Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Demonstration of a Single-Flux-Quantum Microprocessor Operating With Josephson-CMOS Hybrid Memory

Yuki Hironaka, Yuki Yamanashi, Nobuyuki Yoshikawa

Published May 12, 2020• 33 citations
Publisher

Abstract

We have been developing Josephson-CMOS hybrid memory to realize large-scale single-flux-quantum (SFQ) digital systems. In this article, we present the first demonstration of a Josephson-cryo complementary-metal-oxide-semicoductor (CMOS) memory hybrid system composed of an SFQ microprocessor and cryo-CMOS memory. We designed a single-instruction SFQ microprocessor whose data memory is implemented using Josephson-CMOS hybrid memory with a 16 × 4-b accessible address space. The Josephson and CMOS circuits were fabricated using the AIST Nb standard process and the Rohm 180-nm process, respectively. Low-frequency tests confirmed the correct operation of the single instruction SUBNEG (subtract and branch if negative), which verifies the read and write operations of data between the SFQ microprocessor and the hybrid memory. We also demonstrate the operation of an integer sorting program, which is composed of 16 SUBNEG instructions.

DOI
10.1109/tasc.2020.2994208

Related papers

Design and Implementation of a Single Flux Quantum Logic-Based Memory Controller for Josephson-CMOS Hybrid Memory Systems

Seda Demirhan, Ali Bozbey

Single flux quantum (SFQ) digital circuits have shown the potential for high speed/low power computation applications. Unfortunately, because of the low integration density and low driving capability of SFQ circuits, realizing large-scale memories by using only SFQ circuits is still a challenge. Josephson-CMOS hybrid memory, hybridizing high-speed, low power SFQ circuits, and high-density CMOS memories is already proposed as a solution to the large-scale memory problem in RSFQ digital systems. In this article, an SFQ-based memory controller which works up to 10 GHz clock frequencies is designed for Josephson-CMOS hybrid memory systems. The memory controller acts as a SFQ/CMOS interface between the SFQ circuit and SRAM module and generates the required waveforms for SRAM read and write operations. The circuit which has 4-b data and 2-b address lines is fabricated with AIST 2.5 kA/cm2STP2 process and operations of the circuits are verified. To demonstrate the scalability of the circuit, memory controller was scaled to 8-b data and 13-b address to control of the 64kb SRAM. Operations of the scaled memory controller are verified with analog simulations. Scaled circuit consumes 0.76 mW power in an area of 1.64 mm × 1.60 mm.

IEEE Transactions on Applied Superconductivity•Jul 28, 2020•5 citations

Experimental Demonstration of 1.2-Gb/s/Channel Readout Operation of Josephson–CMOS Hybrid Memory

Yuki Hironaka, Nobuyuki Yoshikawa

In this study, we aimed to achieve high-speed readout operations of Josephson–CMOS hybrid memory. We first experimentally evaluated the timing margin in the readout operations of the hybrid memory. In single-channel bit line measurements, we confirmed that the hybrid memory could work at a 1-GHz memory clock frequency with a timing margin as high as 0.63 ns. Subsequently, we designed and measured a Josephson–CMOS hybrid accumulator circuit to demonstrate high-speed read operations of the hybrid memory. The core design of the Josephson–CMOS hybrid memory follows our previous design. We introduced a sequential-access read-only CMOS memory and a single-flux-quantum accumulator into a test circuit, enabling high-speed measurement of Josephson–CMOS hybrid memory with only two high-speed external inputs. We designed and fabricated a test circuit using the Rohm 180-nm CMOS process and the AIST-ADP2 Josephson process. In the measurement, we achieved correct operation of the test circuit, including the readout operation of the 32-b hybrid memory at a memory clock frequency as high as 1.2 GHz, corresponding to a 38.4-Gb/s readout.

