Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Characterize the switching performance of a superconducting nanowire cryotron for reading superconducting nanowire single photon detectors

Kai Zheng, Qingyuan Zhao, Ling-Dong Kong, Shi Chen, Hai-Yang-Bo Lu, Xuecou Tu, Labao Zhang, Xiaoqing Jia, Jian Chen, Lin Kang, Peiheng Wu

Published Nov 8, 2019• 17 citations
Publisher

Abstract

Scalable superconducting nanowire single photon detector (SNSPDs) arrays require cryogenic digital circuits for multiplexing the output detection pulses. Among existing superconducting digital devices, superconducting nanowire cryotron (nTron) is a three-terminal device with an ultra-compact size, which is promising for large scale monolithic integration. In this report, in order to evaluate the potential and possibility of using nTrons for reading and digitizing SNSPD signals, we characterized the grey zone, speed, timing jitter and power dissipation of a proper designed nTron. With a DC bias on the gate, the nTron can be triggered by a few μA high and nanoseconds wide input signal, showing the nTron was capable of reading an SNSPD pulse at the same signal level. The timing jitter depended on the input signal level. For a 20 μA high and 5 ns wide input pulse, the timing jitter was 33.3 ps, while a typical SNSPD's jitter was around 50 ps. With removing the serial inductors and operating it in an AC bias mode. The nTron was demonstrated to be operated at a clock frequency of 615.4 MHz, which was faster than the maximum counting rate of a typical SNSPD. In additional, with a 50 Ω bias resistor and biased at 17.6 μA, the nTron had a total power dissipation of 19.7 nW. Although RSFQ circuits are faster than nTrons, for reading SNSPD or other detector arrays that demands less operation speed, our results suggest a digital circuit made from nTrons could be another promising alternative.

DOI
10.1038/s41598-019-52874-3

Related papers

Monolithic integrated superconducting nanowire digital encoder

Yang‐Hui Huang, Qingyuan Zhao, Hao Hao +11 more

Superconducting digital circuits are promising technologies that can overcome bottlenecks in both classical and quantum computation due to their ultra-high operation speed and extremely low power dissipation. Superconducting nanowire cryotrons (nTrons) are emerging as one type of superconductor switching devices, offering advantages complementary to conventional Josephson junctions. Achieving monolithic integration of a reasonable number of nTrons into a functional digital circuit is a crucial step to extend its application. In this study, we constructed a monolithic integrated nTron-based binary encoder, which includes input fanout circuits, on-chip biasing, combinational logic routing and multi-gate nTrons. This represents a monolithic nTron digital circuit comprising 137 nTron gates, 424 resistors, 274 inductors, and 164 vias developed using a two-superconducting-layer fabrication process. The performance of this monolithic nTron encoder surpasses that of our previously demonstrated circuit with discrete nTron components. The maximum bias margin is 28% for the fanout circuit and 60% for the multi-gate nTron when using a signal generator, while the minimum timing jitter is 40 ps. The total power dissipation mainly from biasing resistors is 19.6 μW, making it more power efficient than RSFQ encoders. The encoder is then packaged and connected with a superconducting nanowire single-photon detector array for demonstrating its function of addressing pixel locations. Compared to the conventional readout, the nTron encoder shows a minimum readout error rate lower than 10−4 and reduces the readout RF lines from 15 to 4. The design and fabrication technologies could enrich integrated nTron digital circuits beyond current limits and promote their applications in classical and quantum systems.

