Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Imaging with Electron Multiplying Charge Coupled Devices (EMCCDs) in photon-counting regime : a proven tool for measurement of quantum features of light

F. Devaux

Published Sep 20, 2019• 0 citations
OpenAlex

Abstract

In the field of quantum optics, imaging started with single-point detectors scanning image planes to reconstruct quantumspatial features of light. At the early 2000's the emergence of commercially available Electron Multiplying Charge-CoupledDevices (EMCCD) detectors arrays, that are sensitive to single photons, have tremendously enlarged the perspective ofquantum imaging. From the first use of EMCCD for quantum imaging up to now, this device has become a proven andessential tool for future applications of quantum imaging to massive parallel processing of quantum information. Based onhis experience and activities, regarding the use of EMCCD cameras in quantum imaging, the author will presentthe method and advantages of using EMCCD cameras in single-photon counting mode.

Related papers

Examining the effectiveness of increasing EMCCD EM gain beyond standard manufacturer limits in determining photon pair correlations

Kieran A. Roberts, Thomas Gregory, Miles J. Padgett

Electron multiplying charge coupled device (EMCCD) cameras are widely used for single-photon detection in various quantum optics applications. For example, these EMCCD cameras have been extensively used to measure the position and momentum correlations between photon pairs produced by parametric down-conversion in the image and far-field planes of the down-conversion crystal, respectively. The camera's operating parameters are typically set to balance a high quantum efficiency while simultaneously maintaining a low number of erroneous photon detections, the latter being mainly attributable to clock-induced charge (CIC) events in the readout register. The visibility of the measured correlations is an indication of the quantum efficiency of detecting the photon pairs versus the prevalence of the unwanted CIC. In this work, we show that this correlation visibility can be enhanced by operating the EMCCD camera with the electron multiplying (EM) gain set well in excess of its standard operating conditions. This enhancement will be of interest to those using EMCCD detectors in quantum imaging, sensing and processing applications.

Optics Express•Jul 22, 2025•0 citations

Quantum imaging and spatial entanglement characterization with an EMCCD camera

Matthew C. Reichert, Hugo Defienne, Xiaohang Sun +1 more

We utilize a single-photon sensitive electron multiplying CCD camera as a massively parallel coincidence counting apparatus to study spatial entanglement of photon pairs. This allows rapid measurement of transverse spatial entanglement in a fraction of the time required with traditional point-scanning techniques. We apply this technique to quantum experiments on entangled photon pairs: characterization of the evolution of entanglement upon propagation, and measurement of one- and two-photon portions of the state transmitted through non-unitary (lossy) objects, and quantum phase imaging.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 8, 2017•0 citations

Imaging high-dimensional spatial entanglement with a camera

M. Edgar, D. S. Tasca, Frauke Izdebski +6 more

The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum across a multi-pixel field of view. This capability allows us to observe entanglement of around 2,500 spatial states and demonstrate Einstein–Podolsky–Rosen type correlations by more than two orders of magnitude. More generally, our work shows that cameras can lead to important new capabilities in quantum optics and quantum information science. Measuring the entanglement between down-converted photons is central to many quantum optical experiments, and is normally performed by scanning detectors stepwise across a plane. Edgaret al. use a CCD camera to measure the entire entangled light field, finding strong correlations in position and momentum.

arXiv:1204.1293•Nature Communications•Aug 7, 2012•278 citations

General Model of Photon-Pair Detection with an Image Sensor

Hugo Defienne, Matthew C. Reichert, Jason W. Fleischer

We develop an analytic model that relates intensity correlation measurements performed by an image sensor to the properties of photon pairs illuminating it. Experiments using an effective single-photon counting camera, a linear electron-multiplying charge-coupled device camera, and a standard CCD camera confirm the model. The results open the field of quantum optical sensing using conventional detectors.

arXiv:1801.09019•Physical Review Letters•May 17, 2018•85 citations

Acquisition of multiple photon pairs with an EMCCD camera

Eliot Bolduc, Daniele Faccio, Jonathan Leach

The detection and characterization of quantum states of light plays an important role in quantum science. Traditional methods use single-photon detectors, but these are generally limited to point measurements; consequently, multi-pixel devices are now being utilized in quantum measurements, especially in the field of quantum imaging. Here, we demonstrate the capability of an EMCCD camera to record multiple coincidence events originating from parametric downconversion where the mean photon number per pixel is much greater than unity. The multi-pixel nature of the camera enables us to record correlations ranging from to 10 000 coincidences per frame. This approach to quantum measurements provide mechanisms for recording quantum signatures for bright correlated photon sources.

