Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Stopping and Storing Light in Semiconductor Quantum Wells and Optical Microresonators

Jacob B. Khurgin, R.S. Tucker

Published Oct 8, 2018• 0 citations
Publisher

Abstract

There is a wide variety of proposals for implementations of slow-light effects, and many of them are described in the various chapters of this book. The physical implementations vary from system to system, and so do the mathematical formalisms used to describe the specific physical systems. However, it is also possible that one has two completely different physical slow-light systems, yet the mathematical framework describing the slowing and stopping of light is very similar. In this chapter, we present an example falling into this category. The two physically different slow-light systems are (1) semiconductor multiple quantum wells (QWs) (more specifically: Bragg-spaced multiple QWs, or BSQWs [1-16]) and (2) optical resonators (more specifically: side-coupled integrated spaced sequence of resonators with two waveguide channels, or two-channel SCISSORs [17,18]). In Figure 13.1, BSQWs are schematically shown as a sequence of thin semiconductor QWs, spaced by a distance a with a dielectric of refractive index nb between the wells. SCISSORs are sequences of ring-shaped dielectric optical microresonators coupled to two waveguides (Figure 13.2). Clearly, these are very different physical systems, and so onemay wonder in which sense slow-light concepts (i.e., the concepts for delaying, stopping, storing, and releasing light) can be similar or almost identical in these systems. The answer to this question lies in the fact that both systems can be viewed as physical realizations of one-dimensional resonant photonic bandgap structures (RPBGs). RPBGs differ from conventional (nonresonant) photonic bandgap structures in that each unit cell in the photonic lattice exhibits an optical resonance with a resonance frequency that is identical or at least close to the Bragg frequency characterizing the optical lattice. In QWs, the optical resonance is taken to be the heavy-hole exciton resonance, while in SCISSORs we take one of the optical resonances of the microrings.

DOI
10.1201/9781315219059-22

Related papers

Stopping, Storing andReleasing LightinQuantum WellBraggStructures

Zhi-Xiang Yang, N. H. Kwong, R. Binderl

Stopping, storing andreleasing oflight inresonant photonic bandgap structures madefrom Bragg-spaced quantum wells isstudied. Theexpected performance ofalmost ideal infinite systemsiscontrasted withthatofexisting structures. (©) 2005Optical Society ofAmerica OCIS codes:190.5970 Semiconductor nonlinear optics including MQW, 320.7130 Ultrafast processes incondensed matter, including semiconductors Photonic bandgapstructures suchasphotonic crystals andlayered periodic optical structures-have become important tools forthedeliberate control andmanipulation oflight. Oneclass ofphotonic bandgap structures contains periodically spaced materials withoptical resonances. Oftenreferred toasresonant photonic bandgap structures (RPBG's), this class includes amultiple semiconductor quantum well system whereone Braggfrequency ischosen tobenearthefrequency oftheexciton resonance ineachquantum well(see, e.g., [1, 2,3]). Animportant potential application ofRPBG'sistheslowing andstopping oflight. Here, wedescribe a scheme forthestopping, storing andreleasing oflight thatisbased onthemanipulation ofthephotonic bandstructure ofquantum well Bragg structures. Inaddition toadiscussion ofthebasic idea intermsofideal infinitely (oratleast very) longstructures, wepresent numerical results aimedatevaluating thefeasibility ofcontrolled delay andpossible stopping oflight pulses inrealistic quantum wellBraggstructures. Weshow thattheusefulness ofquantum wellBragg structures foroptical delay lines depends critically onthenumber ofquantumwells andthedephasing/loss mechanism ineachunitcell oftheRPBG,andwealsooutline optimization strategies intermsofspectral light characteristics aswell asquasi anti-reflection coating ofthe

•Jan 1, 2005•0 citations

Stopping, storing, and releasing light in quantum-well Bragg structures

Zhenshan S. Yang, N. H. Kwong, Rolf H. Binder +1 more

We present a theoretical analysis of light propagation in one-dimensional resonant photonic bandgap structures (RPBGs). The analysis is aimed at evaluating the feasibility of controlled stopping, storing, and releasing of light pulses by parametric manipulation of the RPBG's bandstructure. First we lay the conceptual foundation of light-pulse delay by means of band structure control in infinite RPBGs, and then we contrast the idealized concepts with numerical results for realistic, finite-sized RPBGs. For a physical model for RPBGs, we use semiconductor quantum-well Bragg structures, but the general analysis is valid for a wider class of RPBG. We show that the usefulness of RPBGs for optical delay lines depends critically on the number of quantum wells and the dephasing and loss mechanisms in each unit cell of the RPBG, and we also outline optimization strategies in terms of spectral light characteristics as well as quasi-antireflection coating of the RPBGs.

