Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Analytical design of axial magnetic coils with systematically improved uniformity for miniature quantum devices

Yi Zhang, Yujiao Li, Qiyuan Jiang, Zhiguo Wang, Tao Xia, Hui Luo

Published Nov 1, 2019• 8 citations
Publisher

Abstract

We describe an analytical design method of shielding-coupled uniform magnetic coils for miniature quantum devices. The theoretical and simulation results point out that the 99% range along the symmetrical axis and the 50% range along the radius of the proposed m = 3 coils are uniform, and more important is that both the uniformity and the uniform region for these kinds of coils can be systematically improved only by adding more loops at specific places obtained from our analytical formula. A relevant experiment demonstrates the feasibility of this method and realizes the m = 3 coils with the inhomogeneity below 2.6 × 10−3 along nearly the whole symmetrical axis. In addition, a practical technology to remove the influence of the shielding’s nonideal gaps and openings is proposed and realized. All of these results are crucial for the miniaturization and high performance of quantum devices.

DOI
10.1063/1.5108511

Related papers

Optimised hybrid shielding and magnetic field control for emerging quantum technologies

Peter J. Hobson, Michael Packer, Niall Holmes +11 more

The accurate control of magnetic fields is a cornerstone of multiple emerging quantum technologies. These technologies often require passive high permeability magnetic shielding and internal active field-generating coils to create their own bespoke magnetic field landscape. However, magnetic fields generated by coils are distorted by high permeability shielding, preventing the accurate and efficient generation of the desired field environment. Here, we design a cylindrical four-layer magnetic shield with an interior hybrid active-passive coil system that is explicitly optimised to include the electromagnetic coupling between the active and passive components. We use a combination of analytical methods and numerical simulations to determine the shield parameters - geometry, thickness, and access hole positions - to maximise the passive shielding efficiency and minimise the shield-induced Johnson noise and weight. Then, we apply an analytical formulation of the magnetic field, which accounts for the interaction with the magnetic shield, to design nine orthogonal hybrid active-passive field-generating coils inside the shield. The coils will be manufactured on thin low-via flex-PCBs near the shield's interior surface and generate three uniform fields and six gradient fields that deviate by less than 0.4% and 2%, respectively, over an internal cylindrical region extending over half the diameter and length of the innermost shield layer. These hybrid active-passive coils can accurately remove deviations in the background field or generate various complex magnetic field landscapes. Consequently, the hybrid shield provides an ideal platform for miniaturising and commercialising quantum technologies that require precisely-controlled magnetic fields within a low-noise environment.

Quantum Technology: Driving Commercialisation of an Enabling Science•Oct 6, 2021•5 citations

In Situ Study of the Magnetic Field Gradient Produced by a Miniature Bi-Planar Coil for Chip-Scale Atomic Devices

Yao Chen, Jiyang Wang, Ning Zhang +6 more

The miniaturization of quantum sensors is a popular trend for the development of quantum technology. One of the key components of these sensors is a coil which is used for spin modulation and manipulation. The bi-planar coils have the advantage of producing three-dimensional magnetic fields with only two planes of current confinement, whereas the traditional Helmholtz coils require three-dimensional current distribution. Thus, the bi-planar coils are compatible with the current micro-fabrication process and are quite suitable for the compact design of the chip-scale atomic devices that require stable or modulated magnetic fields. This paper presents a design of a miniature bi-planar coil. Both the magnetic fields produced by the coils and their inhomogeneities were designed theoretically. The magnetic field gradient is a crucial parameter for the coils, especially for generating magnetic fields in very small areas. We used a NMR (Nuclear Magnetic Resonance) method based on the relaxation of 131Xe nuclear spins to measure the magnetic field gradient in situ. This is the first time that the field inhomogeneities of the field of such small bi-planar coils have been measured. Our results indicate that the designed gradient caused error is 0.08 for the By and the Bx coils, and the measured gradient caused error using the nuclear spin relaxation method is 0.09±0.02, suggesting that our method is suitable for measuring gradients. Due to the poor sensitivity of our magnetometer under a large Bz bias field, we could not measure the Bz magnetic field gradient. Our method also helps to improve the gradients of the miniature bi-planar coil design, which is critical for chip-scale atomic devices.