Journal of Optics•Apr 18, 2017•20 citations

Full field measurement of spatial correlated photon pairs with an EMCCD camera

M. Edgar, D. S. Tasca, Frauke Izdebski +5 more

The spatial correlations between the photon pairs produced by spontaneous parametric down conversion (SPDC) have been investigated in a number of different configurations over the last two decades (1). The high dimensionality of the transverse spatial degrees of freedom (DOF) of the photon pairs can be explored either by projections onto a discrete (infinite) basis, such as the LG modes, or by using a continuous basis defined by the transverse position or momentum of the photons. For instance, it has been shown that their transverse position and momentum display EPR-type correlations (2). Despite the continuous and unbounded nature of both these bases, the most common measurements to date have relied upon the scanning of a single avalanche photodiode or a very small number of individual detectors. This sequential scanning or small number of detectors negates any information capacity advantage in the use of spatial states. Recent years have seen a rapid advance in imaging technologies, particularly for low light levels. Of these technologies the highest quantum efficiency is achieved using electron multiplying CCDs (EMCCD). Developments in low noise EMCCD cameras suggest they are capable of greater than 80% quantum efficiencies and if operated in an ultra-low light environment whilst being maintained at low temperatures, can provide single photon sensitivity (3). EMCCDs have been used in measurements of sub-shot-noise correlations of intensity fluctuations (4, 5) as well as in intensity correlations measurements (6) in the far field of the photon pairs from SPDC. Here we report the observation of spatial correlations from SPDC using an EMCCD camera in both the image and far-field planes of the down conversion crystal. We pump a BBO crystal at 355nm with a few milli-Watts of optical power and use a simple lens system to relay the down-converted light to an EMCCD array which can be positioned in either the image plane or the far-field of the crystal. Our photon flux is around 1/100 per pixel, which approximately doubles the signal obtained when the light is blocked. We typically record 100,000 individual frames and then sum the auto-correlation of the individual frames. We observed intensity correlation and anti-correlation in the image and far-field planes, respectively. In both cases we make the correlations more visible by subtracting a background which is obtained as the average correlation obtained between successive frames. Using this approach we are able to visualize the strength of the correlations in both position and momentum, showing a variance product nearly one order of magnitude below the classical limit in both x and y directions.

