Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Information Forensics and Security

A Two-Dimensional Vectorized Secure Transmission Scheme for Wireless Communications

Renyong Wu, Chao Yuan, Ning Zhang, Kim‐Kwang Raymond Choo

Published Nov 20, 2019• 4 citations
Publisher

Abstract

Wireless communication security can be enhanced by leveraging the characteristics of the physical (PHY) layer, where discriminatory scrambling can be employed at the symbol level to either improve the signal quality of the legitimate receiver or degrade that of the eavesdroppers. However, in the presence of multiple passive eavesdroppers with more antennas than the transmitter, the transmitted signals can still be reliably separated from random disturbances. To mitigate this challenge, we propose a two-dimensional vectorized secure transmission scheme. Unlike existing transmission schemes (where the same data symbol is sent over each antenna with a predesigned complex weight at a time), in the proposed scheme, a sequence of data symbols in a predefined order (named symbol vector) is first pre-superposed through pre-coding with a random complex matrix prior to been sent as a vector in parallel over each transmitting antenna at a time. As a result, physical randomness of the legitimate channel is introduced into the received signals at passive eavesdroppers in the pre-coding procedure. Moreover, to ensure that transmitted data symbols can be recovered in the right order, each symbol vector is sent repeatedly, according to the principle of maximum entropy. To ensure the intended receiver can recover the transmitted symbol vector, the random pre-coding matrices are selected such that a linear constraint imposed by the CSI of the legitimate channel is satisfied. In addition, an extended maximum likelihood (ML) detection method is developed for the desired receiver while the random pre-coding matrices are not required to be transmitted. We then analyze its security based on the signal detection theory to demonstrate that the intended receiver can recover the transmitted symbol vectors while the eavesdroppers are not capable of doing so. We also evaluate the performance of the proposed scheme to demonstrate its effectiveness.

DOI
10.1109/tifs.2019.2954742

Related papers

An approach to secure wireless communications using randomized eigenvector-based jamming signals

Shichuan Ma, Michael Hempel, Yaoqing Lamar Yang +1 more

In this paper, we propose a novel approach for providing secure wireless communications in transmit-receive diversity systems. In this approach, we precode the information-bearing signal with a uniquely generated randomized eigenvector-based jamming signal to impair the eavesdropper's received signal, while the main channel, the link between the transmitter and the desired receiver, remains unaffected. Unlike existing methods, our approach can be applied to any antenna array configuration, even when the receiver and eavesdropper utilize more antennas than the transmitter, with no benefits to the eavesdropper's information detection capability from employing more antenna elements. Moreover, our proposed approach can provide more degrees of freedom for the jamming signal, significantly increasing the provided level of security. Additionally, our scheme does not assume any knowledge about the eavesdropper or even the number of collaborating eavesdroppers. Our simulation results show a secrecy capacity increase of about 7 bits/s/Hz for a 4 x 4 antenna configuration under typical transmit power constraints, which results in significant improvement in security performance and enables physically secure wireless communications.

International Wireless Communications and Mobile Computing Conference (IWCMC)•Jun 28, 2010•10 citations

Secure multi-antenna transmission with finite-alphabet signaling

Sina Rezaei Aghdam

With the ever-growing demand for services that rely on transmission over wireless networks, a challenging issue is the security of the transmitted information. Due to its open nature, wireless communications is prone to eavesdropping attacks. Typically, secrecy of the transmitted information is ensured with the aid of cryptographic techniques, which are deployed on upper layers of the network protocol stack. However, due to the need for key distribution and management, cryptographic solutions are difficult to implement in decentralized networks. Moreover, the security provided by key based solutions is not provable from a mathematical point of view. Physical layer security is an alternative or complement to the cryptographic techniques, which can resolve the complexities associated with key distribution and management. The basic principle of physical layer security is to exploit the randomness of the communication channels to allow a transmitter deliver its message to an intended receiver reliably while guaranteeing that a third party cannot infer any information about it. Much of the existing research in physical layer security focuses on investigating the information theoretic limits of secure communications. Among different techniques proposed, multiple-antenna based solutions have been shown to exhibit a high potential for enhancing security. Furthermore, Gaussian inputs are proved to be the optimal input distributions in a variety of scenarios. However, due to the high detection complexity, Gaussian signaling is not used in practice, and the transmission is carried out with the aid of symbols drawn from standard signal constellations. In this thesis, we develop several secure multi-antenna transmission techniques under the practical finite-alphabet input assumption. We first consider multipleinput multiple-output (MIMO) wiretap channels under finite-alphabet input constraints. We assume that the statistical channel state information (CSI) of the eavesdropper is available at the transmitter, and study two different scenarios regarding the transmitter's knowledge on the main channel CSI (MCSI) including availability of perfect and statistical MCSI at the transmitter. In each scenario, we introduce iterative algorithms for joint optimization of data precoder and arti ficial noise. We also propose different strategies to reduce the computational complexity associated with the transmit signal design. Moreover, we consider the setups with simultaneous wireless information and power transfer (SWIPT), and propose transmission schemes for achieving the trade-off between the secrecy rate and the harvested power. We demonstrate the efficacy of the proposed transmit signal design algorithms via extensive numerical examples. We also introduce several secure transmission schemes with spatial modulation and space shift keying (SSK). We derive an expression for the achievable secrecy rate, and develop precoder optimization algorithms for its maximization using transmitter side CSI. Furthermore, we introduce a group of secure SSK transmission schemes, which rely on dynamic antenna index assignment over reciprocal channels. Our results reveal that the fundamentally different working principle of SSK opens up new avenues for secure multi-antenna transmission.

