As Internet of Things (IoT) has boomed in recent years, many security issues have also been exposed. Focusing on physical layer security in wireless Internet of Things network communication, a series of security methods have been widely studied. Nevertheless, cooperative jamming methods in physical layer security to fight against collusive eavesdroppers have not been thoroughly studied yet. In this article, we study a cooperative-jamming-based physical layer secure transmission scheme for Internet of Things wireless networks in the presence of collusive eavesdroppers. We design a cooperative jamming strategy without knowing the channel state information of eavesdroppers. Considering the cooperation of multiple nodes with multiple antennas, this strategy can maximize the signal-to-interference-plus-noise ratio at an actuator (legitimate receiver). Meanwhile, the generated cooperative jamming signals can reduce the signal-to-interference-plus-noise ratio at eavesdroppers. To explore the theoretical security performance of our strategy, we perform a secrecy outage probability analysis and an asymptotic analysis. In the cases of cooperative jamming and without cooperative jamming, the closed-form expressions of the secrecy outage probability are deduced, and the influence of system parameters on the secrecy outage probability becomes more intuitive through a strict mathematical asymptotic behavior analysis. In addition, considering the energy limitation of Internet of Things devices, we propose a power allocation algorithm to minimize the total transmission power given the security requirements. The numerical results show the effectiveness of our schemes and are consistent with the theoretical analysis.
As Internet of Things (IoT) has boomed in recent years, many security issues have also been exposed. Focusing on physical layer security in wireless Internet of Things network communication, a series of security methods have been widely studied. Nevertheless, cooperative jamming methods in physical layer security to fight against collusive eavesdroppers have not been thoroughly studied yet. In this article, we study a cooperative-jamming-based physical layer secure transmission scheme for Internet of Things wireless networks in the presence of collusive eavesdroppers. We design a cooperative jamming strategy without knowing the channel state information of eavesdroppers. Considering the cooperation of multiple nodes with multiple antennas, this strategy can maximize the signal-to-interference-plus-noise ratio at an actuator (legitimate receiver). Meanwhile, the generated cooperative jamming signals can reduce the signal-to-interference-plus-noise ratio at eavesdroppers. To explore the theoretical security performance of our strategy, we perform a secrecy outage probability analysis and an asymptotic analysis. In the cases of cooperative jamming and without cooperative jamming, the closed-form expressions of the secrecy outage probability are deduced, and the influence of system parameters on the secrecy outage probability becomes more intuitive through a strict mathematical asymptotic behavior analysis. In addition, considering the energy limitation of Internet of Things devices, we propose a power allocation algorithm to minimize the total transmission power given the security requirements. The numerical results show the effectiveness of our schemes and are consistent with the theoretical analysis.
With the great-leap-forward development of Internet of Things (IoT), it is extremely important to study secure wireless transmission for IoT systems. A cooperative jamming (CJ) strategy has been extensively studied to enhance physical layer security in IoT systems. However, CJ's secrecy performance has not been well studied in the scenario of collusive eavesdroppers. In this paper, we propose a CJ scheme for IoT systems to fight against multiple passive and collusive eavesdroppers of unknown channel state information. Considering nodes with multi-antenna in an IoT system, we design beamforming vectors to maximize signal-to- interference-plus-noise ratio (SINR) of the wireless link from a controller (transmitter) to an actuator (receiver). Under the worst-case assumption that eavesdroppers can aggregate all signals to enhance their eavesdropping abilities, we derive the closed- form expressions of the secrecy outage probability (SOP) with and without CJ. In addition, we employ a strict mathematical asymptotic analysis to provide insights into the effects of various system parameters on the SOP. Numerical results verify that the CJ scheme can effectively prevent eavesdropping and the effects of system parameters on SOP is consistent with theoretical analytical results.
Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.