Micromachines•Oct 26, 2023•5 citations

Bespoke magnetic field design for a magnetically shielded cold atom interferometer

Peter J. Hobson, Jamie Vovrosh, Ben Stray +10 more

Abstract Quantum sensors based on cold atoms are being developed which produce measurements of unprecedented accuracy. Due to shifts in atomic energy levels, quantum sensors often have stringent requirements on their internal magnetic field environment. Typically, background magnetic fields are attenuated using high permeability magnetic shielding, with the cancelling of residual and introduction of quantisation fields implemented with coils inside the shield. The high permeability shield, however, distorts all magnetic fields, including those generated inside the sensor. Here, we demonstrate a solution by designing multiple coils overlaid on a 3D-printed former to generate three uniform and three constant linear gradient magnetic fields inside the capped cylindrical magnetic shield of a cold atom interferometer. The fields are characterised in-situ and match their desired forms to high accuracy. For example, the uniform transverse field, Bx, deviates by less than 0.2% over more than 40% of the length of the shield. We also map the field directly using the cold atoms and investigate the potential of the coil system to reduce bias from the quadratic Zeeman effect. This coil design technology enables targeted field compensation over large spatial volumes and has the potential to reduce systematic shifts and noise in numerous cold atom systems.

arXiv:2110.04498•Scientific Reports•Jun 22, 2022•21 citations

Magnetic modelling, analysis and on-chip shielding of SFQ Circuits

Rodwell S. Bakolo

ENGLISH ABSTRACT: Single Flux Quantum (SFQ) based electronic circuits are susceptible to failure if exposed to external magnetic fields, even in very small quantities. Operating margins of SFQ circuits have shown to decrease significantly in the presence of magnetic fields as small as 5 μT. This challenge makes SFQ circuits infeasible for the normal environment in which other technologies, such as CMOS, operate. Sources of magnetic fields include SFQ circuit’s own bias lines, the Earth, which can produce magnetic fields up to 65 μT and any other electromagnetic interference sources. Without protective measures, most SFQ circuits cannot work in the open environment. \nBy using the tools available in the inductance extraction tool, InductEx, a method for projecting uniform magnetic fields, of varying orientations on SFQ cells, strides have been made to make SFQ circuits more tolerant to magnetic fields. On-chip analysis of SFQ cells was done in the presence of magnetic fields from the x, y and z orientations. In addition, by varying currents in 3-D coils, the orientation of the magnetic fields can be varied. This way, it is now possible to analyse bias, parameter and operating field margins of SFQ cells in any direction of the magnetic field. \nTwo on-chip shielding solutions were analysed and developed. The conventional continuous superconductor \nlayer shield, dubbed the solid shield, and the grid shield. The grid shield resembles a Faraday \ncage and it is implemented by laying out bars of 2.5 μm width using the topmost layer in the Hypres0 \n4.5 kA/cm2 process. The solid shield is more effective against perpendicular (z-directed) magnetic fields \nthan against those in-plain (x and y-directed). In addition, the solid shield’s inclusion in SFQ cells results \nin the reduction of circuit inductance by up to 25 %. The grid shield is a very effective approach against \nin-plane magnetic fields. However, its effectiveness is inversely proportional to the spacing between grid \nbars. Compared to the solid shield, the grid shield has less effect on circuit inductance with a typical \nreduction of 8 % at a grid bar spacing of 5 μm. The large reduction in inductance can be overcome \nby making the inductors thinner and shorter. Shielding effectiveness of on-chip shields is enhanced by \nmaking ground contact vias from the shield layer to the ground plane. So far, uniformly grounded shields \nhave shown to be the most effective approach. \nThe solid shield improved the operating field margin of a DFF cell against a z-directed magnetic field \nfrom 30 μT to 531 μT, while the grid shield, of 5 μm grid spacing, improved the margins from 68 μT \nto 290 μT against an x-directed magnetic field. In the DC-SFQ cell, the operating field margin was \nimproved with a solid shield from 47 μT to 464 μT, against a z-directed magnetic field, while with a \ngrid shield, the improvement was from 211 μT to 381 μT, against an x-directed fields. \nTo further enhance the magnetic field tolerance of SFQ circuits, design tenets that target specific components, \nsuch as inductors, were analysed. Thin and narrow inductors have shown less coupling to \nexternal magnetic fields. In addition, moats have shown to influence OFM results depending on the \norientation of magnetic fields. \nThis work has delivered design and analysis methods for magnetic field tolerant SFQ circuits.