•Jan 1, 2018•1 citation

Physically secure wireless transmission using Deliberate Symbol Convolution

Mohammad Sadegh Mohammadi, G. R. Mohammadkhani

A physical layer security scheme based on joint antenna and timeslot randomization is proposed which is named Deliberate Symbol Convolution. In this scheme, consecutive phase modulated data symbols are convolved using random weights and the convolved symbols are sent simultaneously over a multi input - single output channel. The legitimate channel is estimated at the transmitter side using pilot symbols transmitted from the legitimate user. It is shown that randomization across timeslots compensates for the constraint on the length of data packets as well as the required number of receive antennas.

International Symposium on Telecommunications•Dec 1, 2010•2 citations

Physical Layer Secure MIMO Communications Against Eavesdroppers With Arbitrary Number of Antennas

Jie Tang, Long Jiao, Kai Zeng +2 more

Recently, MIMO (multiple-input-multiple-output) physical layer secure transmission has attracted great attentions. However, current schemes cannot defend against the passive eavesdroppers with arbitrary number of antennas. To address this problem, in this work, we propose a practical physical layer MIMO secure communication scheme (PLSC) to defend against such an eavesdropper with arbitrary number of antennas. In the proposed scheme, the transmitter first independently generates a random binary sequence as the “key bits (KB)” to “encrypt” (XOR) the confidential information. After that, the transmitter sends the “encrypted information” over the wireless channel, along with mapping key bits to the legitimate receiver simultaneously. The key principle lies in that the KB information is coded in the indexes of the activated/non-activated antennas combination of the legitimate user. Then, the legitimate receiver first observes his/her activated antenna indexes to obtain the corresponding key bits. After that, he/she demodulates the “encrypted information” at the activated antennas, and finally “decrypts” (XOR) the confidential information by using the observed key bits. However, due to the uniqueness and independence of MIMO wireless channel, for any other eavesdroppers who suffer an independent channel from legitimate users, we prove that it cannot observe any information about KB from the received signals, regardless of how many antennas it has used. Consequently, without knowledge of KB, it cannot decrypt any information about the confidential information, too. The reliability and security of PLSC are theoretically demonstrated. The simulation and numerical results fully verified the validity and effectiveness of the proposed scheme.

IEEE Transactions on Information Forensics and Security•Aug 11, 2020•35 citations

Information-guided randomization for wireless physical layer secure transmission

Qiao-long Li

Security capacity improvement is always the implementation goal of physical layer security, which can be achieved by deliberate randomization based on differentia and uniqueness of wireless channels through signal processing method. An information-guided randomization secure transmission scheme is proposed combined with a spatial modulation system in which information can be carried by receiving antennas index but actually by channel differentia. Randomization is generated along with channel modulation procedure realized by corresponding preprocessing to transmitting signals. We provide three approaches for designing preprocessing weights under different constraint conditions. The former two can only be used when the number of receiving antennas is less than transmitting and have a tradeoff with varying degrees between receiving performance and security. The third one then relaxes the limits via generalized spatial modulation and can be used for arbitrary antennas configuration but with a receiving performance compromise. Lastly, results of performance analysis and numerical evaluation show that the proposed secure scheme is effective to prohibit the eavesdropper from intercepting information.

