Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Computing, Communications and IoT Applications (ComComAp)

Secure Transmit Beamforming in the RF Powered Untrusted Relay networks

Xiaochen Liu, Yuanyuan Gao, Nan Sha, Sheng Hua Huang

Published Oct 1, 2019• 0 citations
Publisher

Abstract

This paper investigates secure transmission in the radio-frequency (RF) powered untrusted relay networks. The relay conducts amplify-and-forward (AF) protocol and may intercept information passively. Based on the physical-layer security technique, a two-phase communication protocol is proposed for transmit security. We aim to minimize the average total transmit power by jointly designing the transmit parameters of the networks under the security quality of service (QoS). The power minimization problem is non-convex, hence an alternative optimization (AO) based algorithm is proposed. The simulation results show that the proposed transmit scheme can significantly increase the power efficiency.

DOI
10.1109/comcomap46287.2019.9018687

Related papers

Secrecy Rate Optimization for RF Powered Two-Hop Untrusted Relay Networks with Non-Linear EH Model

Xiaochen LIU, Yuanyuan Gao, Nan Sha +2 more

In this letter, we investigate the secure transmission in radio frequency (RF) powered two-hop untrusted relay networks, where the source node and untrusted relay are both wireless powered by an RF power supplier. Specifically, considering the non-linear energy-harvesting (EH) model, the two-process communication protocol is proposed. The secrecy rate is maximized by jointly designing the beamforming vector at source and beamforming matrix at relay, under the constraints of transmit power at RF power supplier and destination. The secrecy rate maximization (SRM) is non-convex, hence we propose an alternative optimization (AO) based iterative algorithm. Numerical results demonstrate that the proposed scheme can significantly increase the secrecy rate compared to the baseline schemes.

IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences•Dec 31, 2019•0 citations

Distributed beamforming designs to improve physical layer security in wireless relay networks

Mujun Qian, Chen Liu, Youhua Fu

Abstract This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.

EURASIP Journal on Advances in Signal Processing•Apr 28, 2014•7 citations

Secure Beamforming for MIMO Two-Way Communications With an Untrusted Relay

Jianhua Mo, Meixia Tao, Yuan Liu +1 more

This paper studies the secure beamforming design in a multiple-antenna three-node system where two source nodes exchange messages with the help of an untrusted relay node. The relay acts as both an essential signal forwarder and a potential eavesdropper. Both two-phase and three-phase two-way relay strategies are considered. Our goal is to jointly optimize the source and relay beamformers for maximizing the secrecy sum rate of the two-way communications. We first derive the optimal relay beamformer structures. Then, iterative algorithms are proposed to find source and relay beamformers jointly based on alternating optimization. Furthermore, we conduct asymptotic analysis on the maximum secrecy sum-rate. Our analysis shows that when all transmit powers approach infinity, the two-phase two-way relay scheme achieves the maximum secrecy sum rate if the source beamformers are designed such that the received signals at the relay align in the same direction. This reveals an important advantage of signal alignment technique in against eavesdropping. It is also shown that if the source powers approach zero, the three-phase scheme performs the best while the two-phase scheme is even worse than direct transmission. Simulation results have verified the efficiency of the proposed secure beamforming algorithms as well as the analytical findings.

arXiv:1312.3695•IEEE Transactions on Signal Processing•Feb 20, 2014•133 citations

Secure Communication for Amplify-and-Forward Relay Networks With Finite Alphabet Input