An aim of Internet-of-Things (IoT) networks is to enable smart cities by connecting billions of devices for various applications. Such a massive connectivity can face many vital challenges, one of which is security. Accordingly, we propose a Cooperative Jamming (CJ) scheme for multihop IoT networks, where each transmitted symbol is protected by two hybrid-duplex jamming nodes from randomly located colluding eavesdroppers. Our proposed scheme provides a significant performance enhancement compared to a conventional Single Jamming (SJ) approach, at no additional power cost. In particular, to achieve a secrecy outage probability of 10−1, and assuming the number of hops is 8, the proposed CJ scheme outperforms the SJ case by 3.5 dB of jamming Signal-to-Noise Ratio (SNR). Integral closed-form expressions are derived for the secrecy outage probability and verified via Monte Carlo simulations.
Existing studies on physical layer security (PLS) for uplink communications often assume a pseudo-random sequence (PRS)-based cooperative jamming, which enables the base station (BS) to perfectly cancel the jamming signal. However, the assumption of the pre-shared PRS leads to practical challenges, e.g., the key sharing problem, especially in Internet of Things (IoT) systems. To resolve the issues, this work proposes a novel PLS scheme utilizing the unique feature of fluid antenna (FA) systems, i.e., full exploitation of spatial degrees of freedom (DoFs). In particular, for uplink IoT systems, we introduce an FA-aided cooperative jamming scheme in which all single FA devices except for a legitimate device play the role of jammers to protect the communication of the legitimate parties. To this end, we propose an FA port selection strategy to maximize the received signal-to-interference-plus-noise ratio (SINR) of the legitimate parties and derive analytic expressions of the outage probability (OP) and the secrecy outage probability (SOP). In addition, in the interference-limited scenario, we develop more insightful closed-form expressions of OP and SOP, which allow one to capture important behaviors of the designed system. Then, we formulate an optimization problem that aims to maximize secrecy throughput by jointly optimizing the jamming power, transmission rate, and secrecy rate. To tackle the non-convexity of the problem, we develop a technique in which the minorization-maximization and the alternating optimization techniques are judiciously combined. Performance evaluations demonstrate that the proposed scheme can outperform the PRS-based scheme in practical IoT scenarios.
This paper investigates cooperative security in wireless networks, where a source (Alice) intends to transmit a confidential message to a legitimate destination (Bob), with the help of a cooperative jammer (Charlie), coexisting with multiple passive eavesdroppers (Eves). In particular, by assuming knowledge of Bob's perfect channel state information (CSI) but only Eves’ statistical CSIs, secrecy beamforming with artificial noise (AN) is utilized for secure transmission, and cooperative jamming (CJ) is explored to further enhance secrecy. We first derive an accurate closed-form expression for the secrecy outage probability (SOP), and establish the condition under which positive secrecy rate is achievable. Then, we provide a secure transmit design for maximizing the SOP constrained secrecy rate. Moreover, based on a strict mathematical analysis, we characterize the impact of the main channel quality and the number of Eves on transmit design and secrecy performance. Specifically, optimal power allocation ratio between the information-bearing signal and the AN signal increases as the main channel quality improves, and decreases with the number of Eves. Numerical results confirm that our design achieves performance improvement in terms of both secrecy rate and secure energy efficiency, as compared to the approach without CJ.
Security has become an increasingly important issue in wireless communications for the IoT (Internet of Things) environments, to which physical layer approaches can contribute by differentiating desired transceiver and wiretap channels for security of confidential data. In this paper, we propose an optimal power allocation strategy for practical physical-layer security, based on friendly jamming with cancellation for anti-eavesdropping. In particular, secrecy outage probability is evaluated in scenarios involving a pair of transmitter-receiver and a passive eavesdropper near the receiver. We derive the optimal power allocation strategy and the required cancellation capability to enhance secrecy performance. Numerical results verify the tradeoff between jamming power ratio and cancellation capability. Furthermore, our proposed scheme can achieve the improved secrecy rate regardless of availability of eavesdropper channel information.