Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A new platform for atom-light interactions on the nano-scale

William Hamlyn

Published Jan 1, 2020• 1 citation
OpenAlex

Abstract

We present the design, fabrication, and operation of a new genera-tion of thermal alkali vapour nano-cells. The nano-cells include in-ternal structures with length scales 200−2000 nm created by laserlithography and reactive ion etching. The assembly process adoptsoptical contact bonding and glassblowing, avoiding the requirementfor any bonding agents or adhesives. We demonstrate a novel methodfor characterising the size of the internal vapour nano-channels. Thedesign allows for greater optical access and compatibility with highnumerical aperture (NA=0.7) optics; we demonstrate this with totalinternal reflection fluorescence spectroscopy and high resolution ima-ging of the nano-channels. Additionally, we report for the first time onthe photon statistics of light from a thin atomic ensemble. Finally, wediscuss the diffusion of atoms inside confined geometries with a num-ber of detection methods, and investigate options for controlling andmanipulating the atomic density and its diffusion. In total, we presentour new nano-cell design as a significant advancement of the field andpropose its use in scalable atomic and quantum optics applications andtechnologies.

Related papers

Nanostructured Alkali-Metal Vapor Cells

T.F. Cutler, W.J. Hamlyn, J. Renger +5 more

The confinement of atoms at the nanoscale is of interest for a diverse range of applications, from spatially selective sensing on the submicrometer scale to emerging quantum technologies. This study describes a bespoke method for manufacturing robust vapor cells with arbitrary nanoscale-confinement geometries. The device is designed with versatile, high-NA optical access. Spectroscopy of Rb atoms in purpose-built cells yields important insight into the diffusion and spatial distribution of a thermal vapor confined to a nanochannel. This work offers routes toward engineering solutions for localized control of atom numbers for scalable quantum optical experiments.

arXiv:2004.10577•Physical Review Applied•Sep 21, 2020•46 citations

Construction and characterisation of ultra-thin alkali-metal vapour cells

Kate Whittaker

This thesis presents the study of thermal alkali-metal vapours confined in a layer with a sub-micron thickness. This confinement enables the study of high density media without the loss of signal present in usually thermal vapours, but also has additional effects on spectra acquired from the system. Such effects include the suppression of the Doppler broadening and the interaction of the atoms with nearby surfaces. Herein, we present a study of this atom-surface interaction in both Rubidium and Caesium atoms, demonstrating that the interaction follows a power law of $1/r^\alpha$, where $\alpha = 3.02 \pm 0.06$. We also study Rabi oscillations at high densities, driving GHz Rabi oscillations in a Rb vapour at densities up to $10^{17}$~cm$^{-3}$. We find that the results do not have sufficient agreement with an optical Bloch simulation, but Maxwell Bloch simulations indicate the possible presence of simultons; simultaneously propagating solitons. Such phenomena have not yet been observed out of crystalline media. We also present a study of causality relations in atomic media. We first discuss the equivalency of the Hilbert transform to the Kramers-Kronig relations, well known in signal processing, but rarely applied in atomic physics. We then demonstrate that the Hilbert transform can be applied to atomic transmission spectra to quickly generate refractive index spectra. The final section of this thesis fully details the successful design and fabrication of vapour cells with a thickness of 500-1500~nm. The cells are assembled using a combination of traditional scientific glass blowing techniques and thermally annealed optically contacted plates. We fully outline the production process, and then present evidence of their successful functionality and longevity.

•Jan 1, 2017•2 citations

Interrogation and fabrication of nm scale hot alkali vapour cells

K A Whittaker, James Keaveney, Ifan G. Hughes +5 more

Here we describe our use of cells with nm scale thickness ('nanocells') to investigate inter-atomic, atom- light and atom-surface interactions. Such cells allow us to access high density regimes previously unexplored in vapour cell spectroscopy, and to probe the interaction of atoms within the near field of surfaces, where atoms interact with their own virtual image. We also discuss the future fabrication of such cells in Durham.

