Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Superconductive Electronics Conference (ISEC)

Effect of self-induced flux in parallel arrays of Josephson junctions

Denis Crété, Yves Lemaître, Bruno Marcilhac, Juan Trastoy, C. Ulysse

Published Jul 1, 2019• 4 citations
Publisher

Abstract

We have studied the self-field effect on a parallel array of 21 Josephson junctions based on an ion-damaged barrier technology [1]. The device is made of 2 chips: a superconducting chip integrating the Josephson junction array, and another chip with single layer of normal metal (gold) patterned with a grid of parallel stripes. These chips are assembled in a piggy-back configuration, and wire bonded in such a way that the bias current flowing through the array can be drained in different positions with respect to the Josephson array. As expected, we observed that the antipeak of the voltage response to an applied magnetic field was shifted by the proximity of the drained current. In addition, we observed a change in the shape of the response which we attribute to a change of the supercurrent distribution in the array. This geometry will allow proper biasing of large parallel and 2D arrays of Josephson junctions.

DOI
10.1109/isec46533.2019.8990895

Related papers

Self-induced magnetic field effects caused by edge currents in parallel array of Josephson junctions

V. K. Kaplunenko, E. Goldobin, M. Khabipov +3 more

A transmission line consisting of a parallel connection of shunted Josephson junctions is one of the base elements in the new Rapid Single Flux Quantum (RSFQ) logic. When an additional bias current is applied to the edge junction of the transmission line it generates and injects series of flux quanta on the line. This kind of pulse generators have important applications for testing RSFQ devices at high frequencies. In such experiments unwanted steps always show up in the I-V curve of the generator junction. This problem has been experimentally and numerically investigated for parallel arrays of identical junctions. Steps with extremely low differential resistance are found to be due to the self-induced magnetic field produced by the edge current. The underlying mechanism is that the non-uniform field divides the array into domains consisting of several (unit) cells each containing the same number of flux quanta. The influence of an applied homogeneous external magnetic field and a uniformly distributed bias current is also considered.

Journal of Applied Physics•Nov 1, 1993•5 citations

The effect of bias current configuration on the performance of SQUID arrays

M. A. Galí Labarias, K.‐H. Müller, E.E. Mitchell

Abstract Designing superconducting electronic devices involves a careful study of all the elements in the circuit, including the superconducting bias leads. In this work, we introduce a theoretical model for two-dimensional (2D) superconducting quantum interference device (SQUID) arrays capable of simulating the voltage-to-magnetic flux response of devices with different bias current configurations. First, we compare uniformly biased and centre biased SQUID arrays by investigating the voltage versus magnetic flux response, maximum transfer function and voltage modulation depth. Then, we calculate the time-averaged fluxoid distributions for one-dimensional (1D) and 2D centre biased arrays. Finally, we study the performance of the two bias current configurations depending on array size, screening parameter, thermal noise strength and kinetic self-inductance fraction. Our calculations reveal: (i) centre biased 1D parallel SQUID arrays present an unusual voltage response caused by the asymmetric fluxoid distribution; (ii) the optimal transfer function of centre biased arrays strongly depends on the number of junctions in parallel; (iii) the performance of centre biased arrays approaches the uniform biased ones when the number of junctions in series exceeds those in parallel; (iv) while the screening parameter and the thermal noise strength clearly affect the device performance, the kinetic to self-inductance fraction seems to play only a secondary role.

arXiv:2303.05609•Superconductor Science and Technology•Sep 17, 2023•7 citations

Statics of non uniform Josephson junction parallel arrays: model vs. experiment

Faouzi M. Boussaha, Jean-Guy Caputo, L. Loukitch +1 more

We study experimentally and numerically the zero-voltage supercurrent vs. magnetic field of non-uniform arrays of Josephson junctions parallel-connected by a superconducting stripline. The measured curves are complex, unique and in excellent agreement with numerical simulations using a specially developed model. Using this, we can optimize the arrays to have any desired interference pattern. Such new devices could find applications in magnetometry, quasiparticle mixers and detectors, flux-flow oscillators and superconducting electronics.