IEEE Military Communications Conference (MILCOM)•Oct 1, 2012•7 citations

Toward Physical Layer Security via Two-dimensional Weighted Fractional Fourier Transform Based Spatial Modulation

Yongxin Huang, Xiaojie Fang, Xuejun Sha +2 more

In this paper, a two-dimensional weighted fractional Fourier transform (2DWFRFT) based secure spatial modulation (SM) scheme is proposed to enhance the physical layer security (PLS) of the wireless communication system. In the proposed scheme, 2DWFRFT is implemented as the security kernel for PLS provision. The invertibility and uniqueness of the 2DWFRFT effectively protect the confidential messages from being intercepted by the eavesdroppers while imposing no performance degradation on the legitimate receiver. Both the signal generation strategy and the ergodic secrecy rate analysis under discrete-input continuous-output memoryless (DCMC) channel have been elaborated to depict the security mechanism of the proposed scheme. The maximum likelihood (ML) detector and the separate detection (SD) algorithm are formulated to correctly recover the received signal of our system. Simulation results demonstrate that the proposed scheme can achieve a much higher secrecy capacity than artificial noise schemes without requiring additional jamming power consumption.

IEEE Vehicular Technology Conference•Sep 1, 2021•1 citation
Wireless communication security can be enhanced by leveraging the characteristics of the physical (PHY) layer, where discriminatory scrambling can be employed at the symbol level to either improve the signal quality of the legitimate receiver or degrade that of the eavesdroppers. However, in the presence of multiple passive eavesdroppers with more antennas than the transmitter, the transmitted signals can still be reliably separated from random disturbances. To mitigate this challenge, we propose a two-dimensional vectorized secure transmission scheme. Unlike existing transmission schemes (where the same data symbol is sent over each antenna with a predesigned complex weight at a time), in the proposed scheme, a sequence of data symbols in a predefined order (named symbol vector) is first pre-superposed through pre-coding with a random complex matrix prior to been sent as a vector in parallel over each transmitting antenna at a time. As a result, physical randomness of the legitimate channel is introduced into the received signals at passive eavesdroppers in the pre-coding procedure. Moreover, to ensure that transmitted data symbols can be recovered in the right order, each symbol vector is sent repeatedly, according to the principle of maximum entropy. To ensure the intended receiver can recover the transmitted symbol vector, the random pre-coding matrices are selected such that a linear constraint imposed by the CSI of the legitimate channel is satisfied. In addition, an extended maximum likelihood (ML) detection method is developed for the desired receiver while the random pre-coding matrices are not required to be transmitted. We then analyze its security based on the signal detection theory to demonstrate that the intended receiver can recover the transmitted symbol vectors while the eavesdroppers are not capable of doing so. We also evaluate the performance of the proposed scheme to demonstrate its effectiveness.
In this paper, we propose a novel approach for providing secure wireless communications in transmit-receive diversity systems. In this approach, we precode the information-bearing signal with a uniquely generated randomized eigenvector-based jamming signal to impair the eavesdropper's received signal, while the main channel, the link between the transmitter and the desired receiver, remains unaffected. Unlike existing methods, our approach can be applied to any antenna array configuration, even when the receiver and eavesdropper utilize more antennas than the transmitter, with no benefits to the eavesdropper's information detection capability from employing more antenna elements. Moreover, our proposed approach can provide more degrees of freedom for the jamming signal, significantly increasing the provided level of security. Additionally, our scheme does not assume any knowledge about the eavesdropper or even the number of collaborating eavesdroppers. Our simulation results show a secrecy capacity increase of about 7 bits/s/Hz for a 4 x 4 antenna configuration under typical transmit power constraints, which results in significant improvement in security performance and enables physically secure wireless communications.
With the ever-growing demand for services that rely on transmission over wireless networks, a challenging issue is the security of the transmitted information. Due to its open nature, wireless communications is prone to eavesdropping attacks. Typically, secrecy of the transmitted information is ensured with the aid of cryptographic techniques, which are deployed on upper layers of the network protocol stack. However, due to the need for key distribution and management, cryptographic solutions are difficult to implement in decentralized networks. Moreover, the security provided by key based solutions is not provable from a mathematical point of view. Physical layer security is an alternative or complement to the cryptographic techniques, which can resolve the complexities associated with key distribution and management. The basic principle of physical layer security is to exploit the randomness of the communication channels to allow a transmitter deliver its message to an intended receiver reliably while guaranteeing that a third party cannot infer any information about it. Much of the existing research in physical layer security focuses on investigating the information theoretic limits of secure communications. Among different techniques proposed, multiple-antenna based solutions have been shown to exhibit a high potential for enhancing security. Furthermore, Gaussian inputs are proved to be the optimal input distributions in a variety of scenarios. However, due to the high detection complexity, Gaussian signaling is not used in practice, and the transmission is carried out with the aid of symbols drawn from standard signal constellations. In this thesis, we develop