Journal of Physics Conference Series•Sep 7, 2015•12 citations

Nanoscale light–matter interactions in atomic cladding waveguides

Liron Stern, Boris Desiatov, Ilya Goykhman +1 more

Alkali vapours, such as rubidium, are being used extensively in several important fields of research such as slow and stored light nonlinear optics quantum computation, atomic clocks and magnetometers. Recently, there is a growing effort towards miniaturizing traditional centimetre-size vapour cells. Owing to the significant reduction in device dimensions, light–matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for nonlinear interactions. Here, taking advantage of the mature platform of silicon photonics, we construct an efficient and flexible platform for tailored light–vapour interactions on a chip. Specifically, we demonstrate light–matter interactions in an atomic cladding waveguide, consisting of a silicon nitride nano-waveguide core with a rubidium vapour cladding. We observe the efficient interaction of the electromagnetic guided mode with the rubidium cladding and show that due to the high confinement of the optical mode, the rubidium absorption saturates at powers in the nanowatt regime. Alkali vapours are increasingly useful in photonic research and metrology applications, and they provide a useful test bed for investigating light–matter interaction. Stern et al. integrate silicon nitride waveguides with alkali vapours to study light–matter interactions on a chip-scale platform.

arXiv:1204.0393•Nature Communications•Mar 5, 2013•159 citations

Nano-Photonic Platform for Atom-Light Interaction

Su‐Peng Yu

Development of technology can allow access to new regimes in science and creation of new fields of research. The development of ultra-high finesse mirror technology enabled the development of the field of cavity quantum electrodynamics, and an abundance of wonderful physics experiments soon followed. The sophistication of the field of nano-fabrication and nano-photonics would allow unprecedented capability to mold the shape and flow of light, and provide a novel platform for efficient and hopefully integrable quantum systems. In this project, we hope to interface cold atoms, perhaps the most quintessential of quantum systems, to the engineering power of nano-photonics. We believe this field of study will not only lead to the demonstration of new physics in the quantum regime, but work toward building a network with quantum capabilities mediated by optical channels. In this project, we develop a nano-fabricated platform capable of interfacing nano-photonic devices with cold Cesium atoms in free-space. Nano-photonic waveguide devices are fabricated in a Silicon Nitride device layer on Silicon substrate. The fabrication is compatible with conventional semiconductor fabrication processes, and the chip design has been adapted to allow incorporation with free-space optics to support cold Cesium atom cloud around the waveguides. An ultra-high vacuum system that is compatible to the chip and its supporting structures was constructed to perform experiments. With our system, we were able to fabricate and characterize nano-photonic structures, including 1D photonic crystal waveguides, cavities, and 2D photonic crystal slabs. For the 1D photonic crystal waveguide devices, enhanced atom-light coupling between localized Cesium atoms in the vicinity of the devices, and also atom-atom interaction between Cesium atoms mediated by the guided mode of the photonic crystal waveguide, has been observed. The 2D photonic devices allow us many capabilities beyond that of the 1D waveguide. Demonstration of exotic optical properties including natural decay rate suppression and circular polarization engineering, should be within reach in the near future.

•Jun 5, 2017•5 citations

Integrating suspended tapered photonic waveguides with thermal alkali vapour

Benyamin Shnirman

In this work, we demonstrate - for the first time, to the best of our knowledge - electromagnetically induced transparency (EIT) on a fully integrated, chip-scale platform based on nanoscale tapered suspended waveguides surrounded by hot rubidium vapour. We further show that these waveguides enable the excitation of rubidium atoms to Rydberg states, and implement an electric readout scheme to detect these atoms by their ionisation currents. The fabrication workflow for standard ridge waveguides made of silicon nitride (Si3N4) is optimised, leading to significantly improved optical quality. Building on this, different techniques for locally suspending photonic structures out of Si3N4 are developed, allowing us to retain the waveguide interconnects between the structures on a conventional SiO2 layer for full chip integration. The use of a sacrificial silicon layer proves to be advantageous for suspending resonator structures, as this method does not change the optical properties of the device, as opposed to other established suspension methods. With these fabrication techniques, high quality suspended tapered waveguides are realised. Spectroscopy measurements on the D2 transition of rubidium confirm that the Doppler and transit time broadening are significantly reduced compared to standard ridge waveguides, owing to the extended evanescent field of the tapered geometry. After this, EIT is demonstrated on the tapered waveguides using a three level ladder scheme, benefiting from the longer atomic interaction times enabled by the extended evanescent field. The experimental results are compared to numerical simulations, showing good agreement. Finally, the excitation to Rydberg levels in the evanescent field of the tapered waveguide is investigated. An electrically contacted vapour cell is designed to detect the current from excited Rydberg atoms, ionised through collisions with ground-state atoms or perturber gases in the cell. Clear Rydberg signals are observed and compared with simulations modelling excitation and ionisation in the confined geometry of the evanescent field. The results indicate that the excitation can indeed occur within the guided mode and that the corresponding ionisation currents are of the same order of magnitude as those measured experimentally. However, strong scattering of the guided light is also observed at the transitions to the underetched regions, suggesting that a fraction of the Rydberg excitation may originate from this scattered light rather than from the evanescent field alone. Further investigations are ongoing at the time of writing to quantify this contribution.