IEEE Transactions on Applied Superconductivity•Oct 22, 2024•1 citation

Josephson-CMOS Hybrid Memory With Nanocryotrons

Masamitsu Tanaka, Masato Suzuki, Gen Konno +3 more

We present hybridization of Josephson, CMOS, and nanocryotron (nTron) devices for a large-scale cryogenic memory application. The memory system proposed here is dynamic random access memory composed of address decoders based on an energy-efficient rapid single-flux-quantum logic, nTron line drivers, a CMOS memory cell array, and Josephson current sensors. Because drivers with voltage amplification and decoders are the major causes of power dissipation in the conventional Josephson-CMOS hybrid memory, drastic reduction in power consumption is expected. We show estimates that the power consumption of a 16-Mb memory is reduced to 1.36-2.77 mW, approximately 1/12 of the conventional Josephson-CMOS hybrid memory, and the access time is 0.78 ns for a read operation, when we assume a 65-nm CMOS process and a 1.0-μm Nb/AlOx/Nb process. In the preliminary experiment, we fabricated nTrons using NbTiN thin film that are suitable for hybrid memory implementation, and measured with eight-transistor static random access memory cells fabricated using the Rohm 0.18-μm CMOS process. We successfully triggered the nTron into the normal state, and observed output voltage of ~0.1 V at 13.5 K. The experimental results support the potential of the hybrid memory using NbTiN nTrons.

IEEE Transactions on Applied Superconductivity•Dec 30, 2016•40 citations

Access time measurements of Josephson–CMOS hybrid memory using single-flux-quantum circuits

Nobuyuki Yoshikawa, M Tokuda, T. Tomida +4 more

We have measured the access time of a 16-kbit Josephson–CMOS hybrid memory by using a single-flux-quantum (SFQ) delay measurement system. The delay measurement system is composed of a Josephson latching driver for generating input signals for the memory, an SFQ clock generator and counter for measuring the time interval, and a current-sense circuit for detecting the current output from the memory. The time resolution of the system corresponds to a clock period of the clock generator, which is 50 ps in our design. In these preliminary measurements, we have observed a memory access time of about 4 ns, where the parasitic capacitance of the bonding pad of the Josephson chip limits the access time at present. This is the first demonstration of the access time measurement of a complete Josephson–CMOS hybrid memory.

Superconductor Science and Technology•Mar 16, 2006•17 citations

Demonstration of Single-Flux-Quantum 64-B Lookup Table With Cryo-CMOS Decoders for Reconfiguration

Yuki Hironaka, Takuya Hosoya, Yuki Yamanashi +1 more

We propose a compact single-flux-quantum (SFQ) lookup table (LUT) that uses CMOS decoder circuits for reconfiguration to improve scalability. Reconfiguration by external control currents. Ann×n-bit LUT is composed of a two-dimensional array of memory cells and cryo-CMOS decoders. The memory cell at the target address is set to a logic “1” state when the correspondingx- andy-directional control currents are both applied from the CMOS decoders and is reset to logic “0” when a reset current is applied. Cryo-CMOS decoders are integrated with the SFQ LUT to reduce the number of control current lines (from 2n+1 to 2log2n+2) from the room-temperature electronics for LUT reconfiguration. For demonstration, we designed and fabricated a 64-b SFQ LUT integrated with CMOS decoders using the AIST 2.5-kA/cm2Nb standard process and the Rohm 180-nm CMOS process. Experimental results confirm the correct functionality of the SFQ LUT reconfigured by the CMOS decoders. All operating SFQ memory cells in the experiment showed almost the same control current margins. The proposed reconfiguration method is scalable in terms of the number of interconnections and control current margins for SFQ memory cells.