•Jan 1, 2012•0 citations
In the field of quantum optics, imaging started with single-point detectors scanning image planes to reconstruct quantumspatial features of light. At the early 2000's the emergence of commercially available Electron Multiplying Charge-CoupledDevices (EMCCD) detectors arrays, that are sensitive to single photons, have tremendously enlarged the perspective ofquantum imaging. From the first use of EMCCD for quantum imaging up to now, this device has become a proven andessential tool for future applications of quantum imaging to massive parallel processing of quantum information. Based onhis experience and activities, regarding the use of EMCCD cameras in quantum imaging, the author will presentthe method and advantages of using EMCCD cameras in single-photon counting mode.
Electron multiplying charge coupled device (EMCCD) cameras are widely used for single-photon detection in various quantum optics applications. For example, these EMCCD cameras have been extensively used to measure the position and momentum correlations between photon pairs produced by parametric down-conversion in the image and far-field planes of the down-conversion crystal, respectively. The camera's operating parameters are typically set to balance a high quantum efficiency while simultaneously maintaining a low number of erroneous photon detections, the latter being mainly attributable to clock-induced charge (CIC) events in the readout register. The visibility of the measured correlations is an indication of the quantum efficiency of detecting the photon pairs versus the prevalence of the unwanted CIC. In this work, we show that this correlation visibility can be enhanced by operating the EMCCD camera with the electron multiplying (EM) gain set well in excess of its standard operating conditions. This enhancement will be of interest to those using EMCCD detectors in quantum imaging, sensing and processing applications.
We utilize a single-photon sensitive electron multiplying CCD camera as a massively parallel coincidence counting apparatus to study spatial entanglement of photon pairs. This allows rapid measurement of transverse spatial entanglement in a fraction of the time required with traditional point-scanning techniques. We apply this technique to quantum experiments on entangled photon pairs: characterization of the evolution of entanglement upon propagation, and measurement of one- and two-photon portions of the state transmitted through non-unitary (lossy) objects, and quantum phase imaging.
The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum across a multi-pixel field of view. This capability allows us to observe entanglement of around 2,500 spatial states and demonstrate Einstein–Podolsky–Rosen type correlations by more than two orders of magnitude. More generally, our work shows that cameras can lead to important new capabilities in quantum optics and quantum information science. Measuring the entanglement between down-converted photons is central to many quantum optical experiments, and is normally performed by scanning detectors stepwise across a plane. Edgaret al. use a CCD camera to measure the entire entangled light field, finding strong correlations in position and momentum.
The detection and characterization of quantum states of light plays an important role in quantum science. Traditional methods use single-photon detectors, but these are generally limited to point measurements; consequently, multi-pixel devices are now being utilized in quantum measurements, especially in the field of quantum imaging. Here, we demonstrate the capability of an EMCCD camera to record multiple coincidence events originating from parametric downconversion where the mean photon number per pixel is much greater than unity. The multi-pixel nature of the camera enables us to record correlations ranging from to 10 000 coincidences per frame. This approach to quantum measurements provide mechanisms for recording quantum signatures for bright correlated photon sources.
The spatial correlations between the photon pairs produced by spontaneous parametric down conversion (SPDC) have been investigated in a number of different configurations over the last two decades (1). The high dimensionality of the transverse spatial degrees of freedom (DOF) of the photon pairs can be explored either by projections onto a discrete (infinite) basis, such as the LG modes, or by using a continuous basis defined by the transverse position or momentum of the photons. For instance, it has been shown that their transverse position and momentum display EPR-type correlations (2). Despite the continuous and unbounded nature of both these bases, the most common measurements to date have relied upon the scanning of a single avalanche photodiode or a very small number of individual detectors. This sequential scanning or small number of detectors negates any information capacity advantage in the use of spatial states. Recent years have seen a rapid advance in imaging technologies, particularly for low light levels. Of these technologies the highest quantum efficiency is achieved using electron multiplying CCDs (EMCCD). Developments in low noise EMCCD cameras suggest they are capable of greater than 80% quantum efficiencies and if operated in an ultra-low light environment whilst being maintained at low temperatures, can provide single photon sensitivity (3). EMCCDs have been used in measurements of sub-shot-noise correlations of intensity fluctuations (4, 5) as well as in intensity correlations measurements (6) in the far field of the photon pairs from SPDC. Here we report the observation of spatial correlations from SPDC using an EMCCD camera in both the image and far-field planes of the down conversion crystal. We pump a BBO crystal at 355nm with a few milli-Watts of optical power and use a simple lens system to relay the down-converted light to an EMCCD array which can be positioned in either the image plane or the far-field of the crystal. Our photon flux is around 1/100 per pixel, which approximately doubles the signal obtained when the light is blocked. We typically record 100,000 individual frames and then sum the auto-correlation of the individual frames. We observed intensity correlation and anti-correlation in the image and far-field planes, respectively. In both cases we make the correlations more visible by subtracting a background which is obtained as the average correlation obtained between successive frames. Using this approach we are able to visualize the strength of the correlations in both position and momentum, showing a variance product nearly one order of magnitude below the classical limit in both x and y directions.