arXiv:cond-mat/0609757•Sep 29, 2006•3 citations

Parallel Arrays of Josephson Junctions for Submillimeter Local Oscillators

A. Pance, Michael J. Wengler

In this paper we discuss the influence of the DC biasing circuit on operation of parallel biased quasioptical Josephson junction oscillator arrays. Because of nonuniform distribution of the DC biasing current along the length of the bias lines, there is a nonuniform distribution of magnetic flux in superconducting loops connecting every two junctions of the array. These DC self-field effects determine the state of the array. We present analysis and time-domain numerical simulations of these states for four biasing configurations. We find conditions for the in-phase states with maximum power output. We compare arrays with small and large inductances and determine the low inductance limit for nearly-in-phase array operation. We show how arrays can be steered in H-plane using the externally applied DC magnetic field.

Softwaretechnik-Trends•Jan 1, 1992•1 citation

Imaging of the dynamic magnetic structure in a parallel array of shunted Josephson junctions

T. Doderer, V. K. Kaplunenko, J. Mygind +1 more

A one-dimensional (1D) parallel array of shunted Josephson junctions is one of the basic elements in the family of rapid single-flux quantum logic circuits. It was found recently that current steps always show up in the current-voltage curve of the generator junction when an additional bias current is applied to the edge junction of the array. This effect was found to be due to the self-induced magnetic field produced by the edge current. This nonuniform field divides the array into domains each spanning several unit cells and each containing the same number of flux quanta. We report on experimental results obtained by low-temperature scanning electron microscopy (LTSEM) on the 1D array. The (1--3)-\ensuremath{\mu}m spatial resolution achieved by LTSEM enables us to image these domains in scanned measurements where the junctions in the array are heated sequentially. Computer simulations confirm the mechanism of the obtained images and the number of observed domains corresponds to the step position as predicted numerically.

Physical review. B, Condensed matter•Sep 1, 1994•5 citations

Fabrication of Josephson superconductor-normal metal-superconductor series arrays using a focused ion beam

Richard Moseley, Anthony J. Bennett, W.E. Booij +2 more

A new fabrication method for superconductor-normal metal-superconductor junctions employing focused ion beam patterning of a superconductor-normal metal bilayer has been used to make series junction arrays. We investigated their current-voltage (I-V) characteristic and examined their response to microwaves at 4.2 K. Multiple integer Shapiro steps were observed in the I-V response of an array to microwaves. In addition, we found that the properties of each junction in a double-junction series array did not change in the junction spacing range studied (0.2-8 µm). Modelling the I-V characteristic of large arrays showed the junction variation of the critical current was 20%.