•Jan 1, 2026•0 citations
We present the design, fabrication, and operation of a new genera-tion of thermal alkali vapour nano-cells. The nano-cells include in-ternal structures with length scales 200−2000 nm created by laserlithography and reactive ion etching. The assembly process adoptsoptical contact bonding and glassblowing, avoiding the requirementfor any bonding agents or adhesives. We demonstrate a novel methodfor characterising the size of the internal vapour nano-channels. Thedesign allows for greater optical access and compatibility with highnumerical aperture (NA=0.7) optics; we demonstrate this with totalinternal reflection fluorescence spectroscopy and high resolution ima-ging of the nano-channels. Additionally, we report for the first time onthe photon statistics of light from a thin atomic ensemble. Finally, wediscuss the diffusion of atoms inside confined geometries with a num-ber of detection methods, and investigate options for controlling andmanipulating the atomic density and its diffusion. In total, we presentour new nano-cell design as a significant advancement of the field andpropose its use in scalable atomic and quantum optics applications andtechnologies.
The confinement of atoms at the nanoscale is of interest for a diverse range of applications, from spatially selective sensing on the submicrometer scale to emerging quantum technologies. This study describes a bespoke method for manufacturing robust vapor cells with arbitrary nanoscale-confinement geometries. The device is designed with versatile, high-NA optical access. Spectroscopy of Rb atoms in purpose-built cells yields important insight into the diffusion and spatial distribution of a thermal vapor confined to a nanochannel. This work offers routes toward engineering solutions for localized control of atom numbers for scalable quantum optical experiments.
This thesis presents the study of thermal alkali-metal vapours confined in a layer with a sub-micron thickness. This confinement enables the study of high density media without the loss of signal present in usually thermal vapours, but also has additional effects on spectra acquired from the system. Such effects include the suppression of the Doppler broadening and the interaction of the atoms with nearby surfaces. Herein, we present a study of this atom-surface interaction in both Rubidium and Caesium atoms, demonstrating that the interaction follows a power law of 1/rα1/r^\alpha1/rα, where α=3.02±0.06\alpha = 3.02 \pm 0.06α=3.02±0.06. We also study Rabi oscillations at high densities, driving GHz Rabi oscillations in a Rb vapour at densities up to 101710^{17}1017~cm−3^{-3}−3. We find that the results do not have sufficient agreement with an optical Bloch simulation, but Maxwell Bloch simulations indicate the possible presence of simultons; simultaneously propagating solitons. Such phenomena have not yet been observed out of crystalline media. We also present a study of causality relations in atomic media. We first discuss the equivalency of the Hilbert transform to the Kramers-Kronig relations, well known in signal processing, but rarely applied in atomic physics. We then demonstrate that the Hilbert transform can be applied to atomic transmission spectra to quickly generate refractive index spectra. The final section of this thesis fully details the successful design and fabrication of vapour cells with a thickness of 500-1500~nm. The cells are assembled using a combination of traditional scientific glass blowing techniques and thermally annealed optically contacted plates. We fully outline the production process, and then present evidence of their successful functionality and longevity.
Alkali vapours, such as rubidium, are being used extensively in several important fields of research such as slow and stored light nonlinear optics quantum computation, atomic clocks and magnetometers. Recently, there is a growing effort towards miniaturizing traditional centimetre-size vapour cells. Owing to the significant reduction in device dimensions, light–matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for nonlinear interactions. Here, taking advantage of the mature platform of silicon photonics, we construct an efficient and flexible platform for tailored light–vapour interactions on a chip. Specifically, we demonstrate light–matter interactions in an atomic cladding waveguide, consisting of a silicon nitride nano-waveguide core with a rubidium vapour cladding. We observe the efficient interaction of the electromagnetic guided mode with the rubidium cladding and show that due to the high confinement of the optical mode, the rubidium absorption saturates at powers in the nanowatt regime. Alkali vapours are increasingly useful in photonic research and metrology applications, and they provide a useful test bed for investigating light–matter interaction. Stern et al. integrate silicon nitride waveguides with alkali vapours to study light–matter interactions on a chip-scale platform.