Kuo Cao, Yueming Cai, Yongpeng Wu +1 more

This paper considers secure communication for amplify-and-forward (AF) relay networks with finite alphabet input. The joint optimization of power selection and beamforming design for improving the physical layer security of AF relay networks with single and multiple eavesdroppers is investigated. For the case with one eavesdropper, we transform the problem of multi-variable beamforming design into a single-variable optimization problem through semi-definite programming and solve it with one-dimensional optimization techniques. Moreover, the corresponding source power is obtained by utilizing the relation between the mutual information and minimum mean square error. Then, an iterative two-step algorithm is proposed to maximize the achievable secrecy rate. In the presence of multiple eavesdroppers, a zero-forcing beamforming scheme, where the confidential signal is nulled out in the direction of all eavesdroppers, is proposed to enhance the physical layer security. We decouple the source power and the beamforming vector by transforming the achievable secrecy rate into a single-variable function of the source power. Then, the suboptimal source power and the corresponding beamforming vector with low-complexity are derived. Numerical examples show that the proposed schemes significantly enhance the secrecy performance of the AF relay networks.

IEEE Transactions on Information Forensics and Security•Mar 21, 2018•12 citations

Secure beamforming design of SWIPT relay network with multiple users and eavesdroppers

Lu He, Taoshen Li, Baber +4 more

Abstract This paper studies the secure beamforming design for simultaneous wireless information and power transfer (SWIPT) in a amplify-and-forward (AF) relay networks with multiple users and eavesdroppers. Each user node adopts the power splitting (PS) scheme to decode information and harvest energy simultaneously. Our objective is to minimize the total relay transmit power under the constraints of secure transmission rate and energy harvesting requirements by jointly optimizing the beamforming matrix, artificial noise covariance matrix and PS ratios. For this non-convex problem, we propose a two-stage optimization approach to convert the original problem into two sub-problems. The first subproblem uses semidefinite relaxation (SDR) technique to transform the original problem into a convex problem, and then finds the optimal solution of the second subproblem through k-dimensional exhaustive search algorithm. Furthermore, we also propose a low complexity suboptimal solution scheme based on particle swarm optimization (PSO) algorithm. Simulation results show that the proposed scheme saves transmitting power and achieves better performance than other schemes.

Journal of Physics Conference Series•Aug 1, 2020•2 citations

Robust secure transmission for wireless relay networks with direct links and bounded channel uncertainties

Nanmiao Wu, Shaodan Ma

This paper investigates the problem of joint design of cooperative beamforming and artificial noise to achieve robust secure transmission in an amplify and forward (AF) relay network in the presence of multiple eavesdroppers. Specifically, the joint design is targeting to minimize the total relay transmission power while guaranteeing the quality of service at the legitimate receiver and preventing the eavesdroppers from interception. Different from prior designs, direct links between the source and the legitimate receiver/eavesdroppers are considered and no perfect channel state information is assumed. Considering bounded channel uncertainties in all links, the worst cases of the total relay transmission power, quality of service (i.e., the received signal-to-noise ratio) and security are first identified. Then an iterative algorithm is proposed to jointly design the relay beamforming and artificial noises for robust secure transmission. It is demonstrated by computer simulations that the proposed robust secure design is effective and practical when compared with the prior designs.

