Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Science

Good timing for microwave technology

Ian S. Osborne

Published May 21, 2020• 0 citations
Publisher

Abstract

Metrology Timing standards around the world define the second using atomic clocks, specifically the microwave frequencies emitted from trapped atoms. Optical clocks, which are based on optical transitions of atoms, operate at much higher frequency and have been shown to exhibit better stability. Nakamura et al. demonstrate a framework that carries the improved stability of the optical domain over to microwaves (see the Perspective by Curtis). In addition to contributing to the eventual redefinition of the second based on optical clocks, this work will also lead to improvements in microwave-based technologies such as astronomical imaging and geodesy through very long baseline interferometry, radar, communications, and navigation systems. Science , this issue p. [889][1]; see also p. [825][2] [1]: /lookup/doi/10.1126/science.abb2473 [2]: /lookup/doi/10.1126/science.abb8629

DOI
10.1126/science.368.6493.840-n

Related papers

Coherent optical clock down-conversion for microwave frequencies with 10 −18 instability

Takuma Nakamura, Josue Davila-Rodriguez, Holly Leopardi +12 more

Good timing for microwave technology Timing standards around the world define the second using atomic clocks, specifically the microwave frequencies emitted from trapped atoms. Optical clocks, which are based on optical transitions of atoms, operate at much higher frequency and have been shown to exhibit better stability. Nakamura et al. demonstrate a framework that carries the improved stability of the optical domain over to microwaves (see the Perspective by Curtis). In addition to contributing to the eventual redefinition of the second based on optical clocks, this work will also lead to improvements in microwave-based technologies such as astronomical imaging and geodesy through very long baseline interferometry, radar, communications, and navigation systems. Science , this issue p. 889 ; see also p. 825

arXiv:2003.02923•Science•May 21, 2020•169 citations

Optical atomic clocks: defining the future of time and frequency metrology

Tara M. Fortier, Andre Nicholas Luiten, Helen S. Margolis

Optical atomic clocks based on laser-cooled trapped ions and atoms have advanced rapidly over the past decade. With fractional frequency uncertainties now surpassing 10 −18 , they are some of the most precise measurement tools ever built. Yet researchers are still pursuing new avenues of research to explore the fundamental limits to their stability, accuracy, and reproducibility. In this mini-review, we provide a survey of the current state of the art by describing the fundamental principles and techniques that underpin this progress, the architectures used to realize optical clocks, and the supporting laser technologies that are essential to their operation. We also examine the progress that has been made toward a redefinition of the second in the International System of Units and the inclusion of optical clocks into the global time and frequency metrology infrastructure. Finally, we discuss emerging applications of optical clocks and look at the prospects for making their precision more readily accessible to end users.

Optica•Dec 10, 2025•22 citations

particular 'magic' wavelengths. This Review covers the experimental realizations of such clocks, the optimal design of optical lattices and recent demonstrations of improved stability for large numbers of atoms. Possible impacts and future applications of optical lattice clocks are also discussed, such as testing the fundamental laws of physics and developing relativistic geodesy.

Louis Essen

8half a century ago and have provided the definition of the second since 1967. The international atomic time (TAI) is currently kept by an ensemble of Cs clocks with a fractional uncertainty of Δν/ν0 ≈ 10 –15 , and some Cs fountain clocks 9,10 operate at even smaller uncertainties. Although Cs atomic clocks operate at the microwave transition of ν0 ≈ 9.2 GHz, using optical transition frequencies of several hundred terahertz should improve the fractional uncertainty Δν/ν0 by 4–5 orders of magnitude, as most measurement uncertainties Δν are independent of ν0 (except the Doppler shift Δ νD = (v/c)ν0, where v is the atomic velocity and c is the speed of light). The invention of the laser and the subsequent improvement of laser frequency stabilities 11 has allowed the realization of optical clocks to become a reality 2,3,12

•Jan 1, 2011•0 citations

Trapped strontium ion optical clock

G. P. Barwood, Patrick Robert Gill, Hugh A. Klein +6 more

Increasingly stringent demands on atomic timekeeping, driven by applications such as global navigation satellite systems (GNSS), communications, and very-long baseline interferometry (VBLI) radio astronomy, have motivated the development of improved time and frequency standards. There are many scientific applications of such devices in space.

International Conference on Space Optics (ICSO)•Nov 21, 2017•3 citations

Trapped-ion optical Atomic Clocks at the Quantum Limits

David R. Leibrandt, Samuel M. Brewer, Jwo-Sy Chen +4 more

Frequency and its inverse, time, are the most accurately measured quantities. Historically, improvements in the accuracy of clocks have enabled advances in navigation, communication, and science. Since 1967, the definition of the International System (SI) second has been based on the frequency of a microwave transition in cesium, and present day cesium atomic clocks have a fractional uncertainty near 10-16. Recently, a new type of atomic clock based on optical transitions has been developed, with a current fractional uncertainty near 10-18 (approximately one second divided by the age of the universe), and they are rapidly improving. This talk presents a brief summary of the development of optical atomic clocks, with a focus on the Al+ quantum-logic clock developed at NIST. We discuss the current state-of-the-art in optical clock performance, and describe new applications in sensing and fundamental physics. Future directions in optical atomic clock research are also considered.