Journal of the Optical Society of America B•Oct 1, 2005•60 citations

Stopping, storing and releasing light in quantum well Bragg structures

Zhenshan S. Yang, N. H. Kwong, Rolf H. Binder +1 more

Stopping, storing and releasing of light in resonant photonic bandgap structures made from Bragg-spaced quantum wells is studied. The expected performance of almost ideal infinite systems is contrasted with that of existing structures.

Quantum Electronics and Laser Science Conference•Dec 10, 2005•2 citations

Slowing and switching of light in semiconductor quantum wells

Murat Yıldırım

After light became a part of the telecommunication system, the manipulation of light, especially the control of the speed of light, became a focus of research. By using the different approaches of the interaction between light and matter, there have been many successful attempts to slow down the speed of light, even to several meters per second. In the first part of my thesis, I studied pulse propagation in absorptive media (GaAs/AlGaAs multiple quantum well structures-MQWs) to gain insight into the linear interaction between matter and light. Systematic and fundamental measurements of pulse propagation in GaAs/AlGaAs multiple quantum well structures will be presented. These measurements are simulated by treating MQWs as a slab. These measurements and simulations will be compared while using a newly introduced general formalism.\nIn the second part of my thesis, I will present another aspect of manipulating light: all-optical switching. Eric Gansen demonstrated all-optical switching in GaAs/AlGaAs MQWs at cryogenic temperatures. I will demonstrate that the same design of all-optical switch, which is based on polarized virtual carriers, can work without any serious loss of performance at near-room temperatures.\nAnother material used in all-optical switches is Bragg-spaced-quantum-well structures (BSQWs) which are grown by molecular beam epitaxy. The growth of BSQW is challenging because of the associated unusually long growth times. In the last part of this dissertation, I will discuss the challenges involved in MBE growth of 210 period long GaAs/InGaAs BSQWs. By presenting basic characterization measurements of the successful and unsuccessful attempts of BSQW growths, I will demonstrate the challenges of BSQW growth and how they can be addressed.

•Dec 1, 2010•0 citations

Ultraslow and stored light in metamaterials: new developments and verifications

Kosmas L. Tsakmakidis, Ortwin G. Hess

Recently there has been a considerable interest in metamaterial waveguide structures capable of dramatically slowing down or, even, completely stopping light. Here, we shall explain in some detail the working principle behind the deceleration and/or stopping of light in metamaterial structures, and review the various, metamaterial-enabled, methods that have been proposed thus far towards achieving such a goal. Further, we will concisely describe how one can construct zero-loss metamaterials over a continuous and broad (but not infinite) range of frequencies, which is an essential prerequisite for any slow-light system. Moreover, it will be explained that inside such waveguide structures light can in principle be stopped (zero group velocity, vg = 0) even in the presence of losses. By nature, metamaterialenabled schemes for stopping/storing light invoke solid-state materials and, as such, are not subject to low-temperature or atomic coherence limitations. Furthermore, these methods simultaneously allow for broad bandwidth operation, since they do not rely on group index resonances; large delay-bandwidth products, since a wave packet can, in principle, be completely stopped and buffered indefinitely; and (for the case, in particular, where a negative-index metamaterial is used) high, almost 100%, in/out-coupling efficiencies. Thus, we conclude that these methods for trapping photons, which can be realised using existing technology, could open the way to a multitude of hybrid optoelectronic devices to be used in 'quantum information' processing, communication networks and signal processors and may conceivably herald a new realm of combined metamaterials and slow light research.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 22, 2009•0 citations