IEEE/CIC International Conference on Communications in China (ICCC)•Jul 1, 2016•0 citations
This paper investigates secure transmission in the radio-frequency (RF) powered untrusted relay networks. The relay conducts amplify-and-forward (AF) protocol and may intercept information passively. Based on the physical-layer security technique, a two-phase communication protocol is proposed for transmit security. We aim to minimize the average total transmit power by jointly designing the transmit parameters of the networks under the security quality of service (QoS). The power minimization problem is non-convex, hence an alternative optimization (AO) based algorithm is proposed. The simulation results show that the proposed transmit scheme can significantly increase the power efficiency.
In this letter, we investigate the secure transmission in radio frequency (RF) powered two-hop untrusted relay networks, where the source node and untrusted relay are both wireless powered by an RF power supplier. Specifically, considering the non-linear energy-harvesting (EH) model, the two-process communication protocol is proposed. The secrecy rate is maximized by jointly designing the beamforming vector at source and beamforming matrix at relay, under the constraints of transmit power at RF power supplier and destination. The secrecy rate maximization (SRM) is non-convex, hence we propose an alternative optimization (AO) based iterative algorithm. Numerical results demonstrate that the proposed scheme can significantly increase the secrecy rate compared to the baseline schemes.
Abstract This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.
This paper studies the secure beamforming design in a multiple-antenna three-node system where two source nodes exchange messages with the help of an untrusted relay node. The relay acts as both an essential signal forwarder and a potential eavesdropper. Both two-phase and three-phase two-way relay strategies are considered. Our goal is to jointly optimize the source and relay beamformers for maximizing the secrecy sum rate of the two-way communications. We first derive the optimal relay beamformer structures. Then, iterative algorithms are proposed to find source and relay beamformers jointly based on alternating optimization. Furthermore, we conduct asymptotic analysis on the maximum secrecy sum-rate. Our analysis shows that when all transmit powers approach infinity, the two-phase two-way relay scheme achieves the maximum secrecy sum rate if the source beamformers are designed such that the received signals at the relay align in the same direction. This reveals an important advantage of signal alignment technique in against eavesdropping. It is also shown that if the source powers approach zero, the three-phase scheme performs the best while the two-phase scheme is even worse than direct transmission. Simulation results have verified the efficiency of the proposed secure beamforming algorithms as well as the analytical findings.
This paper considers secure communication for amplify-and-forward (AF) relay networks with finite alphabet input. The joint optimization of power selection and beamforming design for improving the physical layer security of AF relay networks with single and multiple eavesdroppers is investigated. For the case with one eavesdropper, we transform the problem of multi-variable beamforming design into a single-variable optimization problem through semi-definite programming and solve it with one-dimensional optimization techniques. Moreover, the corresponding source power is obtained by utilizing the relation between the mutual information and minimum mean square error. Then, an iterative two-step algorithm is proposed to maximize the achievable secrecy rate. In the presence of multiple eavesdroppers, a zero-forcing beamforming scheme, where the confidential signal is nulled out in the direction of all eavesdroppers, is proposed to enhance the physical layer security. We decouple the source power and the beamforming vector by transforming the achievable secrecy rate into a single-variable function of the source power. Then, the suboptimal source power and the corresponding beamforming vector with low-complexity are derived. Numerical examples show that the proposed schemes significantly enhance the secrecy performance of the AF relay networks.
Abstract This paper studies the secure beamforming design for simultaneous wireless information and power transfer (SWIPT) in a amplify-and-forward (AF) relay networks with multiple users and eavesdroppers. Each user node adopts the power splitting (PS) scheme to decode information and harvest energy simultaneously. Our objective is to minimize the total relay transmit power under the constraints of secure transmission rate and energy harvesting requirements by jointly optimizing the beamforming matrix, artificial noise covariance matrix and PS ratios. For this non-convex problem, we propose a two-stage optimization approach to convert the original problem into two sub-problems. The first subproblem uses semidefinite relaxation (SDR) technique to transform the original problem into a convex problem, and then finds the optimal solution of the second subproblem through k-dimensional exhaustive search algorithm. Furthermore, we also propose a low complexity suboptimal solution scheme based on particle swarm optimization (PSO) algorithm. Simulation results show that the proposed scheme saves transmitting power and achieves better performance than other schemes.
This paper investigates the problem of joint design of cooperative beamforming and artificial noise to achieve robust secure transmission in an amplify and forward (AF) relay network in the presence of multiple eavesdroppers. Specifically, the joint design is targeting to minimize the total relay transmission power while guaranteeing the quality of service at the legitimate receiver and preventing the eavesdroppers from interception. Different from prior designs, direct links between the source and the legitimate receiver/eavesdroppers are considered and no perfect channel state information is assumed. Considering bounded channel uncertainties in all links, the worst cases of the total relay transmission power, quality of service (i.e., the received signal-to-noise ratio) and security are first identified. Then an iterative algorithm is proposed to jointly design the relay beamforming and artificial noises for robust secure transmission. It is demonstrated by computer simulations that the proposed robust secure design is effective and practical when compared with the prior designs.