•Mar 1, 2018•0 citations

Aperture-Integrated Biplanar Coil Based on an Improved Target-Field Method for Chip-Scale Magnetometer

Gen Hu, Jixi Lu, Lu Liu +4 more

In recent years, nanofabrication technology is accelerating the miniaturization of atomic magnetometers, which is attracting widespread interest due to emerging applications in magnetocardiography and magnetoencephalography. However, it is challenging for CMOS-compatible magnetic coils to preserve the necessary optical aperture for pumping incidence, hindering further integration of the magnetometer to chip-scale. This article proposes an improved target-field method for the design of aperture-integrated biplanar coils tailored for microintegrated atomic magnetometers. Two stream functions with different side lengths and shared basis-function coefficients are predefined, and their difference is used to construct a new stream function for coil design. A 3-mm-diameter optical aperture is designed on the coil plane while maintaining high-magnetic-field uniformity. The proposed coils are fabricated through a CMOS-compatible process, and a miniaturized single-beam atomic magnetometer is constructed by combining our device with a 4-mm Rb vapor cell. Experimental results show that the noise floor of 25 fT/$\mathrm{Hz}^{\mathrm {1/2}}$is achieved with pumping light directly propagating through the optical aperture. Compared with a conventional Helmholtz coil, the maximum magnetic-field inhomogeneity is reduced from 10.7% to 2.9%. Our method is promising for on-cell integration of multiple magnetic-field coils, which pave the way for further miniaturization of chip-scale atomic magnetometer systems.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2026•1 citation

Novel Coupling Scheme for the Dynamics of Non-Uniform Coupled SQUID

Patrick Longhini, Anna Leese de Escobar, F. Escobar +2 more

Recently, there is a growing interest in non-uniform coupled SQUID devices in the science community. Similar to how antenna array technology has moved from uniform arrays to non-uniform, sparsely populated arrays, the traditional uniform SQUID arrays evolves to an unconventional structure making these mesoscopic quantum devices (for RF reception) a feasible concept. The focus of this work covers theoretical and numerical computations which exploits well-designed coupling schemes to modeling the dynamics of the device where the behavior of the non-periodic voltage response related to the external flux exhibits an anti-peak which is present only around the zero applied magnetic field. It is know that many nonlinear dynamical systems are highly sensitive to small external perturbations, especially when they are near the onset of a bifurcation. Exploring parameter variations, such as; inductive coupling between neighboring elements, unconventional grating and fabrication parameters may lead to a significant performance enhancement. There are theoretical indications that variations in coupling could provide very high dynamic range. Application of these devices with the ability to detect and amplify will result in a new generation of electrically small antennas.

