Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical and Quantum Sensing and Precision Metrology II

Sensing gravity by holding atoms for 20 seconds

Victoria Xu, Matt Jaffe, Cristian Daniel Panda, Sofus L. Kristensen, Logan W. Clark, Holger Müller

Published Feb 25, 2020• 2 citations
Publisher

Abstract

Atom interferometry has proven both a powerful means for probing fundamental physics, and a promising technology for high-precision inertial sensing. However, their performance has been limited by the available interrogation time of atoms falling freely in Earth's gravitational field. Trapped geometries have thus been explored as a means to improve the sensitivity of atom interferometers, but attempts to date have suffered from decoherence caused by trap inhomogeneities. We have demonstrated a trapped atom interferometer with an unprecedented interrogation time of 20 seconds,1 achieved by trapping the interferometer in the resonant mode of an optical cavity. The cavity is instrumental to this advance, as it provides spatial mode filtering for the trapping potential. Because the interferometer is held with the arms vertically separated along the gravitational axis, a phase shift accumulates due to the gravitational potential energy difference between the arms. Moreover, this phase accumulates continuously during the hold time, providing an orders-of-magnitude greater immunity to vibrations than previous atom-interferometric gravimeters at the same sensitivity.

DOI
10.1117/12.2552611

Related papers

Probing gravity by holding atoms for 20 seconds

Victoria Xu, Matt Jaffe, Cristian Daniel Panda +3 more

Atom interferometers are powerful tools for both measurements in fundamental physics and inertial sensing applications. Their performance, however, has been limited by the available interrogation time of freely falling atoms in a gravitational field. By suspending the spatially separated atomic wave packets in a lattice formed by the mode of an optical cavity, we realize an interrogation time of 20 seconds. Our approach allows gravitational potentials to be measured by holding, rather than dropping, atoms. After seconds of hold time, gravitational potential energy differences from as little as micrometers of vertical separation generate megaradians of interferometer phase. This trapped geometry suppresses the phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters.

arXiv:1907.03054•Science•Nov 8, 2019•162 citations

Probing gravity with trapped atoms: the optical lattice atom interferometer

Cristian Daniel Panda

Atom interferometers are quantum mechanical devices sensitive to gravitational and inertial forces, with applications in fundamental physics and inertial sensing in the field. Their performance is currently limited by the interrogation time available to freely falling atoms in Earth’s gravitational field, as well as noise due to mechanical and acoustic vibrations. Our experiment probes gravitational potentials by holding, rather than dropping, atoms. We realize an interrogation time of 20 seconds by suspending the spatially separated atomic wave packets in an optical lattice. This record coherence is enabled by the smooth lattice wave fronts, which are mode-filtered by an optical cavity. This trapped geometry suppresses phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. The later part of the talk describes recent progress in characterizing and reducing dephasing of the interferometer. An upgraded optical lattice interferometer experiment is currently being commissioned, with the goal of increased sensitivity to gravity.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

Probing Gravity for One Minute with an Optical-Lattice Atom Interferometer

Cristian Daniel Panda, Matthew Tao, James Egelhoff +4 more

We have realized an atom interferometer that probes gravitational potentials by holding, rather than dropping, atoms. Up to one minute of coherence times are realized by suspending the spatially separated atomic wave packets in an optical lattice that is mode-filtered by an optical cavity. This trapped configuration suppresses phase variance due to vibrations by four to five orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. Recent progress in characterizing and reducing interferometer decoherence led to major increases in coherence and precision, paving the way to measurements of dark-energy candidates and probes of the quantum nature of gravity through measuring the gravity of source masses with record precision and spatial resolution.

arXiv:2301.13315•CPT and Lorentz Symmetry•May 1, 2023•3 citations

Feasibility of a trapped atom interferometer with accelerating optical traps

Gayathrini Premawardhana, Jonathan Kunjummen, Sarthak Subhankar +1 more

To increase the measured phase of an atom interferometer and improve its sensitivity, researchers attempt to increase the enclosed space-time area using two methods: creating larger separations between the interferometer arms and having longer evolution times. However, increasing the evolution time reduces the bandwidth that can be sampled, whereas decreasing the evolution time worsens the sensitivity. In this paper, we attempt to address this by proposing a setup for high-bandwidth applications, with improved overall sensitivity. This is realized by accelerating and holding the atoms using optical dipole traps. We find that accelerations of up to ${10}^{3}\text{--}{10}^{5}$ ${\mathrm{m/s}}^{2}$ can be achieved using acousto-optic deflectors to move the traps. By comparing the sensitivity of our approach to acceleration as a baseline to traditional atom interferometry, we find a substantial improvement to the state of the art. In the limit of appropriate beam and optics stabilization, sensitivities approaching ${10}^{\ensuremath{-}14}$ (${\mathrm{m/s}}^{2}$)/$\sqrt{\mathrm{Hz}}$ may be achievable at 1 Hz, while detection at 1 kHz with a sensitivity an order of magnitude better than traditional free-fall atom interferometers is possible with today's systems.

arXiv:2308.12246•Physical Review A•May 22, 2024•12 citations

A Transportable Gravity Gradiometer Based on Atom Interferometry

Nan Yu, Robert J. Thompson, James R. Kellogg +3 more

A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.

