains around 96% at IOlkm, see Figure 1. The QBER, shown in Figure 2, remains virtually constant at around 3.6% for fibre length up to 50km, suggesting that the dominant contribution derives from inaccuracy in the phase modulation. Beyond 50km the QBER increases with fibre length, due to dark count noise. At 101 km, the QBER averaged over a 2-minute key transfer is typically 7. I %. This error rate is below the 1 I .5% limit, thus allowing us to perform error correction and privacy amplification to form a secure key. The sifted bit rate (shown in Figure 2) decreases with increasing fibre length at a rate of -0.20 dB/km, close to the specified value. At IOOkm the average bit rate was typically 15 Hz, sufficient to allow a cryptographic key to be transferred in several tens of seconds. 100

•Jan 1, 2003•0 citations

Double security level in a telecommunication system based on phase coding and false data transmission

Bruno Wacogne, Mark D. Jackson, N E Fisher +2 more

A new communication system exhibiting a double security level is demonstrated. Information coding is based on relative phase changes between consecutive time intervals of the light emitted from a highly coherent CW source. An imbalanced Mach-Zehnder interferometer whose time delay matches the intervals duration is used to decode the data. The first security level is related to the constant optical power in the transmission link. To further enhance the security, a low coherent source is used to send false data down the transmission link. Common mode rejection is used to separate the real signal from the false signal. This system provides a high signal-to-noise ratio as well as a low crosstalk in a wavelength division multiplexing network.

Journal of Lightwave Technology•May 1, 1996•4 citations

Security enhancement for a DPSK telecommunication system using false data transmission

Bruno Wacogne, Mark D. Jackson, Norman E. Fisher +2 more

In this conference, we demonstrate a new communication system exhibiting a double security level. Information coding is based on differential phase shift keying of the light emitted from a highly coherent CW source. An imbalanced Mach-Zehnder interferometer whose time delay matches the bit duration is used to decode the data. Since the optical power is constant in the transmission link, security levels comparable with those obtained in coherence modulation may be achieved. To further enhance the security, a low coherent source is used to send false data down the transmission link. The discrimination between real and false signal is based on common mode rejection. A study of the signal to noise ratio achieved with this system is also discussed in this manuscript.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 1, 1996•0 citations

A multi-protocol quantum key distribution transmitter

George L. Roberts

Quantum key distribution (QKD) is a technology that allows two users to communicate with theoretically perfect security using standard optical fibres. This is possible by transmitting the key on single photons, meaning a measurement by an eavesdropper disturbs the system in a way observable to the legitimate parties. The technology has advanced since the first protocol proposed in 1984, to the stage where there are now many protocols that can be experimentally implemented. These protocols have allowed secure keys to be generated over distances greater than 400 km and with secure key rates over 10 Mbit/s. In a metropolitan QKD network, it would be desirable for as many users to be connected as possible. Unfortunately, each protocol comes with different requirements on the transmitter and receiver. Even within a single protocol, different clock rates can require individualised transmitter and receiver hardware. This prohibits users from communicating with all receivers, unless they have complex transmitters with hardware for many protocols. This thesis develops a transmitter for practical QKD that is able to adapt to a number of different protocols with no changes to the hardware. The transmitter works using optical injection locking, where a pulse preparation laser adopts the phase of a phase preparation laser. Controlling the phase and intensity of the pulses in this way removes the side channel ordinarily present with direct modulation, in that the phase, intensity and frequency simultaneously change in response to an applied current. The cavity-enhanced electro-optic effect allows for the first demonstration of sub-volt half-wave phase modulation at high clock rates. The transmitter successfully demonstrates phase encoding, intensity encoding and on-demand phase randomisation. This allows for the experimental realisation and direct comparison of different QKD protocols, including one that has never before been implemented due to experimental complexity. A stable intensity modulator is also developed, based on a Sagnac interferometer. This removes a side channel in QKD systems and integrates well with the directly-modulated quantum transmitter. This development also means that the transmitter can implement all current two-party QKD protocols based on weak coherent pulses. The transmitter has the potential to become the standard transmitter for future quantum communication networks due to its stability, versatility and power efficiency. The design could also be demonstrated on a photonic chip, making it compact enough to fit in small transmitter units.