IEEE Transactions on Applied Superconductivity•May 27, 2009•5 citations
We describe an analytical design method of shielding-coupled uniform magnetic coils for miniature quantum devices. The theoretical and simulation results point out that the 99% range along the symmetrical axis and the 50% range along the radius of the proposed m = 3 coils are uniform, and more important is that both the uniformity and the uniform region for these kinds of coils can be systematically improved only by adding more loops at specific places obtained from our analytical formula. A relevant experiment demonstrates the feasibility of this method and realizes the m = 3 coils with the inhomogeneity below 2.6 × 10−3 along nearly the whole symmetrical axis. In addition, a practical technology to remove the influence of the shielding’s nonideal gaps and openings is proposed and realized. All of these results are crucial for the miniaturization and high performance of quantum devices.
The accurate control of magnetic fields is a cornerstone of multiple emerging quantum technologies. These technologies often require passive high permeability magnetic shielding and internal active field-generating coils to create their own bespoke magnetic field landscape. However, magnetic fields generated by coils are distorted by high permeability shielding, preventing the accurate and efficient generation of the desired field environment. Here, we design a cylindrical four-layer magnetic shield with an interior hybrid active-passive coil system that is explicitly optimised to include the electromagnetic coupling between the active and passive components. We use a combination of analytical methods and numerical simulations to determine the shield parameters - geometry, thickness, and access hole positions - to maximise the passive shielding efficiency and minimise the shield-induced Johnson noise and weight. Then, we apply an analytical formulation of the magnetic field, which accounts for the interaction with the magnetic shield, to design nine orthogonal hybrid active-passive field-generating coils inside the shield. The coils will be manufactured on thin low-via flex-PCBs near the shield's interior surface and generate three uniform fields and six gradient fields that deviate by less than 0.4% and 2%, respectively, over an internal cylindrical region extending over half the diameter and length of the innermost shield layer. These hybrid active-passive coils can accurately remove deviations in the background field or generate various complex magnetic field landscapes. Consequently, the hybrid shield provides an ideal platform for miniaturising and commercialising quantum technologies that require precisely-controlled magnetic fields within a low-noise environment.
The miniaturization of quantum sensors is a popular trend for the development of quantum technology. One of the key components of these sensors is a coil which is used for spin modulation and manipulation. The bi-planar coils have the advantage of producing three-dimensional magnetic fields with only two planes of current confinement, whereas the traditional Helmholtz coils require three-dimensional current distribution. Thus, the bi-planar coils are compatible with the current micro-fabrication process and are quite suitable for the compact design of the chip-scale atomic devices that require stable or modulated magnetic fields. This paper presents a design of a miniature bi-planar coil. Both the magnetic fields produced by the coils and their inhomogeneities were designed theoretically. The magnetic field gradient is a crucial parameter for the coils, especially for generating magnetic fields in very small areas. We used a NMR (Nuclear Magnetic Resonance) method based on the relaxation of 131Xe nuclear spins to measure the magnetic field gradient in situ. This is the first time that the field inhomogeneities of the field of such small bi-planar coils have been measured. Our results indicate that the designed gradient caused error is 0.08 for the By and the Bx coils, and the measured gradient caused error using the nuclear spin relaxation method is 0.09±0.02, suggesting that our method is suitable for measuring gradients. Due to the poor sensitivity of our magnetometer under a large Bz bias field, we could not measure the Bz magnetic field gradient. Our method also helps to improve the gradients of the miniature bi-planar coil design, which is critical for chip-scale atomic devices.
Abstract Quantum sensors based on cold atoms are being developed which produce measurements of unprecedented accuracy. Due to shifts in atomic energy levels, quantum sensors often have stringent requirements on their internal magnetic field environment. Typically, background magnetic fields are attenuated using high permeability magnetic shielding, with the cancelling of residual and introduction of quantisation fields implemented with coils inside the shield. The high permeability shield, however, distorts all magnetic fields, including those generated inside the sensor. Here, we demonstrate a solution by designing multiple coils overlaid on a 3D-printed former to generate three uniform and three constant linear gradient magnetic fields inside the capped cylindrical magnetic shield of a cold atom interferometer. The fields are characterised in-situ and match their desired forms to high accuracy. For example, the uniform transverse field, Bx, deviates by less than 0.2% over more than 40% of the length of the shield. We also map the field directly using the cold atoms and investigate the potential of the coil system to reduce bias from the quadratic Zeeman effect. This coil design technology enables targeted field compensation over large spatial volumes and has the potential to reduce systematic shifts and noise in numerous cold atom systems.