Superconductor Science and Technology•Nov 1, 1999•2 citations
We have studied the self-field effect on a parallel array of 21 Josephson junctions based on an ion-damaged barrier technology [1]. The device is made of 2 chips: a superconducting chip integrating the Josephson junction array, and another chip with single layer of normal metal (gold) patterned with a grid of parallel stripes. These chips are assembled in a piggy-back configuration, and wire bonded in such a way that the bias current flowing through the array can be drained in different positions with respect to the Josephson array. As expected, we observed that the antipeak of the voltage response to an applied magnetic field was shifted by the proximity of the drained current. In addition, we observed a change in the shape of the response which we attribute to a change of the supercurrent distribution in the array. This geometry will allow proper biasing of large parallel and 2D arrays of Josephson junctions.
A transmission line consisting of a parallel connection of shunted Josephson junctions is one of the base elements in the new Rapid Single Flux Quantum (RSFQ) logic. When an additional bias current is applied to the edge junction of the transmission line it generates and injects series of flux quanta on the line. This kind of pulse generators have important applications for testing RSFQ devices at high frequencies. In such experiments unwanted steps always show up in the I-V curve of the generator junction. This problem has been experimentally and numerically investigated for parallel arrays of identical junctions. Steps with extremely low differential resistance are found to be due to the self-induced magnetic field produced by the edge current. The underlying mechanism is that the non-uniform field divides the array into domains consisting of several (unit) cells each containing the same number of flux quanta. The influence of an applied homogeneous external magnetic field and a uniformly distributed bias current is also considered.
Abstract Designing superconducting electronic devices involves a careful study of all the elements in the circuit, including the superconducting bias leads. In this work, we introduce a theoretical model for two-dimensional (2D) superconducting quantum interference device (SQUID) arrays capable of simulating the voltage-to-magnetic flux response of devices with different bias current configurations. First, we compare uniformly biased and centre biased SQUID arrays by investigating the voltage versus magnetic flux response, maximum transfer function and voltage modulation depth. Then, we calculate the time-averaged fluxoid distributions for one-dimensional (1D) and 2D centre biased arrays. Finally, we study the performance of the two bias current configurations depending on array size, screening parameter, thermal noise strength and kinetic self-inductance fraction. Our calculations reveal: (i) centre biased 1D parallel SQUID arrays present an unusual voltage response caused by the asymmetric fluxoid distribution; (ii) the optimal transfer function of centre biased arrays strongly depends on the number of junctions in parallel; (iii) the performance of centre biased arrays approaches the uniform biased ones when the number of junctions in series exceeds those in parallel; (iv) while the screening parameter and the thermal noise strength clearly affect the device performance, the kinetic to self-inductance fraction seems to play only a secondary role.
We study experimentally and numerically the zero-voltage supercurrent vs. magnetic field of non-uniform arrays of Josephson junctions parallel-connected by a superconducting stripline. The measured curves are complex, unique and in excellent agreement with numerical simulations using a specially developed model. Using this, we can optimize the arrays to have any desired interference pattern. Such new devices could find applications in magnetometry, quasiparticle mixers and detectors, flux-flow oscillators and superconducting electronics.
In this paper we discuss the influence of the DC biasing circuit on operation of parallel biased quasioptical Josephson junction oscillator arrays. Because of nonuniform distribution of the DC biasing current along the length of the bias lines, there is a nonuniform distribution of magnetic flux in superconducting loops connecting every two junctions of the array. These DC self-field effects determine the state of the array. We present analysis and time-domain numerical simulations of these states for four biasing configurations. We find conditions for the in-phase states with maximum power output. We compare arrays with small and large inductances and determine the low inductance limit for nearly-in-phase array operation. We show how arrays can be steered in H-plane using the externally applied DC magnetic field.
A one-dimensional (1D) parallel array of shunted Josephson junctions is one of the basic elements in the family of rapid single-flux quantum logic circuits. It was found recently that current steps always show up in the current-voltage curve of the generator junction when an additional bias current is applied to the edge junction of the array. This effect was found to be due to the self-induced magnetic field produced by the edge current. This nonuniform field divides the array into domains each spanning several unit cells and each containing the same number of flux quanta. We report on experimental results obtained by low-temperature scanning electron microscopy (LTSEM) on the 1D array. The (1--3)-\ensuremath{\mu}m spatial resolution achieved by LTSEM enables us to image these domains in scanned measurements where the junctions in the array are heated sequentially. Computer simulations confirm the mechanism of the obtained images and the number of observed domains corresponds to the step position as predicted numerically.
A new fabrication method for superconductor-normal metal-superconductor junctions employing focused ion beam patterning of a superconductor-normal metal bilayer has been used to make series junction arrays. We investigated their current-voltage (I-V) characteristic and examined their response to microwaves at 4.2 K. Multiple integer Shapiro steps were observed in the I-V response of an array to microwaves. In addition, we found that the properties of each junction in a double-junction series array did not change in the junction spacing range studied (0.2-8 µm). Modelling the I-V characteristic of large arrays showed the junction variation of the critical current was 20%.