•Jul 31, 2018•0 citations

Experimental implementation of time-coding quantum key distribution

William Boucher, Thierry Debuisschert

We have implemented an experimental setup in order to demonstrate the feasibility of time-coding protocols for quantum key distribution. Alice produces coherent 20-ns faint pulses of light at 853 nm. They are sent to Bob with delay 0 ns (encoding bit 0) or 10 ns (encoding bit 1). Bob directs at random the received pulses to two different arms. In the first one, a 300 ps resolution Si photon counter allows Bob to precisely measure the detection times of each photon in order to establish the key. Comparing them with the emission times of the pulses sent by Alice allows one to evaluate the quantum bit error rate (QBER). The minimum obtained QBER is 1.62%. The possible loss of coherence in the setup can be exploited by Eve to eavesdrop the line. Therefore, the second arm of Bob setup is a Mach-Zehnder interferometer with a 10 ns propagation delay between the two paths. Contrast measurement of the output beams allows one to measure the autocorrelation function of the received pulses that characterizes their average coherence. In the case of an ideal setup, the value expected with the pulses sent by Alice is 0.576. The experimental value of the pulses autocorrelation function is found to be 0.541. Knowing the resulting loss of coherence and the measured QBER, one can evaluate the mutual information between Alice and Eve and the mutual information between Alice and Bob, in the case of intercept-resend attacks and in the case of attacks with intrication. With our values, Bob has an advantage on Eve of 0.43 bit per pulse. The maximum possible QBER corresponding to equal informations for Bob and Eve is 5.8%. With the usual attenuation of fibres at 850 nm, it shows that secure key distribution is possible up to a distance of 2.75 km, which is sufficient for local links.