Applied Physics Letters•May 6, 2024•13 citations

Superconducting nanowire single-photon imager

Qingyuan Zhao, Francesco Bellei, Di Zhu +6 more

Detecting spatial and temporal information of individual photons is a crucial technology in today's quantum information science. Among the existing single-photon detectors, superconducting nanowire single-photon detectors (SNSPDs) have been demonstrated with a sub-50 ps timing jitter, near unity detection efficiency1, wide response spectrum from visible to infrared and ~10 ns reset time. However, to gain spatial sensitivity, multiple SNSPDs have to be integrated into an array, whose spatial and temporal resolutions are limited by the multiplexing circuit. Here, we add spatial sensitivity to a single nanowire while preserving the temporal resolution from an SNSPD, thereby turning an SNSPD into a superconducting nanowire single-photon imager (SNSPI). To achieve an SNSPI, we modify a nanowire's electrical behavior from a lumped inductor to a transmission line, where the signal velocity is slowed down to 0.02c (where c is the speed of light). Consequently, we are able to simultaneously read out the landing locations and arrival times of the photons from the output electrical pulses using only two connections. We have demonstrated single-photon imaging by using a 19.7 mm long SNSPI, which is meandered into an imaging area of 286 {\mu}m*193 {\mu}m. The nanowire has a temporal resolution of 50 ps for detecting 1.5 {\mu}m photons. The 2D spatial resolution is 13.0 {\mu}m in the vertical direction and 5.6 {\mu}m in the horizontal direction. The maximum number of resolvable locations (i.e., the effective number of pixels) in such a long nanowire is calculated to be 590. Rather than operating an individual detector in a scanning mode or using SPD arrays, this SNSPI gives an alternative approach to taking large-scale single-photon images and measuring temporal and spatial correlation.

•May 27, 2016•0 citations

Demonstration of digital readout circuit for superconducting nanowire single photon detector

Thomas Ortlepp, M. Hofherr, Ludwig Fritzsch +6 more

We demonstrate the transfer of single photon triggered electrical pulses from a superconducting nanowire single photon detector (SNSPD) to a single flux quantum (SFQ) pulse. We describe design and test of a digital SFQ based SNSPD readout circuit and demonstrate its correct operation. Both circuits (SNSPD and SFQ) operate under the same cryogenic conditions and are directly connected by wire bonds. A future integration of the present multi-chip configuration seems feasible because both fabrication process and materials are very similar. In contrast to commonly used semiconductor amplifiers, SFQ circuits combine very low power dissipation (a few microwatts) with very high operation speed, thus enabling count-rates of several gigahertz. The SFQ interface circuit simplifies the SNSPD readout and enables large numbers of detectors for future compact multi-pixel systems with single photon counting resolution. The demonstrated circuit has great potential for scaling the present interface solution to 1,000 detectors by using a single SFQ chip.

Optics Express•Sep 8, 2011•57 citations

A Superconducting Binary Encoder with Multigate Nanowire Cryotrons

Kai Zheng, Qingyuan Zhao, Hai-Yang-Bo Lu +11 more

Abstract Many classic and quantum devices need to operate at cryogenic temperatures, demanding advanced cryogenic digital electronics for processing the input and output signals on a chip to extend their scalability and performance. Here, we report a superconducting binary encoder with ultralow power dissipation and ultracompact size. We introduce a multigate superconducting nanowire cryotron (nTron) that functions as an 8-input OR gate within a footprint of approximately 0.5 μm2. Four cryotrons compose a 4-bit encoder that has a bias margin of 18.9%, an operation speed greater than 250 MHz, an average switching jitter of 75 ps, and a power dissipation of less than 1 μW. We apply this encoder to read out a superconducting-nanowire single-photon detector array whose pixel location is digitized into a 4-bit binary address. The small size of the nanowire combined with the low power dissipation makes nTrons promising for future monolithic integration.

Nano Letters•Apr 14, 2020•27 citations

A tunable coincidence counter based on superconducting nanowire cryotrons

Nai‐Tao Liu, Qingyuan Zhao, Y Huang +16 more

Single-photon coincidence counters are essential components in integrated quantum photonics, enabling efficient logic discrimination and real-time error correction at the chip level. However, monolithic integration at cryogenic temperature remains challenging. Here, we demonstrate a coincidence counter based on superconducting nanowire cryotrons (nTron). The circuit comprises five nTron devices, including delay gates, buffer gates, and an AND gate, achieving a maximum bias margin of 22% at a bit error rate (BER) of 10−5. Operating at 1 MHz, the counter exhibits a static power consumption of 282 nW and a dynamic power consumption of approximately 2 nW at a maximum operation frequency of 17 MHz. The coincidence time window is tunable, with a minimum width below 1 ns, and its position can be adjusted via bias currents. This design offers compatibility with superconducting nanowire single-photon detectors in fabrication and operation, supporting monolithic integration for scalable quantum photonic systems.