IEEE Transactions on Applied Superconductivity•Jul 18, 2022•5 citations

High-Speed Operation of Random-Access-Memory-Embedded Microprocessor With Minimal Instruction Set Architecture Based on Rapid Single-Flux-Quantum Logic

Ryo Sato, Yuki Hatanaka, Yuki Ando +4 more

We present design and experimental results of a rapid single-flux-quantum (RSFQ) bit-serial microprocessor with reduced-size embedded random access memories (RAMs) and with a minimal instruction set, called CORE e2h. The microprocessors called CORE e series have been developed for demonstrating small-scale program execution, such as loop calculation and sorting, in order to show the first prototype of a stored-program computer using the RSFQ technology. The CORE e2h is the most simplified variation of the CORE e series, which is equipped with only two registers, and can execute 13 instructions. The target clock frequency for bit-serial operation is 50 GHz, while the designed system clock cycle is 2 GHz. We carefully designed every component, implementing functionality using a small number of Josephson junctions with a small footprint. We fabricated several chips of the CORE e2h microprocessor integrated with two 128-bit shift-register-based RAMs on the same die. We experimentally obtained correct operations for all the instructions, and confirmed high-speed transfer between the instruction memory and controller unit and between the data memory and datapath at around 50 GHz.

IEEE Transactions on Applied Superconductivity•Dec 20, 2016•65 citations
We have been developing Josephson-CMOS hybrid memory to realize large-scale single-flux-quantum (SFQ) digital systems. In this article, we present the first demonstration of a Josephson-cryo complementary-metal-oxide-semicoductor (CMOS) memory hybrid system composed of an SFQ microprocessor and cryo-CMOS memory. We designed a single-instruction SFQ microprocessor whose data memory is implemented using Josephson-CMOS hybrid memory with a 16 × 4-b accessible address space. The Josephson and CMOS circuits were fabricated using the AIST Nb standard process and the Rohm 180-nm process, respectively. Low-frequency tests confirmed the correct operation of the single instruction SUBNEG (subtract and branch if negative), which verifies the read and write operations of data between the SFQ microprocessor and the hybrid memory. We also demonstrate the operation of an integer sorting program, which is composed of 16 SUBNEG instructions.
Single flux quantum (SFQ) digital circuits have shown the potential for high speed/low power computation applications. Unfortunately, because of the low integration density and low driving capability of SFQ circuits, realizing large-scale memories by using only SFQ circuits is still a challenge. Josephson-CMOS hybrid memory, hybridizing high-speed, low power SFQ circuits, and high-density CMOS memories is already proposed as a solution to the large-scale memory problem in RSFQ digital systems. In this article, an SFQ-based memory controller which works up to 10 GHz clock frequencies is designed for Josephson-CMOS hybrid memory systems. The memory controller acts as a SFQ/CMOS interface between the SFQ circuit and SRAM module and generates the required waveforms for SRAM read and write operations. The circuit which has 4-b data and 2-b address lines is fabricated with AIST 2.5 kA/cm2STP2 process and operations of the circuits are verified. To demonstrate the scalability of the circuit, memory controller was scaled to 8-b data and 13-b address to control of the 64kb SRAM. Operations of the scaled memory controller are verified with analog simulations. Scaled circuit consumes 0.76 mW power in an area of 1.64 mm × 1.60 mm.
In this study, we aimed to achieve high-speed readout operations of Josephson–CMOS hybrid memory. We first experimentally evaluated the timing margin in the readout operations of the hybrid memory. In single-channel bit line measurements, we confirmed that the hybrid memory could work at a 1-GHz memory clock frequency with a timing margin as high as 0.63 ns. Subsequently, we designed and measured a Josephson–CMOS hybrid accumulator circuit to demonstrate high-speed read operations of the hybrid memory. The core design of the Josephson–CMOS hybrid memory follows our previous design. We introduced a sequential-access read-only CMOS memory and a single-flux-quantum accumulator into a test circuit, enabling high-speed measurement of Josephson–CMOS hybrid memory with only two high-speed external inputs. We designed and fabricated a test circuit using the Rohm 180-nm CMOS process and the AIST-ADP2 Josephson process. In the measurement, we achieved correct operation of the test circuit, including the readout operation of the 32-b hybrid memory at a memory clock frequency as high as 1.2 GHz, corresponding to a 38.4-Gb/s readout.