Fast, Slow, Stopping and Storing Light Simultaneously using a PANDA Ring On-Chip

Napatasakon Sarapat, W. Khunnam, Surasak Chiangga +4 more

Past and slow light behaviors are the interesting aspects of light which can be useful for many fundamental and applied researches. Pornsuwancharoen and Yupapin et al. [1] have proposed the use of a simple device called “microring resonator” to perform such behaviors. In this research work, the four different behaviors of light i.e., fast, slow, stopping and storing of light where investigated using a ring resonator. Nowadays, stopping or cooling light beam has become the promising technique for atom/molecule trapping investigations (using static or dynamic tweezers), especially, after the announcement of Nobel Prize 2012 in Physics on the whispering gallery modes [2, 3]. There are two more kinds of devices that can be used to trap light beams, the use of microcavity arrays performed by Yanik and Fan [4], and nonlinear microring resonator by Yupapin and Pornsuwancharoen [5] for stopping light (laser beam). Nanyang Technological University scientists have also done experiment to slowing the light in microresonators using a microring system recently [6]. This concept is a concrete backbone for many applications.

Asia Pacific Physics Newsletter•Jan 1, 2013•3 citations
There is a wide variety of proposals for implementations of slow-light effects, and many of them are described in the various chapters of this book. The physical implementations vary from system to system, and so do the mathematical formalisms used to describe the specific physical systems. However, it is also possible that one has two completely different physical slow-light systems, yet the mathematical framework describing the slowing and stopping of light is very similar. In this chapter, we present an example falling into this category. The two physically different slow-light systems are (1) semiconductor multiple quantum wells (QWs) (more specifically: Bragg-spaced multiple QWs, or BSQWs [1-16]) and (2) optical resonators (more specifically: side-coupled integrated spaced sequence of resonators with two waveguide channels, or two-channel SCISSORs [17,18]). In Figure 13.1, BSQWs are schematically shown as a sequence of thin semiconductor QWs, spaced by a distance a with a dielectric of refractive index nb between the wells. SCISSORs are sequences of ring-shaped dielectric optical microresonators coupled to two waveguides (Figure 13.2). Clearly, these are very different physical systems, and so onemay wonder in which sense slow-light concepts (i.e., the concepts for delaying, stopping, storing, and releasing light) can be similar or almost identical in these systems. The answer to this question lies in the fact that both systems can be viewed as physical realizations of one-dimensional resonant photonic bandgap structures (RPBGs). RPBGs differ from conventional (nonresonant) photonic bandgap structures in that each unit cell in the photonic lattice exhibits an optical resonance with a resonance frequency that is identical or at least close to the Bragg frequency characterizing the optical lattice. In QWs, the optical resonance is taken to be the heavy-hole exciton resonance, while in SCISSORs we take one of the optical resonances of the microrings.
Stopping, storing andreleasing oflight inresonant photonic bandgap structures madefrom Bragg-spaced quantum wells isstudied. Theexpected performance ofalmost ideal infinite systemsiscontrasted withthatofexisting structures. (©) 2005Optical Society ofAmerica OCIS codes:190.5970 Semiconductor nonlinear optics including MQW, 320.7130 Ultrafast processes incondensed matter, including semiconductors Photonic bandgapstructures suchasphotonic crystals andlayered periodic optical structures-have become important tools forthedeliberate control andmanipulation oflight. Oneclass ofphotonic bandgap structures contains periodically spaced materials withoptical resonances. Oftenreferred toasresonant photonic bandgap structures (RPBG's), this class includes amultiple semiconductor quantum well system whereone Braggfrequency ischosen tobenearthefrequency oftheexciton resonance ineachquantum well(see, e.g., [1, 2,3]). Animportant potential application ofRPBG'sistheslowing andstopping oflight. Here, wedescribe a scheme forthestopping, storing andreleasing oflight thatisbased onthemanipulation ofthephotonic bandstructure ofquantum well Bragg structures. Inaddition toadiscussion ofthebasic idea intermsofideal infinitely (oratleast very) longstructures, wepresent numerical results aimedatevaluating thefeasibility ofcontrolled delay andpossible stopping oflight pulses inrealistic quantum wellBraggstructures. Weshow thattheusefulness ofquantum wellBragg structures foroptical delay lines depends critically onthenumber ofquantumwells andthedephasing/loss mechanism ineachunitcell oftheRPBG,andwealsooutline optimization strategies intermsofspectral light characteristics aswell asquasi anti-reflection coating ofthe