arXiv:quant-ph/0601068•Physical Review A•Dec 19, 2005•23 citations
Determining the dependence of phase difference modulations between light pulses in a modified Mach-Zehnder interferometer was used to develop an optical system coding the information and working as an eavesdropping sensor for an optical fibre information exchange system. The basic challenge in the system development is to maintain stable operation in changing environmental conditions, as well as to ensure optimal parameters of the phase modulator. The system was tested for various many-kilometer long transmission lines of single-mode fibres. The research was focused on achieving the normative Bit Error Rate for the system in the 100 Mbit/s range (STM-1). Such a system can be used in commercial applications for the code key secure transmission in the physical layer of the link.
Current solutions used for protection of information transmitted in fibre optic networks are based on direct detection of fibre optic cable eavesdropping and encryption of transmitted information. Protection of fibre optic cables from physical intrusion in to the transmission channel is realized on dark optical fibres, not used in the transmission of information. Security of encrypted information is based on the assumption of limited computing power used for cryptanalysis, what with the introduction of operating quantum computers will cease to apply. So ideal solution for information protection is physical it coding that makes eavesdropping near to impossible, in the same time allows of constant monitoring of fibre physical integrity. The article describes the construction and principle of operation used in fibre optic pulse interferometer, that allows to detect mechanical disorders of fibre optic transmission line with simultaneous transmission of information. Operation of the system relies on encoding information in phase of optical radiation pulses and for monitoring the status of the transmission line by analysis polarization of radiation in interferometer. System configuration provides stabilized work of pulse interferometer over several kilometres, under varying environmental conditions. Unique capabilities of detection system enable the use of two independent criteria for alarm signal excitation. The aim of the study was to determine the security degree provided by system to protection of transmitted information in proposed arrangement.
Our system is based upon a Mach-Zender interferometer using phase modulation. Photons are generated by a 1.55 pm DFB pulsed laser diode operating with a repetition rate of 2 MHz. The pulses are strongly attenuated so that on average 0. I photons/clock cycle leaves the senders apparatus. Phase modulators. controlled by custom electronics, in the two interfering arms were used to encode the bit information. The signal is multiplexed with pulses from a 1.3 pm clock laser which serves as a timing reference. Cooled InGaAs avalanche photodiodes operating in Geiger mode are used to detect the single photons. It is imperative for operation over long fibres that the dark count rate in the single photon detector is as low as possible. Our detectors typically have a dark count probability of 3.2~10.~ er gate, along with a detection efficiency of 12% at 1.55 pm. This yields a Noise Equivalent Power of I .OXIO-'~ WHz- , whcch IS one of the lowest reported to date. R ' . The interferometer displayed a single photon interference fringe visibility between 99.1% and 99.7% for fibre lengths up to 65km. For longer fibre lengths the visibility falls, but remains around 96% at IOlkm, see Figure 1. The QBER, shown in Figure 2, remains virtually constant at around 3.6% for fibre length up to 50km, suggesting that the dominant contribution derives from inaccuracy in the phase modulation. Beyond 50km the QBER increases with fibre length, due to dark count noise. At 101 km, the QBER averaged over a 2-minute key transfer is typically 7. I %. This error rate is below the 1 I .5% limit, thus allowing us to perform error correction and privacy amplification to form a secure key. The sifted bit rate (shown in Figure 2) decreases with increasing fibre length at a rate of -0.20 dB/km, close to the specified value. At IOOkm the average bit rate was typically 15 Hz, sufficient to allow a cryptographic key to be transferred in several tens of seconds. 100
A new communication system exhibiting a double security level is demonstrated. Information coding is based on relative phase changes between consecutive time intervals of the light emitted from a highly coherent CW source. An imbalanced Mach-Zehnder interferometer whose time delay matches the intervals duration is used to decode the data. The first security level is related to the constant optical power in the transmission link. To further enhance the security, a low coherent source is used to send false data down the transmission link. Common mode rejection is used to separate the real signal from the false signal. This system provides a high signal-to-noise ratio as well as a low crosstalk in a wavelength division multiplexing network.
In this conference, we demonstrate a new communication system exhibiting a double security level. Information coding is based on differential phase shift keying of the light emitted from a highly coherent CW source. An imbalanced Mach-Zehnder interferometer whose time delay matches the bit duration is used to decode the data. Since the optical power is constant in the transmission link, security levels comparable with those obtained in coherence modulation may be achieved. To further enhance the security, a low coherent source is used to send false data down the transmission link. The discrimination between real and false signal is based on common mode rejection. A study of the signal to noise ratio achieved with this system is also discussed in this manuscript.
Quantum key distribution (QKD) is a technology that allows two users to communicate with theoretically perfect security using standard optical fibres. This is possible by transmitting the key on single photons, meaning a measurement by an eavesdropper disturbs the system in a way observable to the legitimate parties. The technology has advanced since the first protocol proposed in 1984, to the stage where there are now many protocols that can be experimentally implemented. These protocols have allowed secure keys to be generated over distances greater than 400 km and with secure key rates over 10 Mbit/s. In a metropolitan QKD network, it would be desirable for as many users to be connected as possible. Unfortunately, each protocol comes with different requirements on the transmitter and receiver. Even within a single protocol, different clock rates can require individualised transmitter and receiver hardware. This prohibits users from communicating with all receivers, unless they have complex transmitters with hardware for many protocols. This thesis develops a transmitter for practical QKD that is able to adapt to a number of different protocols with no changes to the hardware. The transmitter works using optical injection locking, where a pulse preparation laser adopts the phase of a phase preparation laser. Controlling the phase and intensity of the pulses in this way removes the side channel ordinarily present with direct modulation, in that the phase, intensity and frequency simultaneously change in response to an applied current. The cavity-enhanced electro-optic effect allows for the first demonstration of sub-volt half-wave phase modulation at high clock rates. The transmitter successfully demonstrates phase encoding, intensity encoding and on-demand phase randomisation. This allows for the experimental realisation and direct comparison of different QKD protocols, including one that has never before been implemented due to experimental complexity. A stable intensity modulator is also developed, based on a Sagnac interferometer. This removes a side channel in QKD systems and integrates well with the directly-modulated quantum transmitter. This development also means that the transmitter can implement all current two-party QKD protocols based on weak coherent pulses. The transmitter has the potential to become the standard transmitter for future quantum communication networks due to its stability, versatility and power efficiency. The design could also be demonstrated on a photonic chip, making it compact enough to fit in small transmitter units.
We have implemented an experimental setup in order to demonstrate the feasibility of time-coding protocols for quantum key distribution. Alice produces coherent 20-ns faint pulses of light at 853 nm. They are sent to Bob with delay 0 ns (encoding bit 0) or 10 ns (encoding bit 1). Bob directs at random the received pulses to two different arms. In the first one, a 300 ps resolution Si photon counter allows Bob to precisely measure the detection times of each photon in order to establish the key. Comparing them with the emission times of the pulses sent by Alice allows one to evaluate the quantum bit error rate (QBER). The minimum obtained QBER is 1.62%. The possible loss of coherence in the setup can be exploited by Eve to eavesdrop the line. Therefore, the second arm of Bob setup is a Mach-Zehnder interferometer with a 10 ns propagation delay between the two paths. Contrast measurement of the output beams allows one to measure the autocorrelation function of the received pulses that characterizes their average coherence. In the case of an ideal setup, the value expected with the pulses sent by Alice is 0.576. The experimental value of the pulses autocorrelation function is found to be 0.541. Knowing the resulting loss of coherence and the measured QBER, one can evaluate the mutual information between Alice and Eve and the mutual information between Alice and Bob, in the case of intercept-resend attacks and in the case of attacks with intrication. With our values, Bob has an advantage on Eve of 0.43 bit per pulse. The maximum possible QBER corresponding to equal informations for Bob and Eve is 5.8%. With the usual attenuation of fibres at 850 nm, it shows that secure key distribution is possible up to a distance of 2.75 km, which is sufficient for local links.