ENGLISH ABSTRACT: Single Flux Quantum (SFQ) based electronic circuits are susceptible to failure if exposed to external magnetic fields, even in very small quantities. Operating margins of SFQ circuits have shown to decrease significantly in the presence of magnetic fields as small as 5 μT. This challenge makes SFQ circuits infeasible for the normal environment in which other technologies, such as CMOS, operate. Sources of magnetic fields include SFQ circuit’s own bias lines, the Earth, which can produce magnetic fields up to 65 μT and any other electromagnetic interference sources. Without protective measures, most SFQ circuits cannot work in the open environment. \nBy using the tools available in the inductance extraction tool, InductEx, a method for projecting uniform magnetic fields, of varying orientations on SFQ cells, strides have been made to make SFQ circuits more tolerant to magnetic fields. On-chip analysis of SFQ cells was done in the presence of magnetic fields from the x, y and z orientations. In addition, by varying currents in 3-D coils, the orientation of the magnetic fields can be varied. This way, it is now possible to analyse bias, parameter and operating field margins of SFQ cells in any direction of the magnetic field. \nTwo on-chip shielding solutions were analysed and developed. The conventional continuous superconductor \nlayer shield, dubbed the solid shield, and the grid shield. The grid shield resembles a Faraday \ncage and it is implemented by laying out bars of 2.5 μm width using the topmost layer in the Hypres0 \n4.5 kA/cm2 process. The solid shield is more effective against perpendicular (z-directed) magnetic fields \nthan against those in-plain (x and y-directed). In addition, the solid shield’s inclusion in SFQ cells results \nin the reduction of circuit inductance by up to 25 %. The grid shield is a very effective approach against \nin-plane magnetic fields. However, its effectiveness is inversely proportional to the spacing between grid \nbars. Compared to the solid shield, the grid shield has less effect on circuit inductance with a typical \nreduction of 8 % at a grid bar spacing of 5 μm. The large reduction in inductance can be overcome \nby making the inductors thinner and shorter. Shielding effectiveness of on-chip shields is enhanced by \nmaking ground contact vias from the shield layer to the ground plane. So far, uniformly grounded shields \nhave shown to be the most effective approach. \nThe solid shield improved the operating field margin of a DFF cell against a z-directed magnetic field \nfrom 30 μT to 531 μT, while the grid shield, of 5 μm grid spacing, improved the margins from 68 μT \nto 290 μT against an x-directed magnetic field. In the DC-SFQ cell, the operating field margin was \nimproved with a solid shield from 47 μT to 464 μT, against a z-directed magnetic field, while with a \ngrid shield, the improvement was from 211 μT to 381 μT, against an x-directed fields. \nTo further enhance the magnetic field tolerance of SFQ circuits, design tenets that target specific components, \nsuch as inductors, were analysed. Thin and narrow inductors have shown less coupling to \nexternal magnetic fields. In addition, moats have shown to influence OFM results depending on the \norientation of magnetic fields. \nThis work has delivered design and analysis methods for magnetic field tolerant SFQ circuits.
In recent years, nanofabrication technology is accelerating the miniaturization of atomic magnetometers, which is attracting widespread interest due to emerging applications in magnetocardiography and magnetoencephalography. However, it is challenging for CMOS-compatible magnetic coils to preserve the necessary optical aperture for pumping incidence, hindering further integration of the magnetometer to chip-scale. This article proposes an improved target-field method for the design of aperture-integrated biplanar coils tailored for microintegrated atomic magnetometers. Two stream functions with different side lengths and shared basis-function coefficients are predefined, and their difference is used to construct a new stream function for coil design. A 3-mm-diameter optical aperture is designed on the coil plane while maintaining high-magnetic-field uniformity. The proposed coils are fabricated through a CMOS-compatible process, and a miniaturized single-beam atomic magnetometer is constructed by combining our device with a 4-mm Rb vapor cell. Experimental results show that the noise floor of 25 fT/Hz1/2\mathrm{Hz}^{\mathrm {1/2}}Hz1/2is achieved with pumping light directly propagating through the optical aperture. Compared with a conventional Helmholtz coil, the maximum magnetic-field inhomogeneity is reduced from 10.7% to 2.9%. Our method is promising for on-cell integration of multiple magnetic-field coils, which pave the way for further miniaturization of chip-scale atomic magnetometer systems.
Recently, there is a growing interest in non-uniform coupled SQUID devices in the science community. Similar to how antenna array technology has moved from uniform arrays to non-uniform, sparsely populated arrays, the traditional uniform SQUID arrays evolves to an unconventional structure making these mesoscopic quantum devices (for RF reception) a feasible concept. The focus of this work covers theoretical and numerical computations which exploits well-designed coupling schemes to modeling the dynamics of the device where the behavior of the non-periodic voltage response related to the external flux exhibits an anti-peak which is present only around the zero applied magnetic field. It is know that many nonlinear dynamical systems are highly sensitive to small external perturbations, especially when they are near the onset of a bifurcation. Exploring parameter variations, such as; inductive coupling between neighboring elements, unconventional grating and fabrication parameters may lead to a significant performance enhancement. There are theoretical indications that variations in coupling could provide very high dynamic range. Application of these devices with the ability to detect and amplify will result in a new generation of electrically small antennas.