Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Suspended Trace Air-Gap Resonators for Low Loss Superconducting Circuits

Fang, Michael Tianyu

Published Jun 1, 2020• 0 citations
Publisher

Abstract

Quantum memories and networks for distributed quantum information processing require links between the microwave, mechanical, and optical domains. Coherent integration of long-lived superconducting qubits (SCQs) with optomechanical and photonic devices (OMPDs) remains an outstanding challenge. We present a step towards coherent integration using a suspended trace air-gap resonator (STAR): a superconducting resonator on a silicon-on-insulator (SOI) substrate with the signal trace suspended by silicon tethers above and between galvanically connected ground metal planes. As a result, the electric field energy is closely confined within the microwave structure, yielding lower crosstalk compared to conventional coplanar waveguides (CPW). An order of magnitude improvement in the quality factors for STAR over previous work on SOI is achieved, in a transverse cross-sectional area that is an order of magnitude more compact. Electric field participation in lossy bulk dielectrics, a dominant source of energy leakage in previous measurements of aluminum CPW resonators on SOI, is virtually eliminated in STAR. The loss from the metal-air interface now dominates, but can be reduced by several factors using superconductors with better surface properties. Most importantly, STAR fabrication is compatible with Josephson junction and air-bridge deposition for highly coherent integration of SCQs and OMPDs to realize proposals for quantum information storage and networking.

DOI
10.7907/6teq-md72

Related papers

Optimizing Interface Dielectric Loss in Superconducting Coplanar Waveguide Resonators for Improved Quantum Circuit Coherence

Omar A. Saleh, Saleem G. Rao, Mohammed Alghadeer +2 more

Superconducting quantum computing systems, including coplanar waveguide (CPW) resonators and qubits, are highly susceptible to energy dissipation from two-level systems (TLS) within bulk and interfacial dielectrics. CPW resonators serve as an ideal platform for characterizing these material losses at the single-photon excitation level. Building on recent experimental evidence that interface engineering can mitigate TLS losses, this study employs simulations to evaluate resonator quality factors across various interface modifications. Our results demonstrate that reducing losses at the substrate–air (SA) interface can increase the internal quality factor Qi by up to three orders of magnitude. While etching the SA interface also enhances Qi, material loss remains the dominant dissipation mechanism. Furthermore, we find that other lossy interfaces have a significantly smaller impact on the quality factor compared to the SA interface. These simulation results align with established experimental findings, providing a robust framework for refining resonator design. This work offers precise guidelines for TLS mitigation, essential for enhancing coherence times and developing more reliable superconducting quantum processors.

Technologies•Feb 18, 2026•0 citations

Suspended NbN superconducting resonator for reducing intrinsic losses

Youcef Ataellah Bioud, Alexandre Rousseau, Clément Godfrin +3 more

Superconducting coplanar waveguide (CPW) microwave resonators are crucial elements in Photon detectors, Quantum-limited parametric amplifiers, Narrow-band filters, Read-out, interconnect in quantum processors and Hybrid devices, connecting solid-state spins with superconducting circuits [1-3]. In the quantum regime, the dominant loss mechanism for high-Q superconducting resonators can be attributed to parasitic two-level systems (TLSs) in the dielectrics. Interface TLSs are common by products of the fabrication process, often introduced by impurities associated with Si surfaces [3]. To reduce intrinsic losses, we employ isotropic deep reactive-ion etching (DRIE) of Si substrate to create suspended NbN superconducting resonators (SSR).In this study, thin films of niobium (Nb) and niobium nitride (NbN) are deposited on Si substrate by a DC magnetron sputtering system. The influence of the N2/Ar gas ratio, the deposition current, the substrate bias potential on the superconducting critical temperature of the films are investigated. Plasma etching of Nb and NbN in a SF6 and Cl2-BCl3 gas plasma is studied using an inductively coupled plasma (icp) reactor. Parametric studies on the effects of total gas flow rate and chamber pressure on the edge angles and etch rates are reported. Finally, the suspended NbN superconducting resonator is fabricated and will be tested. This could be applied to the fabrication of superconducting qubits in integrated circuits, offering a path towards longer qubit coherence times.Reference:[1] Landig et al. Coherent spin–photon coupling using a resonant exchange qubit. Nature 560, 179–184 (2018)[2] Tosi et al. Silicon quantum processor with robust long-distance qubit couplings. Nat Commun 8, 450 (2017)[3] Bruno et al. Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates, Appl. Phys. Lett. 106, 182601 (2015)[4] Kennedy et al. Tunable Nb Superconducting Resonator Based on a Constriction Nano-SQUID Fabricated with a Ne Focused Ion Beam, Phys. Rev. Applied 11, 014006 (2019).