several secure multi-antenna transmission techniques under the practical finite-alphabet input assumption. We first consider multipleinput multiple-output (MIMO) wiretap channels under finite-alphabet input constraints. We assume that the statistical channel state information (CSI) of the eavesdropper is available at the transmitter, and study two different scenarios regarding the transmitter's knowledge on the main channel CSI (MCSI) including availability of perfect and statistical MCSI at the transmitter. In each scenario, we introduce iterative algorithms for joint optimization of data precoder and arti ficial noise. We also propose different strategies to reduce the computational complexity associated with the transmit signal design. Moreover, we consider the setups with simultaneous wireless information and power transfer (SWIPT), and propose transmission schemes for achieving the trade-off between the secrecy rate and the harvested power. We demonstrate the efficacy of the proposed transmit signal design algorithms via extensive numerical examples. We also introduce several secure transmission schemes with spatial modulation and space shift keying (SSK). We derive an expression for the achievable secrecy rate, and develop precoder optimization algorithms for its maximization using transmitter side CSI. Furthermore, we introduce a group of secure SSK transmission schemes, which rely on dynamic antenna index assignment over reciprocal channels. Our results reveal that the fundamentally different working principle of SSK opens up new avenues for secure multi-antenna transmission.
A physical layer security scheme based on joint antenna and timeslot randomization is proposed which is named Deliberate Symbol Convolution. In this scheme, consecutive phase modulated data symbols are convolved using random weights and the convolved symbols are sent simultaneously over a multi input - single output channel. The legitimate channel is estimated at the transmitter side using pilot symbols transmitted from the legitimate user. It is shown that randomization across timeslots compensates for the constraint on the length of data packets as well as the required number of receive antennas.
Recently, MIMO (multiple-input-multiple-output) physical layer secure transmission has attracted great attentions. However, current schemes cannot defend against the passive eavesdroppers with arbitrary number of antennas. To address this problem, in this work, we propose a practical physical layer MIMO secure communication scheme (PLSC) to defend against such an eavesdropper with arbitrary number of antennas. In the proposed scheme, the transmitter first independently generates a random binary sequence as the “key bits (KB)” to “encrypt” (XOR) the confidential information. After that, the transmitter sends the “encrypted information” over the wireless channel, along with mapping key bits to the legitimate receiver simultaneously. The key principle lies in that the KB information is coded in the indexes of the activated/non-activated antennas combination of the legitimate user. Then, the legitimate receiver first observes his/her activated antenna indexes to obtain the corresponding key bits. After that, he/she demodulates the “encrypted information” at the activated antennas, and finally “decrypts” (XOR) the confidential information by using the observed key bits. However, due to the uniqueness and independence of MIMO wireless channel, for any other eavesdroppers who suffer an independent channel from legitimate users, we prove that it cannot observe any information about KB from the received signals, regardless of how many antennas it has used. Consequently, without knowledge of KB, it cannot decrypt any information about the confidential information, too. The reliability and security of PLSC are theoretically demonstrated. The simulation and numerical results fully verified the validity and effectiveness of the proposed scheme.
Security capacity improvement is always the implementation goal of physical layer security, which can be achieved by deliberate randomization based on differentia and uniqueness of wireless channels through signal processing method. An information-guided randomization secure transmission scheme is proposed combined with a spatial modulation system in which information can be carried by receiving antennas index but actually by channel differentia. Randomization is generated along with channel modulation procedure realized by corresponding preprocessing to transmitting signals. We provide three approaches for designing preprocessing weights under different constraint conditions. The former two can only be used when the number of receiving antennas is less than transmitting and have a tradeoff with varying degrees between receiving performance and security. The third one then relaxes the limits via generalized spatial modulation and can be used for arbitrary antennas configuration but with a receiving performance compromise. Lastly, results of performance analysis and numerical evaluation show that the proposed secure scheme is effective to prohibit the eavesdropper from intercepting information.
In this paper, a two-dimensional weighted fractional Fourier transform (2DWFRFT) based secure spatial modulation (SM) scheme is proposed to enhance the physical layer security (PLS) of the wireless communication system. In the proposed scheme, 2DWFRFT is implemented as the security kernel for PLS provision. The invertibility and uniqueness of the 2DWFRFT effectively protect the confidential messages from being intercepted by the eavesdroppers while imposing no performance degradation on the legitimate receiver. Both the signal generation strategy and the ergodic secrecy rate analysis under discrete-input continuous-output memoryless (DCMC) channel have been elaborated to depict the security mechanism of the proposed scheme. The maximum likelihood (ML) detector and the separate detection (SD) algorithm are formulated to correctly recover the received signal of our system. Simulation results demonstrate that the proposed scheme can achieve a much higher secrecy capacity than artificial noise schemes without requiring additional jamming power consumption.