Applied Physics Letters•Jun 29, 2026•0 citations

Scalable cryogenic readout circuit for a superconducting nanowire single-photon detector system

Clinton Cahall, Daniel J. Gauthier, Jungsang Kim

The superconducting nanowire single-photon detector (SNSPD) is a leading technology for quantum information science applications using photons, and is finding increasing uses in photon-starved classical imaging applications. Critical detector characteristics, such as timing resolution (jitter), reset time, and maximum count rate, are heavily influenced by the readout electronics that sense and amplify the photon detection signal. We describe a readout circuit for SNSPDs using commercial off-the-shelf amplifiers operating at cryogenic temperatures. Our design demonstrates a 35 ps timing resolution and a maximum count rate of over 2 × 107 counts per second, while maintaining <3 mW power consumption per channel, making it suitable for a multichannel readout.

arXiv:1710.04684•Review of Scientific Instruments•Jun 1, 2018•28 citations
Scalable superconducting nanowire single photon detector (SNSPDs) arrays require cryogenic digital circuits for multiplexing the output detection pulses. Among existing superconducting digital devices, superconducting nanowire cryotron (nTron) is a three-terminal device with an ultra-compact size, which is promising for large scale monolithic integration. In this report, in order to evaluate the potential and possibility of using nTrons for reading and digitizing SNSPD signals, we characterized the grey zone, speed, timing jitter and power dissipation of a proper designed nTron. With a DC bias on the gate, the nTron can be triggered by a few μA high and nanoseconds wide input signal, showing the nTron was capable of reading an SNSPD pulse at the same signal level. The timing jitter depended on the input signal level. For a 20 μA high and 5 ns wide input pulse, the timing jitter was 33.3 ps, while a typical SNSPD's jitter was around 50 ps. With removing the serial inductors and operating it in an AC bias mode. The nTron was demonstrated to be operated at a clock frequency of 615.4 MHz, which was faster than the maximum counting rate of a typical SNSPD. In additional, with a 50 Ω bias resistor and biased at 17.6 μA, the nTron had a total power dissipation of 19.7 nW. Although RSFQ circuits are faster than nTrons, for reading SNSPD or other detector arrays that demands less operation speed, our results suggest a digital circuit made from nTrons could be another promising alternative.
Superconducting digital circuits are promising technologies that can overcome bottlenecks in both classical and quantum computation due to their ultra-high operation speed and extremely low power dissipation. Superconducting nanowire cryotrons (nTrons) are emerging as one type of superconductor switching devices, offering advantages complementary to conventional Josephson junctions. Achieving monolithic integration of a reasonable number of nTrons into a functional digital circuit is a crucial step to extend its application. In this study, we constructed a monolithic integrated nTron-based binary encoder, which includes input fanout circuits, on-chip biasing, combinational logic routing and multi-gate nTrons. This represents a monolithic nTron digital circuit comprising 137 nTron gates, 424 resistors, 274 inductors, and 164 vias developed using a two-superconducting-layer fabrication process. The performance of this monolithic nTron encoder surpasses that of our previously demonstrated circuit with discrete nTron components. The maximum bias margin is 28% for the fanout circuit and 60% for the multi-gate nTron when using a signal generator, while the minimum timing jitter is 40 ps. The total power dissipation mainly from biasing resistors is 19.6 μW, making it more power efficient than RSFQ encoders. The encoder is then packaged and connected with a superconducting nanowire single-photon detector array for demonstrating its function of addressing pixel locations. Compared to the conventional readout, the nTron encoder shows a minimum readout error rate lower than 10−4 and reduces the readout RF lines from 15 to 4. The design and fabrication technologies could enrich integrated nTron digital circuits beyond current limits and promote their applications in classical and quantum systems.