•Nov 11, 2019•0 citations

High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices

E. V. Zikiy, A. I. Ivanov, Nikita S. Smirnov +7 more

Abstract Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5 × 106 at high powers and 2 × 106 (with the best value of 4.4 × 106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7–10.5 um center trace on high-resistivity silicon substrates commonly used in Josephson-junction based quantum circuit. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges’ positions and extra process steps on the overall dielectric losses. The best quality factors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.

arXiv:2306.16301•Scientific Reports•Sep 20, 2023•35 citations

Comparison of dielectric loss in titanium nitride and aluminum superconducting resonators

Alexander J. Melville, Greg Calusine, Wayne H. Woods +8 more

Lossy dielectrics are a significant source of decoherence in superconducting quantum circuits. In this report, we model and compare the dielectric loss in bulk and interfacial dielectrics in titanium nitride (TiN) and aluminum (Al) superconducting coplanar waveguide resonators. We fabricate isotropically trenched resonators to produce a series of device geometries that accentuate a specific dielectric region's contribution to the resonator quality factor. While each dielectric region contributes significantly to loss in TiN devices, the metal–air interface dominates the loss in the Al devices. Furthermore, we evaluate the quality factor of each TiN resonator geometry with and without a post-process hydrofluoric etch and find that it reduced losses from the substrate–air interface, thereby improving the quality factor.

arXiv:2007.07338•Applied Physics Letters•Sep 21, 2020•76 citations

Superconducting quantum memory with a suspended coaxial resonator

Lev Krayzman, Chan U Lei, Suhas Ganjam +3 more

A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: by traditionally machining them out of bulk material and by lithographically fabricating them on a chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to achieve high material quality. On-chip resonators can use low-loss thin films, but they confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling as it relaxes the importance of the package and permits modular construction with separately replaceable qubit and resonator devices.

arXiv:2402.09504•Applied Physics Letters•May 13, 2024•6 citations

Niobium air bridges as low-loss components for superconducting quantum hardware

N. Bruckmoser, L. Koch, I. Tsitsilin +12 more

Scaling up superconducting quantum processors necessitates the use of a high routing density for readout and control lines, relying on low-loss interconnects to maintain design flexibility and device performance. We propose and demonstrate a universal subtractive fabrication process for air bridges based on an aluminum hard mask and niobium as the superconducting film. Using this technology, we fabricate superconducting coplanar waveguide resonators incorporating several niobium air bridges in and across their center conductors. Through rigorous cleaning methods, we achieve mean internal quality factors in the single-photon limit exceeding Q int = 8.2 × 10 6 . Notably, the loss per air bridge remains below the detection threshold of the resonators. Due to the larger superconducting energy gap of niobium, compared with conventional aluminum air bridges, our approach enables stable performance at elevated temperatures and magnetic fields, which we experimentally confirm in temperatures up to 3.9 K and in a magnetic field of up to 1.60 T. Additionally, we utilize air bridges to realize low-loss vacuum-gap capacitors and demonstrate their successful integration in transmon qubits by achieving median qubit lifetimes of T 1 = 51.6 μ s .