•May 1, 2010•2 citations

Trapped atom interferometry for precision gravity surveys and fundamental physics

Matthew Jaffe

Gravity holds great potential as a sensing channel: all matter gravitates, and this effect cannot be shielded. Gravity is so weak however, that extraordinary sensitivity is required to actualize this potential. In this talk, I will discuss a novel atomic gravimeter configuration that (a) has sufficient sensitivity to be a useful gravitational sensor, (b) is small, light and robust enough to operate as a mobile payload, and (c) has excellent spatial resolution for laboratory-scale fundamental physics research.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•0 citations
Atom interferometry has proven both a powerful means for probing fundamental physics, and a promising technology for high-precision inertial sensing. However, their performance has been limited by the available interrogation time of atoms falling freely in Earth's gravitational field. Trapped geometries have thus been explored as a means to improve the sensitivity of atom interferometers, but attempts to date have suffered from decoherence caused by trap inhomogeneities. We have demonstrated a trapped atom interferometer with an unprecedented interrogation time of 20 seconds,1 achieved by trapping the interferometer in the resonant mode of an optical cavity. The cavity is instrumental to this advance, as it provides spatial mode filtering for the trapping potential. Because the interferometer is held with the arms vertically separated along the gravitational axis, a phase shift accumulates due to the gravitational potential energy difference between the arms. Moreover, this phase accumulates continuously during the hold time, providing an orders-of-magnitude greater immunity to vibrations than previous atom-interferometric gravimeters at the same sensitivity.
Atom interferometers are powerful tools for both measurements in fundamental physics and inertial sensing applications. Their performance, however, has been limited by the available interrogation time of freely falling atoms in a gravitational field. By suspending the spatially separated atomic wave packets in a lattice formed by the mode of an optical cavity, we realize an interrogation time of 20 seconds. Our approach allows gravitational potentials to be measured by holding, rather than dropping, atoms. After seconds of hold time, gravitational potential energy differences from as little as micrometers of vertical separation generate megaradians of interferometer phase. This trapped geometry suppresses the phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters.
Atom interferometers are quantum mechanical devices sensitive to gravitational and inertial forces, with applications in fundamental physics and inertial sensing in the field. Their performance is currently limited by the interrogation time available to freely falling atoms in Earth’s gravitational field, as well as noise due to mechanical and acoustic vibrations. Our experiment probes gravitational potentials by holding, rather than dropping, atoms. We realize an interrogation time of 20 seconds by suspending the spatially separated atomic wave packets in an optical lattice. This record coherence is enabled by the smooth lattice wave fronts, which are mode-filtered by an optical cavity. This trapped geometry suppresses phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. The later part of the talk describes recent progress in characterizing and reducing dephasing of the interferometer. An upgraded optical lattice interferometer experiment is currently being commissioned, with the goal of increased sensitivity to gravity.
We have realized an atom interferometer that probes gravitational potentials by holding, rather than dropping, atoms. Up to one minute of coherence times are realized by suspending the spatially separated atomic wave packets in an optical lattice that is mode-filtered by an optical cavity. This trapped configuration suppresses phase variance due to vibrations by four to five orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. Recent progress in characterizing and reducing interferometer decoherence led to major increases in coherence and precision, paving the way to measurements of dark-energy candidates and probes of the quantum nature of gravity through measuring the gravity of source masses with record precision and spatial resolution.
To increase the measured phase of an atom interferometer and improve its sensitivity, researchers attempt to increase the enclosed space-time area using two methods: creating larger separations between the interferometer arms and having longer evolution times. However, increasing the evolution time reduces the bandwidth that can be sampled, whereas decreasing the evolution time worsens the sensitivity. In this paper, we attempt to address this by proposing a setup for high-bandwidth applications, with improved overall sensitivity. This is realized by accelerating and holding the atoms using optical dipole traps. We find that accelerations of up to 103–105{10}^{3}\text{--}{10}^{5}103–105 m/s2{\mathrm{m/s}}^{2}m/s2 can be achieved using acousto-optic deflectors to move the traps. By comparing the sensitivity of our approach to acceleration as a baseline to traditional atom interferometry, we find a substantial improvement to the state of the art. In the limit of appropriate beam and optics stabilization, sensitivities approaching ${10}^{\ensuremath{-}14}$ (m/s2{\mathrm{m/s}}^{2}m/s2)/Hz\sqrt{\mathrm{Hz}}Hz​ may be achievable at 1 Hz, while detection at 1 kHz with a sensitivity an order of magnitude better than traditional free-fall atom interferometers is possible with today's systems.
A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.
Gravity holds great potential as a sensing channel: all matter gravitates, and this effect cannot be shielded. Gravity is so weak however, that extraordinary sensitivity is required to actualize this potential. In this talk, I will discuss a novel atomic gravimeter configuration that (a) has sufficient sensitivity to be a useful gravitational sensor, (b) is small, light and robust enough to operate as a mobile payload, and (c) has excellent spatial resolution for laboratory-scale fundamental physics research.