Laser cooling to micro-Kelvin temperatures requires a laser with active frequency stabilization. The linewidth of an atomic transition sets a lower bound on the Doppler cooling temperature. The 2s-2p transition in lithium-6 has a Doppler temperature of ~140 μK In contrast, the 2s-3p transition has a narrower linewidth and thus provides a lower temperature limit of ~20 μK. We present a method for stabilizing a laser to an atomic line in a vapor cell using modulation transfer spectroscopy and a home-built lock-in amplifier. Our results demonstrate successful locking of a 323 nm laser to the 2s-3p transition. The stabilized laser provides a second stage of magneto-optical trapping that results in a factor of ∼5 increase in the phase space density before evaporating to degeneracy in an optical dipole trap.
We have used the narrow $2{S}_{1/2}\ensuremath{\rightarrow}3{P}_{3/2}$ transition in the ultraviolet (uv) to laser cool and magneto-optically trap (MOT)
6Li atoms. Laser cooling of lithium is usually performed on the $2{S}_{1/2}\ensuremath{\rightarrow}2{P}_{3/2}$ (D2) transition, and temperatures of $\ensuremath{\sim}$300 $\ensuremath{\mu}$K are typically achieved. The linewidth of the uv transition is seven times narrower than the D2 line, resulting in lower laser cooling temperatures. We demonstrate that a MOT operating on the uv transition reaches temperatures as low as 59 $\ensuremath{\mu}$K. Furthermore, we find that the light shift of the uv transition in an optical dipole trap at 1070 nm is small and blueshifted, facilitating efficient loading from the uv MOT. Evaporative cooling of a two spin-state mixture of
6Li in the optical trap produces a quantum degenerate Fermi gas with $3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ atoms in a total cycle time of only 11 s.
The diode laser system for laser cooling on the 1S 0 → 3P1 intercombination line of strontium discussed in this thesis allows us to cool and trap an atomic strontium sample to 15 muK. Samples in this temperature range are useful for the development of the next generation of atomic frequency standards, cold collision studies, and as a step towards quantum degeneracy. This laser system consists of a Littrow configuration external-cavity diode laser, which is frequency locked to a high finesse cavity. The cavity is subsequently locked to an absorption feature to produce a few mW of tunable, stabilized, single mode power at the target wavelength. We present the design and characterization of this system, including a linewidth measurement of 70 kHz, as well as preliminary results from cooling and trapping.