Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium for Design and Technology in Electronic Packaging (SIITME)

The Generation of Random Numbers Using the Quantum Tunnel Effect in Transistors

P.V. Vezeteu, Ioana Popescu, Iulian Năstac

Published Oct 1, 2019• 1 citation
Publisher

Abstract

This paper proposes a random number generator based on the quantum tunnel effect that takes place in transistors. The main system is divided into two basic components: the entropy source and the postprocessing block. The quantum tunnel effect is subjected to a random character, which means that electrons have a probability to pass through the potential barrier of the transistor. Theoretically, the measurable output current of the transistor should have a random variance in a predetermined interval, that results into a random sequence. Afterwards, the postprocessing block extracts the bias from the generated array. It is implemented through a hash function which employs the Toeplitz matrix, resulting into a true random sequence. This paper accounts the preliminary stages of development of an original random number generator. The focus was the physical phenomena, the tunnel effect in transistors, and the study of its probability with respect to the device parameters. In terms of postprocessing the main regard was choosing the adequate extraction method for the quantum entropy source. The novelty of the paper is represented by using the tunnel FET as an entropy source and finding a suitable postprocessing model for a higher generation rate.

DOI
10.1109/siitme47687.2019.8990743

Related papers

Multiplexing quantum tunneling diodes for random number generation

Kanin Aungskunsiri, Ratthasart Amarit, Sakdinan Jantarachote +3 more

Random numbers are indispensable resources for application in modern science and technology. Therefore, a dedicated entropy source is essential, particularly for cryptographic tasks and modern applications. In this work, we experimentally demonstrated a scheme to generate random numbers by multiplexing eight tunnel diodes onto a single circuit. As a result, the data rate of random number generation was significantly enhanced eightfold. In comparison to the original scheme that employed one diode, this multiplexing scheme produced data with higher entropy. These data were then post-processed with the Toeplitz-hashing extractor, yielding final outputs that achieved almost full entropy and passed the U.S. National Institute of Standards and Technology (NIST) Special Publication 800-90B validation. These data also passed the NIST Special Publication 800-22 statistical randomness examination and had no sign of patterns detected from an autocorrelation analysis.

arXiv:2212.12177•Review of Scientific Instruments•Jan 1, 2023•3 citations

Postprocessing for quantum random-number generators: Entropy evaluation and randomness extraction

Xiongfeng Ma, Feihu Xu, He Xu +3 more

Quantum random-number generators (QRNGs) can offer a means to generate information-theoretically provable random numbers, in principle. In practice, unfortunately, the quantum randomness is inevitably mixed with classical randomness due to classical noises. To distill this quantum randomness, one needs to quantify the randomness of the source and apply a randomness extractor. Here, we propose a generic framework for evaluating quantum randomness of real-life QRNGs by min-entropy, and apply it to two different existing quantum random-number systems in the literature. Moreover, we provide a guideline of QRNG data postprocessing for which we implement two information-theoretically provable randomness extractors: Toeplitz-hashing extractor and Trevisan's extractor.

arXiv:1207.1473•Physical Review A•Jun 21, 2013•250 citations

Entropy Sources from Tunnelling in Standard CMOS Structures

Julian Keledjian, Torsten Lehmann

Abstract Pseudo-random number generators are predominantly utilised as entropy sources in encryption and seeding processes, however, they are deterministic by nature. This paper presents the analysis and design methodology of an on-chip quantum noise source that may suitably be used as an entropy source in true random number generators. Quantum tunnelling is achieved through the strong biasing of a MOS structure to generate gate-referred shot noise. Structures are fabricated in a commercial 40 nm process and the sampled noise is tested against the NIST SP800-90B and SP800-22 test suites, showing a maximal entropy of 0.985 at a bias current of 1500 µA with a consistent pass rate across all NIST tests.