We present hybridization of Josephson, CMOS, and nanocryotron (nTron) devices for a large-scale cryogenic memory application. The memory system proposed here is dynamic random access memory composed of address decoders based on an energy-efficient rapid single-flux-quantum logic, nTron line drivers, a CMOS memory cell array, and Josephson current sensors. Because drivers with voltage amplification and decoders are the major causes of power dissipation in the conventional Josephson-CMOS hybrid memory, drastic reduction in power consumption is expected. We show estimates that the power consumption of a 16-Mb memory is reduced to 1.36-2.77 mW, approximately 1/12 of the conventional Josephson-CMOS hybrid memory, and the access time is 0.78 ns for a read operation, when we assume a 65-nm CMOS process and a 1.0-μm Nb/AlOx/Nb process. In the preliminary experiment, we fabricated nTrons using NbTiN thin film that are suitable for hybrid memory implementation, and measured with eight-transistor static random access memory cells fabricated using the Rohm 0.18-μm CMOS process. We successfully triggered the nTron into the normal state, and observed output voltage of ~0.1 V at 13.5 K. The experimental results support the potential of the hybrid memory using NbTiN nTrons.
We have measured the access time of a 16-kbit Josephson–CMOS hybrid memory by using a single-flux-quantum (SFQ) delay measurement system. The delay measurement system is composed of a Josephson latching driver for generating input signals for the memory, an SFQ clock generator and counter for measuring the time interval, and a current-sense circuit for detecting the current output from the memory. The time resolution of the system corresponds to a clock period of the clock generator, which is 50 ps in our design. In these preliminary measurements, we have observed a memory access time of about 4 ns, where the parasitic capacitance of the bonding pad of the Josephson chip limits the access time at present. This is the first demonstration of the access time measurement of a complete Josephson–CMOS hybrid memory.
We propose a compact single-flux-quantum (SFQ) lookup table (LUT) that uses CMOS decoder circuits for reconfiguration to improve scalability. Reconfiguration by external control currents. Ann×n-bit LUT is composed of a two-dimensional array of memory cells and cryo-CMOS decoders. The memory cell at the target address is set to a logic “1” state when the correspondingx- andy-directional control currents are both applied from the CMOS decoders and is reset to logic “0” when a reset current is applied. Cryo-CMOS decoders are integrated with the SFQ LUT to reduce the number of control current lines (from 2n+1 to 2log2n+2) from the room-temperature electronics for LUT reconfiguration. For demonstration, we designed and fabricated a 64-b SFQ LUT integrated with CMOS decoders using the AIST 2.5-kA/cm2Nb standard process and the Rohm 180-nm CMOS process. Experimental results confirm the correct functionality of the SFQ LUT reconfigured by the CMOS decoders. All operating SFQ memory cells in the experiment showed almost the same control current margins. The proposed reconfiguration method is scalable in terms of the number of interconnections and control current margins for SFQ memory cells.
We present design and experimental results of a rapid single-flux-quantum (RSFQ) bit-serial microprocessor with reduced-size embedded random access memories (RAMs) and with a minimal instruction set, called CORE e2h. The microprocessors called CORE e series have been developed for demonstrating small-scale program execution, such as loop calculation and sorting, in order to show the first prototype of a stored-program computer using the RSFQ technology. The CORE e2h is the most simplified variation of the CORE e series, which is equipped with only two registers, and can execute 13 instructions. The target clock frequency for bit-serial operation is 50 GHz, while the designed system clock cycle is 2 GHz. We carefully designed every component, implementing functionality using a small number of Josephson junctions with a small footprint. We fabricated several chips of the CORE e2h microprocessor integrated with two 128-bit shift-register-based RAMs on the same die. We experimentally obtained correct operations for all the instructions, and confirmed high-speed transfer between the instruction memory and controller unit and between the data memory and datapath at around 50 GHz.