Detecting spatial and temporal information of individual photons is a crucial technology in today's quantum information science. Among the existing single-photon detectors, superconducting nanowire single-photon detectors (SNSPDs) have been demonstrated with a sub-50 ps timing jitter, near unity detection efficiency1, wide response spectrum from visible to infrared and ~10 ns reset time. However, to gain spatial sensitivity, multiple SNSPDs have to be integrated into an array, whose spatial and temporal resolutions are limited by the multiplexing circuit. Here, we add spatial sensitivity to a single nanowire while preserving the temporal resolution from an SNSPD, thereby turning an SNSPD into a superconducting nanowire single-photon imager (SNSPI). To achieve an SNSPI, we modify a nanowire's electrical behavior from a lumped inductor to a transmission line, where the signal velocity is slowed down to 0.02c (where c is the speed of light). Consequently, we are able to simultaneously read out the landing locations and arrival times of the photons from the output electrical pulses using only two connections. We have demonstrated single-photon imaging by using a 19.7 mm long SNSPI, which is meandered into an imaging area of 286 {\mu}m*193 {\mu}m. The nanowire has a temporal resolution of 50 ps for detecting 1.5 {\mu}m photons. The 2D spatial resolution is 13.0 {\mu}m in the vertical direction and 5.6 {\mu}m in the horizontal direction. The maximum number of resolvable locations (i.e., the effective number of pixels) in such a long nanowire is calculated to be 590. Rather than operating an individual detector in a scanning mode or using SPD arrays, this SNSPI gives an alternative approach to taking large-scale single-photon images and measuring temporal and spatial correlation.
We demonstrate the transfer of single photon triggered electrical pulses from a superconducting nanowire single photon detector (SNSPD) to a single flux quantum (SFQ) pulse. We describe design and test of a digital SFQ based SNSPD readout circuit and demonstrate its correct operation. Both circuits (SNSPD and SFQ) operate under the same cryogenic conditions and are directly connected by wire bonds. A future integration of the present multi-chip configuration seems feasible because both fabrication process and materials are very similar. In contrast to commonly used semiconductor amplifiers, SFQ circuits combine very low power dissipation (a few microwatts) with very high operation speed, thus enabling count-rates of several gigahertz. The SFQ interface circuit simplifies the SNSPD readout and enables large numbers of detectors for future compact multi-pixel systems with single photon counting resolution. The demonstrated circuit has great potential for scaling the present interface solution to 1,000 detectors by using a single SFQ chip.
Abstract Many classic and quantum devices need to operate at cryogenic temperatures, demanding advanced cryogenic digital electronics for processing the input and output signals on a chip to extend their scalability and performance. Here, we report a superconducting binary encoder with ultralow power dissipation and ultracompact size. We introduce a multigate superconducting nanowire cryotron (nTron) that functions as an 8-input OR gate within a footprint of approximately 0.5 μm2. Four cryotrons compose a 4-bit encoder that has a bias margin of 18.9%, an operation speed greater than 250 MHz, an average switching jitter of 75 ps, and a power dissipation of less than 1 μW. We apply this encoder to read out a superconducting-nanowire single-photon detector array whose pixel location is digitized into a 4-bit binary address. The small size of the nanowire combined with the low power dissipation makes nTrons promising for future monolithic integration.
Single-photon coincidence counters are essential components in integrated quantum photonics, enabling efficient logic discrimination and real-time error correction at the chip level. However, monolithic integration at cryogenic temperature remains challenging. Here, we demonstrate a coincidence counter based on superconducting nanowire cryotrons (nTron). The circuit comprises five nTron devices, including delay gates, buffer gates, and an AND gate, achieving a maximum bias margin of 22% at a bit error rate (BER) of 10−5. Operating at 1 MHz, the counter exhibits a static power consumption of 282 nW and a dynamic power consumption of approximately 2 nW at a maximum operation frequency of 17 MHz. The coincidence time window is tunable, with a minimum width below 1 ns, and its position can be adjusted via bias currents. This design offers compatibility with superconducting nanowire single-photon detectors in fabrication and operation, supporting monolithic integration for scalable quantum photonic systems.
The superconducting nanowire single-photon detector (SNSPD) is a leading technology for quantum information science applications using photons, and is finding increasing uses in photon-starved classical imaging applications. Critical detector characteristics, such as timing resolution (jitter), reset time, and maximum count rate, are heavily influenced by the readout electronics that sense and amplify the photon detection signal. We describe a readout circuit for SNSPDs using commercial off-the-shelf amplifiers operating at cryogenic temperatures. Our design demonstrates a 35 ps timing resolution and a maximum count rate of over 2 × 107 counts per second, while maintaining <3 mW power consumption per channel, making it suitable for a multichannel readout.