Circuits Systems and Signal Processing•Apr 18, 2024•1 citation

Algorithmic Randomness Generation via Quantum Tunneling Simulation

Jincheng Zhang

This paper proposes a novel approach to algorithmic randomness generation utilizing the principles of quantum tunneling simulation. Traditional pseudo-random number generators (PRNGs) are inherently susceptible to biases and vulnerabilities, often derived from deterministic algorithms. This research introduces a methodology that harnesses quantum phenomena, specifically the probability of tunneling through a potential well, to produce truly random sequences. The core mechanism involves modulating the tunneling probability based on a function directly related to the desired random value. This approach offers a fundamentally different paradigm for randomness generation, potentially overcoming the limitations imposed by classical PRNGs and providing a more robust and unbiased source of randomness. The simulation methodology is described in detail, along with a theoretical framework outlining the key mathematical operations involved. The potential advantages of this technique, particularly regarding its resistance to prediction and biases, are explored.

•Sep 2, 2026•0 citations

Extracting random numbers from quantum tunnelling through a single diode

Ramón Bernardo-Gavito, Ibrahim Ethem Bagci, Jonathan Roberts +9 more

Random number generation is crucial in many aspects of everyday life, as online security and privacy depend ultimately on the quality of random numbers. Many current implementations are based on pseudo-random number generators, but information security requires true random numbers for sensitive applications like key generation in banking, defence or even social media. True random number generators are systems whose outputs cannot be determined, even if their internal structure and response history are known. Sources of quantum noise are thus ideal for this application due to their intrinsic uncertainty. In this work, we propose using resonant tunnelling diodes as practical true random number generators based on a quantum mechanical effect. The output of the proposed devices can be directly used as a random stream of bits or can be further distilled using randomness extraction algorithms, depending on the application.

arXiv:1706.07348•Scientific Reports•Dec 13, 2017•37 citations

Quantum random number generators, extraction of provably random bit sequences from Markov chain trajectories

Igor M. Arbekov, S. N. Molotkov

One of the main problems in the construction of quantum random number generators Ð obtainment of a provably random output sequence from physical measurements, i.e., from an initial sequence generated by a physical random number generator Ð is investigated.The conceptual feasibility and the conditions under which randomness can be `reached,' as well as the meaning of the `provable randomness' term, are discussed.We consider the methods of extracting provably random bit sequences from stationary Markov chains of finite order, i.e., under the assumption of the finite depth of the dependence of the results of physical measurements on the prehistory, which is an adequate approximation of the real situation.The extraction of the output provably random bit sequence from the initial sequence of the results of physical measurements using V F Babkin's effective arithmetic coding method is demonstrated.It is shown that random bit sequences can be provably obtained even from primary sequences of the results of physical measurements, which are dependent on (correlated to) any finite depth (prehistory).We aim to reveal the connection of various approximations employed in the development and description of methods for obtaining random bit sequences with the basic physical limitations of Nature.The mathematical proofs are detailed to the level of practical algorithms applied in real random number generators.The necessary mathematical propositions are presented at an intuitive level for physicists, do not require prior knowledge in this area, and are comprehensible to undergraduate university students.