Proceedings of the ... annual Precise Time and Time Interval (PTTI) Systems and Applications Meeting/Proceedings of a meeting - Precise Time and Time Interval (PTTI) Systems and Applications Meeting•Mar 7, 2017•2 citations

Development of a strontium optical lattice clock for space applicationss

Singh Y., Smith L., Stefano Origlia +24 more

With timekeeping being of paramount importance for modern life, much research and major scientific advances have been undertaken in the field of frequency metrology, particularly over the last few years. New Nobel-prize winning technologies have enabled a new era of atomic clocks; namely the optical clock. These have been shown to perform significantly better than the best microwave clocks reaching an inaccuracy of 1.6 10^-18. With such results being found in large lab based apparatus, the focus now has shifted to portability - to enable the accuracy of various ground based clocks to be measured, and compact autonomous performance - to enable such technologies to be tested in space. This could lead to a master clock in space, improving not only the accuracy of technologies on which modern life has come to require such as GPS and communication networks. But also more fundamentally, this could lead to the redefinition of the second and tests of fundamental physics. Within the European collaboration, Space Optical Clocks (SOC2) consisting of various institutes and industry partners across Europe we have tried to tackle this problem of miniaturisation whilst maintaining stability, accuracy (5 10^-17) and robustness whilst keeping power consumption to a minimum -- necessary for space applications. We will present the most recent results of the Sr optical clock in SOC2 and also the novel compact design features, new methods employed and outlook.

•Jan 1, 2015•0 citations
Metrology
Timing standards around the world define the second using atomic clocks, specifically the microwave frequencies emitted from trapped atoms. Optical clocks, which are based on optical transitions of atoms, operate at much higher frequency and have been shown to exhibit better stability. Nakamura et al. demonstrate a framework that carries the improved stability of the optical domain over to microwaves (see the Perspective by Curtis). In addition to contributing to the eventual redefinition of the second based on optical clocks, this work will also lead to improvements in microwave-based technologies such as astronomical imaging and geodesy through very long baseline interferometry, radar, communications, and navigation systems.
Science , this issue p. 889; see also p. 825
Good timing for microwave technology Timing standards around the world define the second using atomic clocks, specifically the microwave frequencies emitted from trapped atoms. Optical clocks, which are based on optical transitions of atoms, operate at much higher frequency and have been shown to exhibit better stability. Nakamura et al. demonstrate a framework that carries the improved stability of the optical domain over to microwaves (see the Perspective by Curtis). In addition to contributing to the eventual redefinition of the second based on optical clocks, this work will also lead to improvements in microwave-based technologies such as astronomical imaging and geodesy through very long baseline interferometry, radar, communications, and navigation systems. Science , this issue p. 889 ; see also p. 825
Optical atomic clocks based on laser-cooled trapped ions and atoms have advanced rapidly over the past decade. With fractional frequency uncertainties now surpassing 10 −18 , they are some of the most precise measurement tools ever built. Yet researchers are still pursuing new avenues of research to explore the fundamental limits to their stability, accuracy, and reproducibility. In this mini-review, we provide a survey of the current state of the art by describing the fundamental principles and techniques that underpin this progress, the architectures used to realize optical clocks, and the supporting laser technologies that are essential to their operation. We also examine the progress that has been made toward a redefinition of the second in the International System of Units and the inclusion of optical clocks into the global time and frequency metrology infrastructure. Finally, we discuss emerging applications of optical clocks and look at the prospects for making their precision more readily accessible to end users.
8half a century ago and have provided the definition of the second since 1967. The international atomic time (TAI) is currently kept by an ensemble of Cs clocks with a fractional uncertainty of Δν/ν0 ≈ 10 –15 , and some Cs fountain clocks 9,10 operate at even smaller uncertainties. Although Cs atomic clocks operate at the microwave transition of ν0 ≈ 9.2 GHz, using optical transition frequencies of several hundred terahertz should improve the fractional uncertainty Δν/ν0 by 4–5 orders of magnitude, as most measurement uncertainties Δν are independent of ν0 (except the Doppler shift Δ νD = (v/c)ν0, where v is the atomic velocity and c is the speed of light). The invention of the laser and the subsequent improvement of laser frequency stabilities 11 has allowed the realization of optical clocks to become a reality 2,3,12
Frequency and its inverse, time, are the most accurately measured quantities. Historically, improvements in the accuracy of clocks have enabled advances in navigation, communication, and science. Since 1967, the definition of the International System (SI) second has been based on the frequency of a microwave transition in cesium, and present day cesium atomic clocks have a fractional uncertainty near 10-16. Recently, a new type of atomic clock based on optical transitions has been developed, with a current fractional uncertainty near 10-18 (approximately one second divided by the age of the universe), and they are rapidly improving. This talk presents a brief summary of the development of optical atomic clocks, with a focus on the Al+ quantum-logic clock developed at NIST. We discuss the current state-of-the-art in optical clock performance, and describe new applications in sensing and fundamental physics. Future directions in optical atomic clock research are also considered.
With timekeeping being of paramount importance for modern life, much research and major scientific advances have been undertaken in the field of frequency metrology, particularly over the last few years. New Nobel-prize winning technologies have enabled a new era of atomic clocks; namely the optical clock. These have been shown to perform significantly better than the best microwave clocks reaching an inaccuracy of 1.6 10^-18. With such results being found in large lab based apparatus, the focus now has shifted to portability - to enable the accuracy of various ground based clocks to be measured, and compact autonomous performance - to enable such technologies to be tested in space. This could lead to a master clock in space, improving not only the accuracy of technologies on which modern life has come to require such as GPS and communication networks. But also more fundamentally, this could lead to the redefinition of the second and tests of fundamental physics. Within the European collaboration, Space Optical Clocks (SOC2) consisting of various institutes and industry partners across Europe we have tried to tackle this problem of miniaturisation whilst maintaining stability, accuracy (5 10^-17) and robustness whilst keeping power consumption to a minimum -- necessary for space applications. We will present the most recent results of the Sr optical clock in SOC2 and also the novel compact design features, new methods employed and outlook.