Development of technology can allow access to new regimes in science and creation of new fields of research. The development of ultra-high finesse mirror technology enabled the development of the field of cavity quantum electrodynamics, and an abundance of wonderful physics experiments soon followed. The sophistication of the field of nano-fabrication and nano-photonics would allow unprecedented capability to mold the shape and flow of light, and provide a novel platform for efficient and hopefully integrable quantum systems. In this project, we hope to interface cold atoms, perhaps the most quintessential of quantum systems, to the engineering power of nano-photonics. We believe this field of study will not only lead to the demonstration of new physics in the quantum regime, but work toward building a network with quantum capabilities mediated by optical channels. In this project, we develop a nano-fabricated platform capable of interfacing nano-photonic devices with cold Cesium atoms in free-space. Nano-photonic waveguide devices are fabricated in a Silicon Nitride device layer on Silicon substrate. The fabrication is compatible with conventional semiconductor fabrication processes, and the chip design has been adapted to allow incorporation with free-space optics to support cold Cesium atom cloud around the waveguides. An ultra-high vacuum system that is compatible to the chip and its supporting structures was constructed to perform experiments. With our system, we were able to fabricate and characterize nano-photonic structures, including 1D photonic crystal waveguides, cavities, and 2D photonic crystal slabs. For the 1D photonic crystal waveguide devices, enhanced atom-light coupling between localized Cesium atoms in the vicinity of the devices, and also atom-atom interaction between Cesium atoms mediated by the guided mode of the photonic crystal waveguide, has been observed. The 2D photonic devices allow us many capabilities beyond that of the 1D waveguide. Demonstration of exotic optical properties including natural decay rate suppression and circular polarization engineering, should be within reach in the near future.
In this work, we demonstrate - for the first time, to the best of our knowledge - electromagnetically induced transparency (EIT) on a fully integrated, chip-scale platform based on nanoscale tapered suspended waveguides surrounded by hot rubidium vapour. We further show that these waveguides enable the excitation of rubidium atoms to Rydberg states, and implement an electric readout scheme to detect these atoms by their ionisation currents. The fabrication workflow for standard ridge waveguides made of silicon nitride (Si3N4) is optimised, leading to significantly improved optical quality. Building on this, different techniques for locally suspending photonic structures out of Si3N4 are developed, allowing us to retain the waveguide interconnects between the structures on a conventional SiO2 layer for full chip integration. The use of a sacrificial silicon layer proves to be advantageous for suspending resonator structures, as this method does not change the optical properties of the device, as opposed to other established suspension methods. With these fabrication techniques, high quality suspended tapered waveguides are realised. Spectroscopy measurements on the D2 transition of rubidium confirm that the Doppler and transit time broadening are significantly reduced compared to standard ridge waveguides, owing to the extended evanescent field of the tapered geometry. After this, EIT is demonstrated on the tapered waveguides using a three level ladder scheme, benefiting from the longer atomic interaction times enabled by the extended evanescent field. The experimental results are compared to numerical simulations, showing good agreement. Finally, the excitation to Rydberg levels in the evanescent field of the tapered waveguide is investigated. An electrically contacted vapour cell is designed to detect the current from excited Rydberg atoms, ionised through collisions with ground-state atoms or perturber gases in the cell. Clear Rydberg signals are observed and compared with simulations modelling excitation and ionisation in the confined geometry of the evanescent field. The results indicate that the excitation can indeed occur within the guided mode and that the corresponding ionisation currents are of the same order of magnitude as those measured experimentally. However, strong scattering of the guided light is also observed at the transitions to the underetched regions, suggesting that a fraction of the Rydberg excitation may originate from this scattered light rather than from the evanescent field alone. Further investigations are ongoing at the time of writing to quantify this contribution.