Physics-Uspekhi•Feb 1, 2024•3 citations
This paper proposes a random number generator based on the quantum tunnel effect that takes place in transistors. The main system is divided into two basic components: the entropy source and the postprocessing block. The quantum tunnel effect is subjected to a random character, which means that electrons have a probability to pass through the potential barrier of the transistor. Theoretically, the measurable output current of the transistor should have a random variance in a predetermined interval, that results into a random sequence. Afterwards, the postprocessing block extracts the bias from the generated array. It is implemented through a hash function which employs the Toeplitz matrix, resulting into a true random sequence. This paper accounts the preliminary stages of development of an original random number generator. The focus was the physical phenomena, the tunnel effect in transistors, and the study of its probability with respect to the device parameters. In terms of postprocessing the main regard was choosing the adequate extraction method for the quantum entropy source. The novelty of the paper is represented by using the tunnel FET as an entropy source and finding a suitable postprocessing model for a higher generation rate.
Random numbers are indispensable resources for application in modern science and technology. Therefore, a dedicated entropy source is essential, particularly for cryptographic tasks and modern applications. In this work, we experimentally demonstrated a scheme to generate random numbers by multiplexing eight tunnel diodes onto a single circuit. As a result, the data rate of random number generation was significantly enhanced eightfold. In comparison to the original scheme that employed one diode, this multiplexing scheme produced data with higher entropy. These data were then post-processed with the Toeplitz-hashing extractor, yielding final outputs that achieved almost full entropy and passed the U.S. National Institute of Standards and Technology (NIST) Special Publication 800-90B validation. These data also passed the NIST Special Publication 800-22 statistical randomness examination and had no sign of patterns detected from an autocorrelation analysis.
Quantum random-number generators (QRNGs) can offer a means to generate information-theoretically provable random numbers, in principle. In practice, unfortunately, the quantum randomness is inevitably mixed with classical randomness due to classical noises. To distill this quantum randomness, one needs to quantify the randomness of the source and apply a randomness extractor. Here, we propose a generic framework for evaluating quantum randomness of real-life QRNGs by min-entropy, and apply it to two different existing quantum random-number systems in the literature. Moreover, we provide a guideline of QRNG data postprocessing for which we implement two information-theoretically provable randomness extractors: Toeplitz-hashing extractor and Trevisan's extractor.
Abstract Pseudo-random number generators are predominantly utilised as entropy sources in encryption and seeding processes, however, they are deterministic by nature. This paper presents the analysis and design methodology of an on-chip quantum noise source that may suitably be used as an entropy source in true random number generators. Quantum tunnelling is achieved through the strong biasing of a MOS structure to generate gate-referred shot noise. Structures are fabricated in a commercial 40 nm process and the sampled noise is tested against the NIST SP800-90B and SP800-22 test suites, showing a maximal entropy of 0.985 at a bias current of 1500 µA with a consistent pass rate across all NIST tests.
This paper proposes a novel approach to algorithmic randomness generation utilizing the principles of quantum tunneling simulation. Traditional pseudo-random number generators (PRNGs) are inherently susceptible to biases and vulnerabilities, often derived from deterministic algorithms. This research introduces a methodology that harnesses quantum phenomena, specifically the probability of tunneling through a potential well, to produce truly random sequences. The core mechanism involves modulating the tunneling probability based on a function directly related to the desired random value. This approach offers a fundamentally different paradigm for randomness generation, potentially overcoming the limitations imposed by classical PRNGs and providing a more robust and unbiased source of randomness. The simulation methodology is described in detail, along with a theoretical framework outlining the key mathematical operations involved. The potential advantages of this technique, particularly regarding its resistance to prediction and biases, are explored.
Random number generation is crucial in many aspects of everyday life, as online security and privacy depend ultimately on the quality of random numbers. Many current implementations are based on pseudo-random number generators, but information security requires true random numbers for sensitive applications like key generation in banking, defence or even social media. True random number generators are systems whose outputs cannot be determined, even if their internal structure and response history are known. Sources of quantum noise are thus ideal for this application due to their intrinsic uncertainty. In this work, we propose using resonant tunnelling diodes as practical true random number generators based on a quantum mechanical effect. The output of the proposed devices can be directly used as a random stream of bits or can be further distilled using randomness extraction algorithms, depending on the application.
One of the main problems in the construction of quantum random number generators Ð obtainment of a provably random output sequence from physical measurements, i.e., from an initial sequence generated by a physical random number generator Ð is investigated.The conceptual feasibility and the conditions under which randomness can be `reached,' as well as the meaning of the `provable randomness' term, are discussed.We consider the methods of extracting provably random bit sequences from stationary Markov chains of finite order, i.e., under the assumption of the finite depth of the dependence of the results of physical measurements on the prehistory, which is an adequate approximation of the real situation.The extraction of the output provably random bit sequence from the initial sequence of the results of physical measurements using V F Babkin's effective arithmetic coding method is demonstrated.It is shown that random bit sequences can be provably obtained even from primary sequences of the results of physical measurements, which are dependent on (correlated to) any finite depth (prehistory).We aim to reveal the connection of various approximations employed in the development and description of methods for obtaining random bit sequences with the basic physical limitations of Nature.The mathematical proofs are detailed to the level of practical algorithms applied in real random number generators.The necessary mathematical propositions are presented at an intuitive level for physicists, do not require prior knowledge in this area, and are comprehensible to undergraduate university students.