Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.
Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.
The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.
The Quantum Approximate Optimization Algorithm (QAOA) is a variational quantum algorithm for Near-term Intermediate-Scale Quantum computers (NISQ) providing approximate solutions for combinatorial optimization problems. The QAOA utilizes a quantum-classical loop, consisting of a quantum ansatz and a classical optimizer, to minimize some cost function, computed on the quantum device. This paper presents an investigation into the impact of realistic noise on the classical optimizer and the determination of optimal circuit depth for the Quantum Approximate Optimization Algorithm (QAOA) in the presence of noise. We find that, while there is no significant difference in the performance of classical optimizers in a state vector simulation, the Adam and AMSGrad optimizers perform best in the presence of shot noise. Under the conditions of real noise, the SPSA optimizer, along with ADAM and AMSGrad, emerge as the top performers. The study also reveals that the quality of solutions to some 5 qubit minimum vertex cover problems increases for up to around six layers in the QAOA circuit, after which it begins to decline. This analysis shows that increasing the number of layers in the QAOA in an attempt to increase accuracy may not work well in a noisy device.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.
The Quantum Approximate Optimization Algorithm (QAOA) is a hybrid quantum-classical algorithm used to study NP-hard combinatorial optimization problems. In this work, we focused on optimization strategies for QAOA including circuit depth reduction, parameter parallelization, and hybrid classical feedback mechanisms. We will consider the application of QAOA to different types of NP-hard problems such as Max-Cut and Vehicle Routing Problem (VRP) and discuss the advantages and disadvantages of each in terms of approximation quality and cost of computation. The comparative simulation on the various qubit counts and depth layers points out the limits of scalability and the constraints of hardware on the current Noisy Intermediate-Scale Quantum (NISQ) devices. And also an improved divide-and-conquer strategy is presented in which parameter reusability and gradient-informed initialization are combined to boost convergence rates. The results of the experiment show that it is more efficient and scalable while maintaining the competitive approximation performance compared to the baseline QAOA. The experimental validation focuses on representative small-size instances, while the proposed framework provides extensions for scalable implementations. Ultimately, this work is a step towards the realization of efficient, hardware-aware, and scalable optimization strategies, thus opening up the practical deployment of QAOA on the quantum systems of the next few years.
We implement Quantum Approximate Optimization Algorithm (QAOA) on NP-Hard problem MaxCut (for 3-chain and 4-node chain graphs, and 4-node and 6node Mobius Ladder graphs) on a quantum simulator without noise, a simulator with experimentally bench-marked noise (fake back-end), and 5-qubit and 7-qubit processors. We use the following modes of operation: QAOA parameters updated through forward pass on the quantum circuit, modelled by the noiseless simulator as well as fake back-end, and the quantum circuit for final run with updated parameters implemented on the noiseless simulator, fake back-end, and real quantum processors. While QAOA yields higher approximation ratio compared to random guess for almost all graph instances, we also conclude that given the noise in existing quantum hardware, a quantum circuit with more than two stages is not suitable for experimental implementation of QAOA currently.
The Quantum Approximate Optimization Algorithm (QAOA) is a promising approach for programming a near-term gate-based hybrid quantum computer to find good approximate solutions of hard combinatorial problems. However, little is currently know about the capabilities of QAOA, or of the difficulty of the requisite parameters optimization. Here, we study the performance of QAOA on the MaxCut combinatorial optimization problem, optimizing the quantum circuits on a classical computer using automatic differentiation and stochastic gradient descent, using QuantumFlow, a quantum circuit simulator implemented with TensorFlow. We find that we can amortize the training cost by optimizing on batches of problems instances; that QAOA can exceed the performance of the classical polynomial time Goemans-Williamson algorithm with modest circuit depth, and that performance with fixed circuit depth is insensitive to problem size. Moreover, MaxCut QAOA can be efficiently implemented on a gate-based quantum computer with limited qubit connectivity, using a qubit swap network. These observations support the prospects that QAOA will be an effective method for solving interesting problems on near-term quantum computers.