We present a theoretical analysis of light propagation in one-dimensional resonant photonic bandgap structures (RPBGs). The analysis is aimed at evaluating the feasibility of controlled stopping, storing, and releasing of light pulses by parametric manipulation of the RPBG's bandstructure. First we lay the conceptual foundation of light-pulse delay by means of band structure control in infinite RPBGs, and then we contrast the idealized concepts with numerical results for realistic, finite-sized RPBGs. For a physical model for RPBGs, we use semiconductor quantum-well Bragg structures, but the general analysis is valid for a wider class of RPBG. We show that the usefulness of RPBGs for optical delay lines depends critically on the number of quantum wells and the dephasing and loss mechanisms in each unit cell of the RPBG, and we also outline optimization strategies in terms of spectral light characteristics as well as quasi-antireflection coating of the RPBGs.
After light became a part of the telecommunication system, the manipulation of light, especially the control of the speed of light, became a focus of research. By using the different approaches of the interaction between light and matter, there have been many successful attempts to slow down the speed of light, even to several meters per second. In the first part of my thesis, I studied pulse propagation in absorptive media (GaAs/AlGaAs multiple quantum well structures-MQWs) to gain insight into the linear interaction between matter and light. Systematic and fundamental measurements of pulse propagation in GaAs/AlGaAs multiple quantum well structures will be presented. These measurements are simulated by treating MQWs as a slab. These measurements and simulations will be compared while using a newly introduced general formalism.\nIn the second part of my thesis, I will present another aspect of manipulating light: all-optical switching. Eric Gansen demonstrated all-optical switching in GaAs/AlGaAs MQWs at cryogenic temperatures. I will demonstrate that the same design of all-optical switch, which is based on polarized virtual carriers, can work without any serious loss of performance at near-room temperatures.\nAnother material used in all-optical switches is Bragg-spaced-quantum-well structures (BSQWs) which are grown by molecular beam epitaxy. The growth of BSQW is challenging because of the associated unusually long growth times. In the last part of this dissertation, I will discuss the challenges involved in MBE growth of 210 period long GaAs/InGaAs BSQWs. By presenting basic characterization measurements of the successful and unsuccessful attempts of BSQW growths, I will demonstrate the challenges of BSQW growth and how they can be addressed.
Recently there has been a considerable interest in metamaterial waveguide structures capable of dramatically slowing down or, even, completely stopping light. Here, we shall explain in some detail the working principle behind the deceleration and/or stopping of light in metamaterial structures, and review the various, metamaterial-enabled, methods that have been proposed thus far towards achieving such a goal. Further, we will concisely describe how one can construct zero-loss metamaterials over a continuous and broad (but not infinite) range of frequencies, which is an essential prerequisite for any slow-light system. Moreover, it will be explained that inside such waveguide structures light can in principle be stopped (zero group velocity, vg = 0) even in the presence of losses. By nature, metamaterialenabled schemes for stopping/storing light invoke solid-state materials and, as such, are not subject to low-temperature or atomic coherence limitations. Furthermore, these methods simultaneously allow for broad bandwidth operation, since they do not rely on group index resonances; large delay-bandwidth products, since a wave packet can, in principle, be completely stopped and buffered indefinitely; and (for the case, in particular, where a negative-index metamaterial is used) high, almost 100%, in/out-coupling efficiencies. Thus, we conclude that these methods for trapping photons, which can be realised using existing technology, could open the way to a multitude of hybrid optoelectronic devices to be used in 'quantum information' processing, communication networks and signal processors and may conceivably herald a new realm of combined metamaterials and slow light research.
Past and slow light behaviors are the interesting aspects of light which can be useful for many fundamental and applied researches. Pornsuwancharoen and Yupapin et al. [1] have proposed the use of a simple device called “microring resonator” to perform such behaviors. In this research work, the four different behaviors of light i.e., fast, slow, stopping and storing of light where investigated using a ring resonator. Nowadays, stopping or cooling light beam has become the promising technique for atom/molecule trapping investigations (using static or dynamic tweezers), especially, after the announcement of Nobel Prize 2012 in Physics on the whispering gallery modes [2, 3]. There are two more kinds of devices that can be used to trap light beams, the use of microcavity arrays performed by Yanik and Fan [4], and nonlinear microring resonator by Yupapin and Pornsuwancharoen [5] for stopping light (laser beam). Nanyang Technological University scientists have also done experiment to slowing the light in microresonators using a microring system recently [6]. This concept is a concrete backbone for many applications.