arXiv:2503.12076•Physical Review Applied•Dec 9, 2025•11 citations
Quantum memories and networks for distributed quantum information processing require links between the microwave, mechanical, and optical domains. Coherent integration of long-lived superconducting qubits (SCQs) with optomechanical and photonic devices (OMPDs) remains an outstanding challenge. We present a step towards coherent integration using a suspended trace air-gap resonator (STAR): a superconducting resonator on a silicon-on-insulator (SOI) substrate with the signal trace suspended by silicon tethers above and between galvanically connected ground metal planes. As a result, the electric field energy is closely confined within the microwave structure, yielding lower crosstalk compared to conventional coplanar waveguides (CPW). An order of magnitude improvement in the quality factors for STAR over previous work on SOI is achieved, in a transverse cross-sectional area that is an order of magnitude more compact. Electric field participation in lossy bulk dielectrics, a dominant source of energy leakage in previous measurements of aluminum CPW resonators on SOI, is virtually eliminated in STAR. The loss from the metal-air interface now dominates, but can be reduced by several factors using superconductors with better surface properties. Most importantly, STAR fabrication is compatible with Josephson junction and air-bridge deposition for highly coherent integration of SCQs and OMPDs to realize proposals for quantum information storage and networking.
Superconducting quantum computing systems, including coplanar waveguide (CPW) resonators and qubits, are highly susceptible to energy dissipation from two-level systems (TLS) within bulk and interfacial dielectrics. CPW resonators serve as an ideal platform for characterizing these material losses at the single-photon excitation level. Building on recent experimental evidence that interface engineering can mitigate TLS losses, this study employs simulations to evaluate resonator quality factors across various interface modifications. Our results demonstrate that reducing losses at the substrate–air (SA) interface can increase the internal quality factor Qi by up to three orders of magnitude. While etching the SA interface also enhances Qi, material loss remains the dominant dissipation mechanism. Furthermore, we find that other lossy interfaces have a significantly smaller impact on the quality factor compared to the SA interface. These simulation results align with established experimental findings, providing a robust framework for refining resonator design. This work offers precise guidelines for TLS mitigation, essential for enhancing coherence times and developing more reliable superconducting quantum processors.
Superconducting coplanar waveguide (CPW) microwave resonators are crucial elements in Photon detectors, Quantum-limited parametric amplifiers, Narrow-band filters, Read-out, interconnect in quantum processors and Hybrid devices, connecting solid-state spins with superconducting circuits [1-3]. In the quantum regime, the dominant loss mechanism for high-Q superconducting resonators can be attributed to parasitic two-level systems (TLSs) in the dielectrics. Interface TLSs are common by products of the fabrication process, often introduced by impurities associated with Si surfaces [3]. To reduce intrinsic losses, we employ isotropic deep reactive-ion etching (DRIE) of Si substrate to create suspended NbN superconducting resonators (SSR).In this study, thin films of niobium (Nb) and niobium nitride (NbN) are deposited on Si substrate by a DC magnetron sputtering system. The influence of the N2/Ar gas ratio, the deposition current, the substrate bias potential on the superconducting critical temperature of the films are investigated. Plasma etching of Nb and NbN in a SF6 and Cl2-BCl3 gas plasma is studied using an inductively coupled plasma (icp) reactor. Parametric studies on the effects of total gas flow rate and chamber pressure on the edge angles and etch rates are reported. Finally, the suspended NbN superconducting resonator is fabricated and will be tested. This could be applied to the fabrication of superconducting qubits in integrated circuits, offering a path towards longer qubit coherence times.Reference:[1] Landig et al. Coherent spin–photon coupling using a resonant exchange qubit. Nature 560, 179–184 (2018)[2] Tosi et al. Silicon quantum processor with robust long-distance qubit couplings. Nat Commun 8, 450 (2017)[3] Bruno et al. Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates, Appl. Phys. Lett. 106, 182601 (2015)[4] Kennedy et al. Tunable Nb Superconducting Resonator Based on a Constriction Nano-SQUID Fabricated with a Ne Focused Ion Beam, Phys. Rev. Applied 11, 014006 (2019).
Abstract Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5 × 106 at high powers and 2 × 106 (with the best value of 4.4 × 106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7–10.5 um center trace on high-resistivity silicon substrates commonly used in Josephson-junction based quantum circuit. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges’ positions and extra process steps on the overall dielectric losses. The best quality factors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.
Lossy dielectrics are a significant source of decoherence in superconducting quantum circuits. In this report, we model and compare the dielectric loss in bulk and interfacial dielectrics in titanium nitride (TiN) and aluminum (Al) superconducting coplanar waveguide resonators. We fabricate isotropically trenched resonators to produce a series of device geometries that accentuate a specific dielectric region's contribution to the resonator quality factor. While each dielectric region contributes significantly to loss in TiN devices, the metal–air interface dominates the loss in the Al devices. Furthermore, we evaluate the quality factor of each TiN resonator geometry with and without a post-process hydrofluoric etch and find that it reduced losses from the substrate–air interface, thereby improving the quality factor.
A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: by traditionally machining them out of bulk material and by lithographically fabricating them on a chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to achieve high material quality. On-chip resonators can use low-loss thin films, but they confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling as it relaxes the importance of the package and permits modular construction with separately replaceable qubit and resonator devices.
Scaling up superconducting quantum processors necessitates the use of a high routing density for readout and control lines, relying on low-loss interconnects to maintain design flexibility and device performance. We propose and demonstrate a universal subtractive fabrication process for air bridges based on an aluminum hard mask and niobium as the superconducting film. Using this technology, we fabricate superconducting coplanar waveguide resonators incorporating several niobium air bridges in and across their center conductors. Through rigorous cleaning methods, we achieve mean internal quality factors in the single-photon limit exceeding Q int = 8.2 × 10 6 . Notably, the loss per air bridge remains below the detection threshold of the resonators. Due to the larger superconducting energy gap of niobium, compared with conventional aluminum air bridges, our approach enables stable performance at elevated temperatures and magnetic fields, which we experimentally confirm in temperatures up to 3.9 K and in a magnetic field of up to 1.60 T. Additionally, we utilize air bridges to realize low-loss vacuum-gap capacitors and demonstrate their successful integration in transmon qubits by achieving median qubit lifetimes of T 1 = 51.6 μ s .